klipper/lib/same54/include/instance/osc32kctrl.h

60 lines
3.3 KiB
C

/**
* \file
*
* \brief Instance description for OSC32KCTRL
*
* Copyright (c) 2019 Microchip Technology Inc.
*
* \asf_license_start
*
* \page License
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the Licence at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* \asf_license_stop
*
*/
#ifndef _SAME54_OSC32KCTRL_INSTANCE_
#define _SAME54_OSC32KCTRL_INSTANCE_
/* ========== Register definition for OSC32KCTRL peripheral ========== */
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
#define REG_OSC32KCTRL_INTENCLR (0x40001400) /**< \brief (OSC32KCTRL) Interrupt Enable Clear */
#define REG_OSC32KCTRL_INTENSET (0x40001404) /**< \brief (OSC32KCTRL) Interrupt Enable Set */
#define REG_OSC32KCTRL_INTFLAG (0x40001408) /**< \brief (OSC32KCTRL) Interrupt Flag Status and Clear */
#define REG_OSC32KCTRL_STATUS (0x4000140C) /**< \brief (OSC32KCTRL) Power and Clocks Status */
#define REG_OSC32KCTRL_RTCCTRL (0x40001410) /**< \brief (OSC32KCTRL) RTC Clock Selection */
#define REG_OSC32KCTRL_XOSC32K (0x40001414) /**< \brief (OSC32KCTRL) 32kHz External Crystal Oscillator (XOSC32K) Control */
#define REG_OSC32KCTRL_CFDCTRL (0x40001416) /**< \brief (OSC32KCTRL) Clock Failure Detector Control */
#define REG_OSC32KCTRL_EVCTRL (0x40001417) /**< \brief (OSC32KCTRL) Event Control */
#define REG_OSC32KCTRL_OSCULP32K (0x4000141C) /**< \brief (OSC32KCTRL) 32kHz Ultra Low Power Internal Oscillator (OSCULP32K) Control */
#else
#define REG_OSC32KCTRL_INTENCLR (*(RwReg *)0x40001400UL) /**< \brief (OSC32KCTRL) Interrupt Enable Clear */
#define REG_OSC32KCTRL_INTENSET (*(RwReg *)0x40001404UL) /**< \brief (OSC32KCTRL) Interrupt Enable Set */
#define REG_OSC32KCTRL_INTFLAG (*(RwReg *)0x40001408UL) /**< \brief (OSC32KCTRL) Interrupt Flag Status and Clear */
#define REG_OSC32KCTRL_STATUS (*(RoReg *)0x4000140CUL) /**< \brief (OSC32KCTRL) Power and Clocks Status */
#define REG_OSC32KCTRL_RTCCTRL (*(RwReg8 *)0x40001410UL) /**< \brief (OSC32KCTRL) RTC Clock Selection */
#define REG_OSC32KCTRL_XOSC32K (*(RwReg16*)0x40001414UL) /**< \brief (OSC32KCTRL) 32kHz External Crystal Oscillator (XOSC32K) Control */
#define REG_OSC32KCTRL_CFDCTRL (*(RwReg8 *)0x40001416UL) /**< \brief (OSC32KCTRL) Clock Failure Detector Control */
#define REG_OSC32KCTRL_EVCTRL (*(RwReg8 *)0x40001417UL) /**< \brief (OSC32KCTRL) Event Control */
#define REG_OSC32KCTRL_OSCULP32K (*(RwReg *)0x4000141CUL) /**< \brief (OSC32KCTRL) 32kHz Ultra Low Power Internal Oscillator (OSCULP32K) Control */
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/* ========== Instance parameters for OSC32KCTRL peripheral ========== */
#define OSC32KCTRL_OSC32K_COARSE_CALIB_MSB 0 // OSC32K coarse calibration size
#endif /* _SAME54_OSC32KCTRL_INSTANCE_ */