3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
klipper/klippy/extras
History
Alan Lord 7d4df65920
ds18b20: new module for 1-wire temperature sensor (#3462) 
Initial commit of code to support 1-wire (Dallas) sensors such
as the DS18B20. Requires Linux kernel drivers to create a file
in /sysfs which is read by this module, and temperature
typically returned to a temperature_fan.

Signed-off-by: Alan Lord <alanslists@gmail.com>
Signed-off-by: Josh Headapohl <joshhead@gmail.com>
 		2021-02-02 14:34:56 -05:00
..
display hd44780: Add hd44780 protocol init config 2021-01-31 19:35:40 -05:00
__init__.py
…
ad5206.py extras: Use "from . import module" for relative imports 2020-06-15 17:15:53 -04:00
adc_scaled.py adc_scaled: Add support for Duet2 Maestro "vref monitoring" 2020-09-09 22:20:54 -04:00
adc_temperature.py spi_temperature: Simplify and comment MAX31865 temperature calculations 2020-09-02 10:04:35 -04:00
adxl345.py adxl345: Add accelerometer chip name to the raw data file name 2021-02-02 14:13:24 -05:00
bed_mesh.py webhooks: Fix use of deprecated Exception.message attribute (#3781) 2021-01-17 22:37:41 -05:00
bed_screws.py homing: Prefer printer.command_error() instead of homing.CommandError() 2020-09-04 12:10:36 -04:00
bed_tilt.py gcode_move: Move GCodeMove class from gcode.py to new extras module 2020-08-20 21:03:22 -04:00
bltouch.py bltouch: Fix bug causing incorrect position when "stow_on_each_sample=False" 2020-10-24 00:22:58 -04:00
bme280.py bme280: Implement support for min_temp/max_temp checks 2021-02-01 11:27:16 -05:00
board_pins.py board_pins: Use an explicit parameter to specify mcu name(s) 2020-11-20 12:00:36 -05:00
bus.py mcu: Introduce new lookup_query_command() command wrapper 2020-02-20 13:24:53 -05:00
buttons.py buttons: Improve python3 compatibility 2020-09-04 19:33:04 -04:00
controller_fan.py heater_fan: Fix typo causing excessive cpu usage 2020-12-01 12:31:22 -05:00
delayed_gcode.py klippy: Rename try_load_module() to load_object() 2020-05-08 11:05:14 -04:00
delta_calibrate.py delta_calibrate: Don't error on an invalid kinematic guess 2020-09-17 22:41:13 -04:00
display_status.py display_status: fix M117 checksum trimming (#3377) 2020-09-28 10:11:05 -04:00
dotstar.py dotstar: Don't flush the lookahead queue on a SET_LED command 2020-10-29 12:00:28 -04:00
ds18b20.py ds18b20: new module for 1-wire temperature sensor (#3462) 2021-02-02 14:34:56 -05:00
endstop_phase.py homing: Make homing.py an "extras" module 2021-01-08 14:01:34 -05:00
extruder_stepper.py extruder_stepper: Don't directly access extruder member variables 2020-06-06 14:41:15 -04:00
fan.py fan: Separate out the part cooling fan code from the generic fan code 2020-07-05 21:04:04 -04:00
fan_generic.py fan_generic: Add support for named fans and gcode to control them (#3054) 2020-08-07 11:39:44 -04:00
filament_switch_sensor.py filament_switch_sensor: report "enabled" state via get_status 2020-08-01 15:56:51 -04:00
firmware_retraction.py firmware_retraction: Use new GCodeCommand wrappers 2020-05-05 11:08:11 -04:00
force_move.py gcode: Automatically call reset_last_position() on a toolhead set_position() 2020-08-20 21:03:22 -04:00
gcode_arcs.py gcode_move: Move GCodeMove class from gcode.py to new extras module 2020-08-20 21:03:22 -04:00
gcode_button.py gcode_button: Add support for analog buttons 2020-09-09 14:21:30 -04:00
gcode_macro.py gcode_macro: Use deepcopy() on get_status() results 2021-01-20 16:25:25 -05:00
gcode_move.py homing: Make homing.py an "extras" module 2021-01-08 14:01:34 -05:00
hall_filament_width_sensor.py hall_filament_width_sensor: Fix race condition (#3790) 2021-01-22 13:41:34 -05:00
heater_bed.py klippy: Rename try_load_module() to load_object() 2020-05-08 11:05:14 -04:00
heater_fan.py heater_fan: Fix typo causing excessive cpu usage 2020-12-01 12:31:22 -05:00
heater_generic.py klippy: Rename try_load_module() to load_object() 2020-05-08 11:05:14 -04:00
heaters.py ds18b20: new module for 1-wire temperature sensor (#3462) 2021-02-02 14:34:56 -05:00
homing.py homing: Fix references to CommandError() 2021-01-11 10:01:14 -05:00
homing_heaters.py klippy: Rename try_load_module() to load_object() 2020-05-08 11:05:14 -04:00
homing_override.py homing: Make homing.py an "extras" module 2021-01-08 14:01:34 -05:00
htu21d.py htu21d: Implement support for min_temp/max_temp checks 2021-02-01 11:30:27 -05:00
idle_timeout.py klippy: Rename try_load_module() to load_object() 2020-05-08 11:05:14 -04:00
input_shaper.py input_shaper: Simplify input shaper type reporting 2020-12-01 11:36:37 -05:00
lm75.py lm75: Implement support for min_temp/max_temp checks 2021-02-01 10:37:19 -05:00
