3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Клиппер
2,463 Commits 1 Branch 0 Tags 27 MiB
C 96.7%
Python 2.8%
C++ 0.3%
Go to file
Kevin O'Connor 4f889ecd93 stm32: Fix usbfs rx buffer sizing 
The usbfs receive buffers must also have space for the 2 byte crc at
the end of a transmission.  This fixes an error that could lead to
lost messages from mcu to host (resulting in bytes_invalid increasing
in stats) on the stm32f103.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 		2019-09-16 19:33:06 -04:00
config config: Add display section to printer-wanhao-duplicator-6-2016.cfg 2019-09-14 19:52:19 -04:00
docs docs: Add additional "no delay" benchmarks to Benchmarks.md 2019-09-08 10:37:25 -04:00
klippy temperature_fan: Allow min_speed to be set to zero 2019-09-14 15:35:09 -04:00
lib lib: No need to make lpc176x SystemInit() externally visible 2019-09-06 13:49:16 -04:00
scripts buildcommands: Match DECL_X names to the actual C macro names 2019-08-22 13:26:30 -04:00
src stm32: Fix usbfs rx buffer sizing 2019-09-16 19:33:06 -04:00
test test: Add initial test case for gcode_arcs support 2019-09-13 12:05:15 -04:00
.gitignore util: Fix versioning when gitdir is absent (#809) 2018-10-27 10:44:38 -04:00
.travis.yml test: Update .travis.yml to list apt packages one per line 2018-08-17 09:47:57 -04:00
COPYING Initial commit of source code. 2016-05-25 11:37:40 -04:00
Makefile Makefile: Use "tr -s" in compile_time_request.txt generation 2019-08-22 11:40:02 -04:00
README.md docs: Update main README file to point to website 2019-04-20 13:43:35 -04:00

README.md

Welcome to the Klipper project!

Klipper

https://www.klipper3d.org/

Klipper is a 3d-Printer firmware. It combines the power of a general purpose computer with one or more micro-controllers. See the features document for more information on why you should use Klipper.

To begin using Klipper start by installing it.

Klipper is Free Software. See the license or read the documentation.