klipper/klippy
Arksine 0c379d060f skew_correction: add SKEW_PROFILE gcode
Add profile managment similar to that of bed_mesh.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
2019-06-29 10:58:46 -04:00
..
chelper polar: Add initial support for multiple bed rotations 2019-06-28 10:00:40 -04:00
extras skew_correction: add SKEW_PROFILE gcode 2019-06-29 10:58:46 -04:00
kinematics polar: Add initial support for multiple bed rotations 2019-06-28 10:00:40 -04:00
clocksync.py mcu: Support minclock in send_with_response() requests 2019-06-21 21:42:20 -04:00
configfile.py configfile: Add "include" support (#1359) 2019-03-22 20:31:40 -04:00
console.py serialhdl: Add a get_msgparser() method 2019-06-21 18:14:00 -04:00
gcode.py gcode: Add support for stacked transforms 2019-06-26 20:16:35 -04:00
heater.py heater: Wrap code to 80 columns 2019-02-27 13:09:24 -05:00
homing.py homing: Catch the more generic CommandError during homing 2019-06-06 10:08:58 -04:00
klippy.py klippy: Only set the run_result if it hasn't already been set 2019-06-28 10:21:50 -04:00
mathutil.py gcode: Change respond_info() to log by default 2019-03-04 13:04:18 -05:00
mcu.py endstop_phase: Fix endstop_phase on trinamic drivers that aren't inverted 2019-06-21 22:56:16 -04:00
msgproto.py bus: Support bus enumerations and add support for reserved pins 2019-04-04 18:29:31 -04:00
parsedump.py build: Request python2 for all directly executed python binaries 2017-06-27 20:26:02 -04:00
pins.py tmc2208: Add support for using an analog mux to access TMC uarts 2019-06-12 22:14:41 -04:00
queuelogger.py klippy: Automatically clear rollover_info on each restart 2018-04-03 13:18:52 -04:00
reactor.py reactor: Fix some corner cases with self._next_timer handling 2019-06-19 21:12:34 -04:00
serialhdl.py mcu: Support minclock in send_with_response() requests 2019-06-21 21:42:20 -04:00
stepper.py stepper: Add support for providing a list of pins to enable 2019-06-28 16:59:26 -04:00
toolhead.py toolhead: Just warn if M204 doesn't contain valid S, P, or T 2019-06-21 12:53:47 -04:00
util.py util: Ignore errors in clear_hupcl (allows OSX to run) 2019-05-20 16:49:42 -04:00