| .. |
|
img
|
docs: Try to make the klippy.log bug reporting more clear
|
2018-01-21 13:08:31 -05:00 |
|
prints
|
docs: Minor update to square.scad
|
2018-01-02 21:56:29 -05:00 |
|
CONTRIBUTING.md
|
docs: Add a CONTRIBUTING document
|
2017-12-24 12:33:01 -05:00 |
|
Code_Overview.md
|
docs: Add a section on time handling to Code_Overview.md
|
2017-09-27 15:11:15 -04:00 |
|
Config_checks.md
|
docs: Update Config_checks.md
|
2018-02-07 22:24:32 -05:00 |
|
Contact.md
|
docs: Try to make the klippy.log bug reporting more clear
|
2018-01-21 13:08:31 -05:00 |
|
Debugging.md
|
docs: Update Debugging.md with information on logextract
|
2018-01-11 13:48:40 -05:00 |
|
FAQ.md
|
docs: Add a FAQ item on steps to upgrade the software
|
2018-01-12 18:38:49 -05:00 |
|
Features.md
|
docs: Reword performance paragraph in Features.md
|
2017-09-27 13:59:47 -04:00 |
|
Installation.md
|
docs: Update installation document with pointers to FAQ
|
2018-01-04 13:29:17 -05:00 |
|
Kinematics.md
|
toolhead: Permit look-ahead between Z moves
|
2017-09-03 15:46:48 -04:00 |
|
MCU_Commands.md
|
gpiocmds: Allow the start value for a pin to differ from the default_value
|
2017-10-12 11:59:27 -04:00 |
|
Overview.md
|
docs: Add an initial configuration checklist document
|
2017-12-26 20:54:37 -05:00 |
|
Pressure_Advance.md
|
docs: Note pressure_advance over 0.20 is unlikely to improve quality
|
2018-01-08 11:07:26 -05:00 |
|
Protocol.md
|
…
|
|
|
README.md
|
…
|
|
|
Releases.md
|
docs: Note version 0.5.0 release
|
2017-10-25 11:27:20 -04:00 |
|
Todo.md
|
docs: Remove bed level probe from todo
|
2018-01-28 20:36:04 -05:00 |
|
beaglebone.md
|
docs: Point to beaglebone.md from the main installation document
|
2017-10-11 21:03:13 -04:00 |
|
developer-certificate-of-origin
|
docs: Add a CONTRIBUTING document
|
2017-12-24 12:33:01 -05:00 |
|
issue_template.md
|
docs: Add github issue template
|
2018-01-31 14:30:05 -05:00 |
268d1cb27c