3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
klipper/docs
History
Grigori Goronzy 5c7c8c984b stm32f1: add SPI support 
Add basic SPI support and associated documentation.

v2: remove baud rate check, fix baud rate calculations
v3: finish transaction with BSY check, disable SPI when not in use

Signed-off-by: Grigori Goronzy <greg@chown.ath.cx>
 		2018-07-07 11:05:33 -04:00
..
img docs: Update documentation with iterative solver changes 2018-06-20 09:26:10 -04:00
prints docs: Minor update to square.scad 2018-01-02 21:56:29 -05:00
CONTRIBUTING.md docs: Add a CONTRIBUTING document 2017-12-24 12:33:01 -05:00
Code_Overview.md docs: Minor updates to Code_Overview.md 2018-07-03 13:33:48 -04:00
Config_checks.md docs: Recommend running PID_CALIBRATE in Config_checks.md 2018-03-18 12:43:41 -04:00
Contact.md docs: Try to make the klippy.log bug reporting more clear 2018-01-21 13:08:31 -05:00
Debugging.md docs: Update Debugging.md with information on logextract 2018-01-11 13:48:40 -05:00
FAQ.md docs: Update documentation to note use of /dev/serial/by-path/ 2018-06-01 17:22:03 -04:00
Features.md docs: Add LPC1768 benchmarks to Features.md document 2018-05-25 11:52:13 -04:00
G-Codes.md tmc2130: Add a DUMP_TMC helper command 2018-06-30 19:01:56 -04:00
Installation.md docs: Update installation document for OctoPrint 1.3.7 2018-04-09 11:39:36 -04:00
Kinematics.md docs: Update documentation with iterative solver changes 2018-06-20 09:26:10 -04:00
MCU_Commands.md basecmd: Rename get_status to get_clock 2018-05-29 10:57:29 -04:00
Overview.md docs: Add a G-Codes.md file with the list of available commands 2018-03-08 14:11:20 -05:00
Pressure_Advance.md docs: Note pressure_advance over 0.20 is unlikely to improve quality 2018-01-08 11:07:26 -05:00
Protocol.md docs: Use only single space at start of new sentence 2017-05-01 11:58:32 -04:00
README.md docs: Improve documentation for those starting in docs/ 2017-04-27 16:05:26 -04:00
Releases.md docs: Update release notes for v0.6.0 release 2018-03-31 14:04:39 -04:00
Todo.md docs: Remove lpc176x item from Todo 2018-05-25 13:56:54 -04:00
beaglebone.md pru: Disable ADC reading directly from the PRU 2018-06-27 12:10:25 -04:00
developer-certificate-of-origin docs: Add a CONTRIBUTING document 2017-12-24 12:33:01 -05:00
issue_template.md docs: Add github issue template 2018-01-31 14:30:05 -05:00
stm32f1.md stm32f1: add SPI support 2018-07-07 11:05:33 -04:00

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.