klipper/test/klippy
laurienzu 4c8d1b813c
config: Updated and created new TwoTrees configs to avoid confusion (#5365)
* Update and rename printer-twotrees-sapphire-pro-2020.cfg to printer-twotrees-sapphire-pro-sp-3.cfg

I renamed the file since the printer name now changed and is sold with this name, there is only one version so year can be removed.

-Added detailed instructions for flashing in the header.
-Corrected rotation distances for axes, it was wrong.
-Added gear ratio for extruder that is useful for future changes.
-Added heater fan to HE1 pins for automatic shutdown with temp.
-Reduced speed and accel for Z since a 2mm screw is used.

* Create printer-twotrees-sapphire-plus-sp-5-v1.1.cfg

I created the file since the printer name now changed and is sold with this name, there are 2 main versions (V1 and V1.1) so I will make 2 different configs for them since there are some hardware change and people are confused in what to change.

The difference with V1 is that all 2225 drivers are now used, since microsteps tables change for these drivers and by factory all jumpers are in the microstep setting is 32, people don't know this and will have half movement with the v1 config, there is a lot of confusion in communities so I think adding another file is the best option.

Signed-off-by:  Lorenzo Cascone <laurienzudesign@gmail.com>
2022-04-13 11:07:13 -04:00
..
sdcard_loop
bed_screws.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
bed_screws.test
bltouch.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
bltouch.test
commands.test
delta.test
delta_calibrate.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
delta_calibrate.test
dual_carriage.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
dual_carriage.test
extruders.cfg extruder_stepper: Do not default to synching with "extruder" at startup 2022-03-04 13:38:59 -05:00
extruders.test extruder: Add new SYNC_EXTRUDER_MOTION command 2022-02-10 13:24:21 -05:00
gcode_arcs.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
gcode_arcs.test
input_shaper.cfg test: Add an input_shaper module test case 2021-10-26 20:01:33 -04:00
input_shaper.test test: Add an input_shaper module test case 2021-10-26 20:01:33 -04:00
led.cfg test: Add an led test for led, neopixel, dotstar, pca9533, pca9632 configs 2022-03-31 13:08:12 -04:00
led.test test: Add an led test for led, neopixel, dotstar, pca9533, pca9632 configs 2022-03-31 13:08:12 -04:00
macros.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
macros.test
manual_stepper.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
manual_stepper.test
move.gcode
multi_z.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
multi_z.test
out_of_bounds.test
polar.test
printers.test config: Updated and created new TwoTrees configs to avoid confusion (#5365) 2022-04-13 11:07:13 -04:00
pwm.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
pwm.test
quad_gantry_level.test
rotary_delta_calibrate.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
rotary_delta_calibrate.test
screws_tilt_adjust.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
screws_tilt_adjust.test
sdcard_loop.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
sdcard_loop.test
temperature.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
temperature.test
tmc.cfg
tmc.test
z_tilt.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
z_tilt.test
z_virtual_endstop.cfg test: Update test case to not use pin_map 2021-10-24 21:11:53 -04:00
z_virtual_endstop.test