3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
klipper/docs
History
Kevin O'Connor 15248706ae chelper: Move the host C code to a new klippy/chelper/ directory 
Move the C code out of the main klippy/ directory and into its own
directory.  This reduces the clutter in the main klippy directory.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 		2018-04-30 11:44:53 -04:00
..
img docs: Try to make the klippy.log bug reporting more clear 2018-01-21 13:08:31 -05:00
prints docs: Minor update to square.scad 2018-01-02 21:56:29 -05:00
CONTRIBUTING.md docs: Add a CONTRIBUTING document 2017-12-24 12:33:01 -05:00
Code_Overview.md chelper: Move the host C code to a new klippy/chelper/ directory 2018-04-30 11:44:53 -04:00
Config_checks.md docs: Recommend running PID_CALIBRATE in Config_checks.md 2018-03-18 12:43:41 -04:00
Contact.md docs: Try to make the klippy.log bug reporting more clear 2018-01-21 13:08:31 -05:00
Debugging.md docs: Update Debugging.md with information on logextract 2018-01-11 13:48:40 -05:00
FAQ.md docs: Improve FAQ update software entry (use make menuconfig ; make clean) 2018-04-25 10:29:55 -04:00
Features.md docs: Add STM32F103 benchmarks to the Features document 2018-04-20 11:19:37 -04:00
G-Codes.md toolhead: Add a SET_VELOCITY_LIMIT command 2018-04-20 22:36:05 -04:00
Installation.md docs: Update installation document for OctoPrint 1.3.7 2018-04-09 11:39:36 -04:00
Kinematics.md toolhead: Permit look-ahead between Z moves 2017-09-03 15:46:48 -04:00
MCU_Commands.md gpiocmds: Allow the start value for a pin to differ from the default_value 2017-10-12 11:59:27 -04:00
Overview.md docs: Add a G-Codes.md file with the list of available commands 2018-03-08 14:11:20 -05:00
Pressure_Advance.md docs: Note pressure_advance over 0.20 is unlikely to improve quality 2018-01-08 11:07:26 -05:00
Protocol.md docs: Use only single space at start of new sentence 2017-05-01 11:58:32 -04:00
README.md docs: Improve documentation for those starting in docs/ 2017-04-27 16:05:26 -04:00
Releases.md docs: Update release notes for v0.6.0 release 2018-03-31 14:04:39 -04:00
Todo.md gcode: Add a SET_GCODE_OFFSET command 2018-04-20 20:04:41 -04:00
beaglebone.md docs: Note the use of the virtual_sdcard feature 2018-03-02 11:28:01 -05:00
developer-certificate-of-origin docs: Add a CONTRIBUTING document 2017-12-24 12:33:01 -05:00
issue_template.md docs: Add github issue template 2018-01-31 14:30:05 -05:00

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.