klipper

History

Kevin O'Connor efab177645 docs: Note tmc2660 driver_HEND default change from 6 to 3 Signed-off-by: Kevin O'Connor <kevin@koconnor.net>		2019-03-22 20:41:32 -04:00
..
img	docs: Add a Manual_Probe.md document	2019-02-24 00:49:47 -05:00
prints	…
BLTouch.md	…
Bed_Level.md	docs: Add a Manual_Probe.md document	2019-02-24 00:49:47 -05:00
Bootloaders.md	…
CONTRIBUTING.md	…
Code_Overview.md	…
Config_Changes.md	docs: Note tmc2660 driver_HEND default change from 6 to 3	2019-03-22 20:41:32 -04:00
Config_checks.md	…
Contact.md	…
Debugging.md	docs: Update atsam usb transfer benchmarks	2019-03-10 21:59:18 -04:00
Delta_Calibrate.md	…
Endstop_Phase.md	…
FAQ.md	docs: Warn against using the TMC2208 in standalone mode	2019-02-20 16:22:06 -05:00
Features.md	…
G-Codes.md	tmc2130: add SET_TMC_CURRENT and SET_TMC_FIELD commands (#1419 )	2019-03-22 20:37:03 -04:00
Installation.md	docs: Recommend OctoPi v0.16.0	2019-03-11 22:13:04 -04:00
Kinematics.md	…
MCU_Commands.md	…
Manual_Level.md	screws_tilt_adjust: Add new screws_tilt_adjust tool (#1367 )	2019-03-08 11:47:17 -05:00
Overview.md	docs: Add a Manual_Probe.md document	2019-02-24 00:49:47 -05:00
Packaging.md	…
Pressure_Advance.md	…
Probe_Calibrate.md	…
Protocol.md	command: Always pass a string to the DECL_CONSTANT() macro	2019-03-17 19:38:18 -04:00
README.md	…
Releases.md	…
Sensorless_Homing.md	Update sensorless homing documentation to disable second home	2019-03-19 10:55:59 -04:00
Slicers.md	…
TSL1401CL_Filament_Width_Sensor.md	…
beaglebone.md	…
developer-certificate-of-origin	…
issue_template.md	…
stm32f1.md	…

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.