3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
klipper/docs
History
Kevin O'Connor 364c22fe84 probe: Rework the PROBE_ACCURACY command parameters 
Don't default to a Z location of 10, as that could cause damage if the
probe's z_offset is greater than 10.  Instead, use the "retract
distance" method that is used for normal multi-sample probing.

Update the PROBE_ACCURACY command parameter names to use the same
parameter names as the PROBE command.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 		2019-07-10 15:21:09 -04:00
..
_layouts docs: Fix markdown table layout in html rendering 2019-04-18 22:56:56 -04:00
img skew_correction: add documentation 2019-06-26 20:16:35 -04:00
prints
…
BLTouch.md docs: Improve bltouch v3 documentation 2019-05-26 11:09:32 -04:00
Bed_Level.md docs: Minor wording change to Bed_Level.md 2019-05-23 19:31:44 -04:00
Benchmarks.md docs: STM32F0 benchmarks (#1462) 2019-03-29 09:38:54 -04:00
Bootloaders.md docs: Add information on using OpenOCD to Bootloaders.md 2019-07-09 13:37:17 -04:00
CNAME docs: Fixup github pages 2019-04-14 22:41:23 -04:00
CONTRIBUTING.md
…
Code_Overview.md
…
Command_Templates.md docs: Add documentation for [delayed_gcode] 2019-07-01 11:09:30 -04:00
Config_Changes.md probe: Rework the PROBE_ACCURACY command parameters 2019-07-10 15:21:09 -04:00
Config_checks.md
…
Contact.md
…
Debugging.md docs: Add information on running the regression suite locally 2019-06-23 17:59:23 -04:00
Delta_Calibrate.md docs: Update Delta_Calibrate.md with probe location bias info 2019-06-06 10:08:58 -04:00
Endstop_Phase.md
…
FAQ.md docs: Fix numbering in FAQ 2019-05-08 16:48:14 -04:00
Features.md docs: Note tmc2209 and tmc5160 support in Features.md 2019-06-23 12:28:39 -04:00
G-Codes.md probe: Rework the PROBE_ACCURACY command parameters 2019-07-10 15:21:09 -04:00
Installation.md docs: Recommend OctoPrint 1.3.11 or later 2019-05-20 23:01:04 -04:00
Kinematics.md
…
MCU_Commands.md docs: Minor wording change in MCU_Commands.md 2019-04-01 22:04:56 -04:00
Manual_Level.md docs: Try to be more clear that the "paper test" steps need to be run 2019-05-24 22:44:00 -04:00
Overview.md docs: Add skew_correction.md to Overview.md 2019-06-27 09:50:17 -04:00
Packaging.md
…
Pressure_Advance.md
…
Probe_Calibrate.md docs: Update Probe_Calibrate.md with information on common probe errors 2019-06-06 10:08:58 -04:00
Protocol.md docs: Update Protocol.md to use enumerations for pins 2019-07-09 14:17:28 -04:00
README.md
…
Releases.md
…
Sensorless_Homing.md Update sensorless homing documentation to disable second home 2019-03-19 10:55:59 -04:00
Slicers.md docs: Warn against using "PreloadVE" on KISSlicer 2019-06-23 12:18:24 -04:00
TSL1401CL_Filament_Width_Sensor.md
…
_config.yml docs: Fix inclusion of CONTRIBUTING.md in the automatic html generation 2019-04-18 23:10:32 -04:00
beaglebone.md docs: Avoid using .. in markdown links 2019-04-14 21:12:21 -04:00
developer-certificate-of-origin
…
issue_template.md
…
skew_correction.md docs: Update for latest changs to skew_correction 2019-06-29 10:58:46 -04:00
stm32f0_CAN.md stm32f0: Various fixes according to comment: (#1453) 2019-03-28 10:21:51 -04:00
stm32f1.md
…

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.