3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
klipper/docs
History
Kevin O'Connor 80dc1dfcc1 docs: Remove documentation for "custom" command blocks 
It should no longer be necessary to configure "custom" commands during
mcu setup.  The ad5206 and static_digital_output config sections
should provide similar functionality.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 		2017-08-26 18:27:21 -04:00
..
img docs: Kinematics document image updates 2017-04-27 12:00:09 -04:00
prints docs: Add initial Pressure Advance tuning document 2017-04-19 16:02:11 -04:00
Code_Overview.md docs: Update Code_Overview.md with PRU and command_dispatch() changes 2017-08-11 12:06:19 -04:00
Debugging.md avr: Add SIMULAVR build option; don't show WATCHDOG or SERIAL_BAUD_U2X 2017-05-28 11:04:59 -04:00
Features.md pru: Compile the irq_poll() function with -O2 optimization 2017-08-15 11:05:30 -04:00
Installation.md docs: Make it clear a RESTART is likely needed in Installation document 2017-05-03 11:15:27 -04:00
Kinematics.md docs: Update Kinematics.md with regards to stepper torque limits 2017-07-19 19:09:14 -04:00
MCU_Commands.md docs: Remove documentation for "custom" command blocks 2017-08-26 18:27:21 -04:00
Overview.md docs: Improve documentation for those starting in docs/ 2017-04-27 16:05:26 -04:00
Pressure_Advance.md docs: Note how to handle odd corner in Pressure_Advance.md 2017-05-25 13:39:16 -04:00
Protocol.md docs: Use only single space at start of new sentence 2017-05-01 11:58:32 -04:00
README.md docs: Improve documentation for those starting in docs/ 2017-04-27 16:05:26 -04:00
Releases.md docs: Note version 0.4.0 release 2017-05-03 14:32:36 -04:00
Todo.md docs: Remove documentation for "custom" command blocks 2017-08-26 18:27:21 -04:00
beaglebone.md pru: Add documentation and install scripts for running on the PRU 2017-07-05 14:21:32 -04:00

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.