klipper/docs
Kevin O'Connor 31730fa031 docs: Minor wording change to Endstop_Phase.md
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-13 18:44:33 -05:00
..
img docs: Add Delta_Calibrate.md guide with "enhanced delta calibration" 2018-09-25 13:48:46 -04:00
prints delta_calibrate: Initial support for enhanced delta calibration 2018-09-25 13:48:46 -04:00
Bootloaders.md docs: Fix typo in Bootloaders.md 2018-11-13 14:41:51 -05:00
CONTRIBUTING.md docs: Add a CONTRIBUTING document 2017-12-24 12:33:01 -05:00
Code_Overview.md docs: Add a section with micro-controller porting tips to Code_Overview.md 2018-07-11 14:40:39 -04:00
Config_checks.md docs: Add a Slicers.md document 2018-10-28 10:47:32 -04:00
Contact.md docs: Expand on why it is important to provide the log in Contact.md 2018-07-08 20:30:35 -04:00
Debugging.md docs: Fix SAM4E8E benchmark test revision 2018-10-22 11:21:43 -04:00
Delta_Calibrate.md delta_calibrate: Do not automatically run G28 on DELTA_CALIBRATE 2018-10-22 11:26:01 -04:00
Endstop_Phase.md docs: Minor wording change to Endstop_Phase.md 2018-11-13 18:44:33 -05:00
FAQ.md docs: Fix link in FAQ document 2018-11-13 14:40:35 -05:00
Features.md docs: Update SAM4E8E benchmarks 2018-10-22 11:18:55 -04:00
G-Codes.md docs: Clarify M109/M190 in G-Code documentation 2018-10-28 14:22:30 -04:00
Installation.md docs: Be more clear that a baud of 250000 is recommended 2018-11-13 14:06:27 -05:00
Kinematics.md docs: Minor change to wording of junction speeds 2018-08-03 15:48:07 -04:00
MCU_Commands.md basecmd: Rename get_status to get_clock 2018-05-29 10:57:29 -04:00
Overview.md docs: Add a Slicers.md document 2018-10-28 10:47:32 -04:00
Packaging.md util: Fix versioning when gitdir is absent (#809) 2018-10-27 10:44:38 -04:00
Pressure_Advance.md docs: Update pressure advance doc to note it only impacts the extruder 2018-10-25 19:09:47 -04:00
Protocol.md docs: Replace get_status example with get_clock in Protocol.md 2018-10-20 11:53:32 -04:00
README.md docs: Improve documentation for those starting in docs/ 2017-04-27 16:05:26 -04:00
Releases.md docs: Update release notes for v0.6.0 release 2018-03-31 14:04:39 -04:00
Slicers.md docs: Add a Slicers.md document 2018-10-28 10:47:32 -04:00
beaglebone.md pru: Disable ADC reading directly from the PRU 2018-06-27 12:10:25 -04:00
developer-certificate-of-origin docs: Add a CONTRIBUTING document 2017-12-24 12:33:01 -05:00
issue_template.md docs: Add github issue template 2018-01-31 14:30:05 -05:00
stm32f1.md docs: Update stm32f1.md - usb is now supported. 2018-10-22 13:22:58 -04:00

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.