klipper/lib/same54/include/instance/ac.h

80 lines
4.5 KiB
C

/**
* \file
*
* \brief Instance description for AC
*
* Copyright (c) 2019 Microchip Technology Inc.
*
* \asf_license_start
*
* \page License
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the Licence at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* \asf_license_stop
*
*/
#ifndef _SAME54_AC_INSTANCE_
#define _SAME54_AC_INSTANCE_
/* ========== Register definition for AC peripheral ========== */
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
#define REG_AC_CTRLA (0x42002000) /**< \brief (AC) Control A */
#define REG_AC_CTRLB (0x42002001) /**< \brief (AC) Control B */
#define REG_AC_EVCTRL (0x42002002) /**< \brief (AC) Event Control */
#define REG_AC_INTENCLR (0x42002004) /**< \brief (AC) Interrupt Enable Clear */
#define REG_AC_INTENSET (0x42002005) /**< \brief (AC) Interrupt Enable Set */
#define REG_AC_INTFLAG (0x42002006) /**< \brief (AC) Interrupt Flag Status and Clear */
#define REG_AC_STATUSA (0x42002007) /**< \brief (AC) Status A */
#define REG_AC_STATUSB (0x42002008) /**< \brief (AC) Status B */
#define REG_AC_DBGCTRL (0x42002009) /**< \brief (AC) Debug Control */
#define REG_AC_WINCTRL (0x4200200A) /**< \brief (AC) Window Control */
#define REG_AC_SCALER0 (0x4200200C) /**< \brief (AC) Scaler 0 */
#define REG_AC_SCALER1 (0x4200200D) /**< \brief (AC) Scaler 1 */
#define REG_AC_COMPCTRL0 (0x42002010) /**< \brief (AC) Comparator Control 0 */
#define REG_AC_COMPCTRL1 (0x42002014) /**< \brief (AC) Comparator Control 1 */
#define REG_AC_SYNCBUSY (0x42002020) /**< \brief (AC) Synchronization Busy */
#define REG_AC_CALIB (0x42002024) /**< \brief (AC) Calibration */
#else
#define REG_AC_CTRLA (*(RwReg8 *)0x42002000UL) /**< \brief (AC) Control A */
#define REG_AC_CTRLB (*(WoReg8 *)0x42002001UL) /**< \brief (AC) Control B */
#define REG_AC_EVCTRL (*(RwReg16*)0x42002002UL) /**< \brief (AC) Event Control */
#define REG_AC_INTENCLR (*(RwReg8 *)0x42002004UL) /**< \brief (AC) Interrupt Enable Clear */
#define REG_AC_INTENSET (*(RwReg8 *)0x42002005UL) /**< \brief (AC) Interrupt Enable Set */
#define REG_AC_INTFLAG (*(RwReg8 *)0x42002006UL) /**< \brief (AC) Interrupt Flag Status and Clear */
#define REG_AC_STATUSA (*(RoReg8 *)0x42002007UL) /**< \brief (AC) Status A */
#define REG_AC_STATUSB (*(RoReg8 *)0x42002008UL) /**< \brief (AC) Status B */
#define REG_AC_DBGCTRL (*(RwReg8 *)0x42002009UL) /**< \brief (AC) Debug Control */
#define REG_AC_WINCTRL (*(RwReg8 *)0x4200200AUL) /**< \brief (AC) Window Control */
#define REG_AC_SCALER0 (*(RwReg8 *)0x4200200CUL) /**< \brief (AC) Scaler 0 */
#define REG_AC_SCALER1 (*(RwReg8 *)0x4200200DUL) /**< \brief (AC) Scaler 1 */
#define REG_AC_COMPCTRL0 (*(RwReg *)0x42002010UL) /**< \brief (AC) Comparator Control 0 */
#define REG_AC_COMPCTRL1 (*(RwReg *)0x42002014UL) /**< \brief (AC) Comparator Control 1 */
#define REG_AC_SYNCBUSY (*(RoReg *)0x42002020UL) /**< \brief (AC) Synchronization Busy */
#define REG_AC_CALIB (*(RwReg16*)0x42002024UL) /**< \brief (AC) Calibration */
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* ========== Instance parameters for AC peripheral ========== */
#define AC_COMPCTRL_MUXNEG_OPAMP 7 // OPAMP selection for MUXNEG
#define AC_FUSES_BIAS1 // PAIR1 Bias Calibration
#define AC_GCLK_ID 32 // Index of Generic Clock
#define AC_IMPLEMENTS_VDBLR 0 // VDoubler implemented ?
#define AC_NUM_CMP 2 // Number of comparators
#define AC_PAIRS 1 // Number of pairs of comparators
#define AC_SPEED_LEVELS 2 // Number of speed values
#endif /* _SAME54_AC_INSTANCE_ */