Клиппер
Go to file
Kevin O'Connor 61fbd193f9 gcode: Reset extrude_factor and extruder position on a tool change
The extrude_factor and extruder position are specific to the current
extruder, so reset them to default values on a Tn command.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-20 13:47:00 -04:00
config fan: Allow the fan shutdown_speed to be configured 2018-05-18 19:12:03 -04:00
docs extruder: Fix SET_PRESSURE_ADVANCE so that it works with multiple extruders 2018-05-20 12:52:19 -04:00
klippy gcode: Reset extrude_factor and extruder position on a tool change 2018-05-20 13:47:00 -04:00
lib Add STM32F103 port 2018-04-09 18:08:29 -04:00
scripts scripts: Add stm32flash to octopi-install.sh package list 2018-04-12 13:58:30 -04:00
src stepper: Introduce and use gpio_out_toggle_noirq() 2018-05-15 17:09:11 -04:00
test/configs test: Add STM32F1 compile test case 2018-04-09 19:23:55 -04:00
.gitignore Initial commit of source code. 2016-05-25 11:37:40 -04:00
.travis.yml test: Update travis build to include a basic klippy host test 2018-02-26 14:58:49 -05:00
COPYING Initial commit of source code. 2016-05-25 11:37:40 -04:00
Makefile build: Link objects ahead of libraries to avoid failures on some platforms 2018-02-25 10:39:06 -05:00
README.md docs: Add a features document 2016-12-20 22:31:46 -05:00

README.md

Welcome to the Klipper project!

This project implements a 3d-printer firmware. There are two parts to this firmware - code that runs on a micro-controller and code that runs on a host machine. The host software does the work to build a schedule of events, while the micro-controller software does the work to execute the provided schedule at the specified times.

See the features document to find out why you should use Klipper. To begin using Klipper start by installing it.

There is also developer documentation available.

License

Klipper is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

Klipper is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with Klipper. If not, see http://www.gnu.org/licenses/.