klipper/klippy
Florian Heilmann b98e12c19a sx1509: Relax restrictions on SX1509 pins (#836)
This allows SX1509 pins to be used as temperature fans and heater fans. Heaters are still disallowed.

Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2018-10-30 18:08:12 -04:00
..
chelper chelper: Add a quick __main__ to compile c helper (#782) 2018-10-16 12:21:18 -04:00
extras sx1509: Relax restrictions on SX1509 pins (#836) 2018-10-30 18:08:12 -04:00
kinematics delta: Make sure to clear limit_xy2 after a homing move 2018-10-27 11:54:17 -04:00
clocksync.py clocksync: Simplify is_active() check 2018-05-31 18:20:30 -04:00
configfile.py configfile: Strip trailing comments 2018-10-16 11:45:20 -04:00
console.py console: Use reactor register_callback() mechanism 2018-09-02 12:31:36 -04:00
gcode.py gcode: process_batch() should execute commands atomically 2018-10-28 18:39:45 -04:00
heater.py heater: Add new TURN_OFF_HEATERS command 2018-09-18 16:01:07 -04:00
homing.py endstop_phase: Move endstop phase homing code to new "extras" module 2018-10-16 13:09:23 -04:00
klippy.py klippy: No need to return anything from _connect() method 2018-10-18 15:58:52 -04:00
mathutil.py delta_calibrate: Perform coordinate descent in a background process 2018-10-15 19:01:19 -04:00
mcu.py mcu: Add a set_commanded_position() method to MCU_stepper 2018-10-10 14:30:09 -04:00
msgproto.py msgproto: Add support for a get_constant_int() method 2018-05-28 10:43:40 -04:00
parsedump.py build: Request python2 for all directly executed python binaries 2017-06-27 20:26:02 -04:00
pins.py avr: Add support for atmega328p 2018-10-29 11:55:15 -04:00
queuelogger.py klippy: Automatically clear rollover_info on each restart 2018-04-03 13:18:52 -04:00
reactor.py reactor: Add ability to register callbacks 2018-06-30 14:13:47 -04:00
serialhdl.py serialqueue: Limit message transmission to available receive buffer size 2018-05-28 11:12:30 -04:00
stepper.py endstop_phase: Move endstop phase homing code to new "extras" module 2018-10-16 13:09:23 -04:00
toolhead.py idle_timeout: Add printing/ready/idle tracking 2018-10-28 18:39:45 -04:00
util.py util: Fix versioning when gitdir is absent (#809) 2018-10-27 10:44:38 -04:00