manual_probe.py manual_probe: Use configfile note_valid=False when inspecting Z position_endstop 2020-12-13 10:41:40 -05:00
manual_stepper.py homing: Prefer printer.command_error() instead of homing.CommandError() 2020-09-04 12:10:36 -04:00
mcp4018.py mcp4018: Add initial support for the mcp4018 digipot 2019-02-16 08:16:37 -05:00
mcp4451.py extras: Use "from . import module" for relative imports 2020-06-15 17:15:53 -04:00
mcp4728.py extras: Use "from . import module" for relative imports 2020-06-15 17:15:53 -04:00
multi_pin.py mcu: Add support for changing cycle_time in set_pwm() 2020-09-26 20:55:56 -04:00
neopixel.py neopixel: Don't wait for responses when in debug mode. 2020-12-01 11:36:37 -05:00
output_pin.py output_pin: Don't flush lookahead queue on a SET_PIN command 2020-11-13 18:29:41 -05:00
pause_resume.py webhooks: Remove "method" parameter from webhook requests 2020-08-16 13:20:25 -04:00
pid_calibrate.py pid_calibrate: Update for improved python3 compatibility 2020-09-04 19:30:18 -04:00
print_stats.py print_stats: exclude time prior to first extrusion from "print_duration" 2020-11-13 20:48:15 -05:00
probe.py homing: Make homing.py an "extras" module 2021-01-08 14:01:34 -05:00
quad_gantry_level.py quad_gantry_level: Add additional comments on how leveling works 2020-09-03 12:09:02 -04:00
query_adc.py query_adc: Use new GCodeCommand wrappers 2020-05-05 11:08:11 -04:00
query_endstops.py gcode_macro: Use deepcopy() on get_status() results 2021-01-20 16:25:25 -05:00
replicape.py pca9685: Use move queue for pwm updates 2020-12-04 16:10:13 -05:00
resonance_tester.py resonance_tester: Increase test max_accel to 10K and max_freq to 133 Hz 2021-02-02 14:13:24 -05:00
respond.py respond: Use new GCodeCommand wrappers 2020-05-05 11:08:11 -04:00
rpi_temperature.py rpi_temperature: Fix time reporting of temperature measurements 2021-01-24 15:37:37 -05:00
safe_z_home.py homing: Make homing.py an "extras" module 2021-01-08 14:01:34 -05:00
samd_sercom.py samd_sercom: fix pin enumeration error when mcu is specified 2019-09-17 13:28:57 -04:00
save_variables.py gcode_macro: Use deepcopy() on get_status() results 2021-01-20 16:25:25 -05:00
screws_tilt_adjust.py extras: Use "from . import module" for relative imports 2020-06-15 17:15:53 -04:00
servo.py servo: Set initial value via mcu_servo.setup_start_value() 2020-07-25 11:39:39 -04:00
shaper_calibrate.py shaper_calibrate: Choose input shapers accounting smoothing 2020-12-22 18:37:41 -05:00
skew_correction.py gcode: Split G0/G1 command handling to new gcode_move class 2020-08-20 21:03:22 -04:00
spi_temperature.py spi_temperature: Improve handling of min_temp/max_temp overflows 2021-02-01 10:37:19 -05:00
static_digital_output.py
…
statistics.py statistics: Exit loop as soon as MemAvailable found 2020-03-22 22:04:40 -04:00
stepper_enable.py gcode: Report the final print_time in debuginput mode 2020-07-30 12:53:59 -04:00
sx1509.py mcu: Add support for changing cycle_time in set_pwm() 2020-09-26 20:55:56 -04:00
temperature_fan.py temperature_fan: Add MAX_SPEED and MIN_SPEED to SET_TEMPERATURE_FAN_TARGET command (#3873) 2021-02-02 14:30:04 -05:00
temperature_mcu.py temperature_mcu: Improve handling when in debug output mode 2021-01-24 15:28:16 -05:00
temperature_sensor.py temperature_sensor: Report temperature in stats 2020-12-06 21:55:26 -05:00
thermistor.py thermistor: Add support for the board thermistor on the Einsy Rambo 2020-10-08 15:25:09 -04:00
tmc.py endstop_phase: Obtain phases directly from stepper microsteps config 2020-12-18 10:30:32 -05:00
tmc2130.py tmc5160: diag0 support (#3159) 2020-08-09 08:17:51 -04:00
tmc2208.py extras: Use "from . import module" for relative imports 2020-06-15 17:15:53 -04:00
tmc2209.py tmc5160: diag0 support (#3159) 2020-08-09 08:17:51 -04:00
tmc2660.py extras: Use "from . import module" for relative imports 2020-06-15 17:15:53 -04:00
tmc5160.py tmc5160: diag0 support (#3159) 2020-08-09 08:17:51 -04:00
tmc_uart.py mcu: Avoid using "async" for variables as it conflicts with Python3 2020-06-15 17:15:53 -04:00
tsl1401cl_filament_width_sensor.py hall_filament_width_sensor: Fix race condition (#3790) 2021-01-22 13:41:34 -05:00
tuning_tower.py gcode_move: Move GCodeMove class from gcode.py to new extras module 2020-08-20 21:03:22 -04:00
verify_heater.py docs: Move config reference information to new Config_Reference.md 2020-11-18 20:10:21 -05:00
virtual_sdcard.py gcode: Split G0/G1 command handling to new gcode_move class 2020-08-20 21:03:22 -04:00
z_tilt.py gcode: Automatically call reset_last_position() on a toolhead set_position() 2020-08-20 21:03:22 -04:00