Tircown 4d559633e3 kinematics: Add dual_carriage to hybrid-corexyz (#4296) ... - Add dual_carriage abilities for hybrid-corexy and hybrid-corexz - Introduce the module idex_mode - Fix add_stepper to the correct rail in hybrid-corexy Signed-off-by: Fabrice GALLET <tircown@gmail.com>		2021-06-27 18:37:05 -04:00
..
chelper	kinematics: Add dual_carriage to hybrid-corexyz (#4296)	2021-06-27 18:37:05 -04:00
extras	bltouch: Ensure the z_offset is not negative	2021-06-22 15:30:25 -04:00
kinematics	kinematics: Add dual_carriage to hybrid-corexyz (#4296)	2021-06-27 18:37:05 -04:00
clocksync.py	msgblock: Add clock estimation helper functions	2021-06-09 18:58:35 -04:00
configfile.py	configfile: Add printer.configfile.settings command template parameter	2021-01-20 16:25:25 -05:00
console.py	console: Add support for connecting via CAN bus	2021-03-13 11:29:41 -05:00
gcode.py	gcode: Update gcode descriptions (#4335)	2021-06-02 10:45:27 -04:00
klippy.py	klippy: Add a newline between initial error message and hint text	2021-06-10 21:30:09 -04:00
mathutil.py	…
mcu.py	homing: Check for failures during multi-endstop homing	2021-06-09 18:58:35 -04:00
msgproto.py	mcu: Raise config_error (not protocol error) on pin enumeration errors	2021-06-09 18:58:26 -04:00
parsedump.py	…
pins.py	…
queuelogger.py	…
reactor.py	…
serialhdl.py	msgblock: Add clock estimation helper functions	2021-06-09 18:58:35 -04:00
stepper.py	stepper: Restore mcu_position on set_stepper_kinematics() and set_step_dist()	2021-06-11 23:13:05 -04:00
toolhead.py	toolhead: Do not limit SET_VELOCITY_LIMIT to values specified in config	2021-04-30 11:26:19 -04:00
util.py	…
webhooks.py	webhooks: Fix use of deprecated Exception.message attribute (#3781)	2021-01-17 22:37:41 -05:00