klipper

History

Sami Haahtinen 3417940fd8 hall_filament_width_sensor: max filament diameter Add support for maximum filament diameter to hall filament width sensor. If the diameter of the filament diameter is larger than the limit, the virtual runout sensor will trigger. The default value is set to maximum flow adjustment threshold to prevent oversized filament from clogging. Signed-off-by: Sami Haahtinen <ressu@ressukka.net>		2023-12-17 11:13:33 -05:00
..
_klipper3d	…
img	…
prints	docs: Suggested improvements to Input Shaper tuning guide	2020-07-29 21:28:18 -04:00
API_Server.md	…
Axis_Twist_Compensation.md	…
BLTouch.md	…
Beaglebone.md	…
Bed_Level.md	…
Bed_Mesh.md	…
Benchmarks.md	…
Bootloader_Entry.md	…
Bootloaders.md	…
CANBUS.md	…
CANBUS_Troubleshooting.md	…
CANBUS_protocol.md	…
CNAME	…
CONTRIBUTING.md	…
Code_Overview.md	…
Command_Templates.md	…
Config_Changes.md	…
Config_Reference.md	…
Config_checks.md	Config_checks: Missing ! in pin inversion example in Verify endstops	2023-10-19 13:13:57 -04:00
Contact.md	…
Debugging.md	…
Delta_Calibrate.md	…
Endstop_Phase.md	…
Example_Configs.md	…
Exclude_Object.md	…
FAQ.md	…
Features.md	…
G-Codes.md	…
Hall_Filament_Width_Sensor.md	…
Installation.md	…
Kinematics.md	…
MCU_Commands.md	…
Manual_Level.md	docs: Note that "minutes" in screws_tilt_adjust means minutes of a clock face	2022-04-05 20:35:56 -04:00
Measuring_Resonances.md	…
Multi_MCU_Homing.md	…
Overview.md	…
Packaging.md	…
Pressure_Advance.md	…
Probe_Calibrate.md	…
Protocol.md	…
README.md	…
RPi_microcontroller.md	…
Releases.md	…
Resonance_Compensation.md	…
Rotation_Distance.md	…
SDCard_Updates.md	…
Skew_Correction.md	…
Slicers.md	…
Sponsors.md	…
Status_Reference.md	…
TMC_Drivers.md	tmc: Fix s2vs field formatters	2023-03-07 10:52:52 -05:00
TSL1401CL_Filament_Width_Sensor.md	…
Using_PWM_Tools.md	…
developer-certificate-of-origin	…
index.md	…

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.