klipper

History

Kevin O'Connor 47e45ab391 docs: Note the use of gcode_macro in G-Codes.md Signed-off-by: Kevin O'Connor <kevin@koconnor.net>		2018-10-28 10:38:03 -04:00
..
img	…
prints	…
Bootloaders.md	…
CONTRIBUTING.md	…
Code_Overview.md	…
Config_checks.md	…
Contact.md	…
Debugging.md	…
Delta_Calibrate.md	delta_calibrate: Do not automatically run G28 on DELTA_CALIBRATE	2018-10-22 11:26:01 -04:00
Endstop_Phase.md	tmc2660: Add endstop phase detection functionality to TMC2660 extra (#816 )	2018-10-24 16:01:12 -04:00
FAQ.md	…
Features.md	…
G-Codes.md	docs: Note the use of gcode_macro in G-Codes.md	2018-10-28 10:38:03 -04:00
Installation.md	…
Kinematics.md	…
MCU_Commands.md	…
Overview.md	…
Packaging.md	util: Fix versioning when gitdir is absent (#809 )	2018-10-27 10:44:38 -04:00
Pressure_Advance.md	docs: Update pressure advance doc to note it only impacts the extruder	2018-10-25 19:09:47 -04:00
Protocol.md	…
README.md	…
Releases.md	…
beaglebone.md	…
developer-certificate-of-origin	…
issue_template.md	…
stm32f1.md	docs: Update stm32f1.md - usb is now supported.	2018-10-22 13:22:58 -04:00

Welcome to the Klipper documentation. The overview document is a good starting point.