klipper

Клиппер

Go to file

Manuel Fichtner 5d52a3b19f config: Anycubic Vyper (#4740 ) This commit contains a configuration for the Anycubic Vyper printer from 2021. It uses a clone of the STM32F103 chip named GD32F103. There are 2 Mainboard versions out there v0.0.5 and v0.0.6, this config has been tested with the v0.0.6 only. It should probably work for v0.0.5 as well since there are no different changes in the Anycubic Marlin firmware. The LCD is not supported yet (might work, but didn't try yet). Signed-off-by: Marc Neuhaus <marc@neuhaus.nrw> Signed-off-by: Manuel Fichtner <manuel.fichtner@me.com>		2021-10-11 16:26:14 -04:00
.github	workflows: Fix typo in stale-issue-bot	2021-08-17 20:53:32 -04:00
config	config: Anycubic Vyper (#4740 )	2021-10-11 16:26:14 -04:00
docs	tmc: add current values to get_status() (#4696 )	2021-10-11 12:03:08 -04:00
klippy	tmc: add current values to get_status() (#4696 )	2021-10-11 12:03:08 -04:00
lib	lib: Added cmsis libraries for stm32h7	2021-10-06 18:17:06 -04:00
scripts	configfile: Use Python2's ConfigParser when running on Python2	2021-10-09 19:37:48 -04:00
src	config: Anycubic Vyper (#4740 )	2021-10-11 16:26:14 -04:00
test	config: Anycubic Vyper (#4740 )	2021-10-11 16:26:14 -04:00
.gitignore	util: Fix versioning when gitdir is absent (#809 )	2018-10-27 10:44:38 -04:00
COPYING	Initial commit of source code.	2016-05-25 11:37:40 -04:00
Makefile	Makefile: Include debug symbols in the .elf	2021-06-08 19:29:16 -04:00
README.md	Revert "README: Fix links to www.klipper3d.org"	2021-07-27 19:00:01 -04:00

README.md

Welcome to the Klipper project!

https://www.klipper3d.org/

Klipper is a 3d-Printer firmware. It combines the power of a general purpose computer with one or more micro-controllers. See the features document for more information on why you should use Klipper.

To begin using Klipper start by installing it.

Klipper is Free Software. See the license or read the documentation.