3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
Клиппер
2,533 Commits 1 Branch 0 Tags 27 MiB
C 96.7%
Python 2.8%
C++ 0.3%
Go to file
Kevin O'Connor 2ecc8d8f62 stm32: stm32f4 usb boot check only needed when CONFIG_USBSERIAL 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 		2019-10-26 16:56:33 -04:00
config config: The duet2 maestro uses a 2200 ohm pullup resistor 2019-10-24 13:07:07 -04:00
docs docs: Update benchmarks for stm32f0 2019-10-23 21:45:07 -04:00
klippy tmc_uart: Don't try to configure analog pins to -1 value 2019-10-26 11:33:30 -04:00
lib lib: Add a copy of stm32f0 cmsis files from v1.10.0 2019-10-23 21:16:35 -04:00
scripts stm32f4: Add support for flashing over USB 2019-10-26 13:24:59 -04:00
src stm32: stm32f4 usb boot check only needed when CONFIG_USBSERIAL 2019-10-26 16:56:33 -04:00
test stm32f0: Rename internal build symbol from MACH_STM32F0 to MACH_STM32F0_HAL 2019-10-23 21:16:35 -04:00
.gitignore util: Fix versioning when gitdir is absent (#809) 2018-10-27 10:44:38 -04:00
.travis.yml test: Update .travis.yml to list apt packages one per line 2018-08-17 09:47:57 -04:00
COPYING Initial commit of source code. 2016-05-25 11:37:40 -04:00
Makefile Makefile: Use "tr -s" in compile_time_request.txt generation 2019-08-22 11:40:02 -04:00
README.md docs: Update main README file to point to website 2019-04-20 13:43:35 -04:00

README.md

Welcome to the Klipper project!

Klipper

https://www.klipper3d.org/

Klipper is a 3d-Printer firmware. It combines the power of a general purpose computer with one or more micro-controllers. See the features document for more information on why you should use Klipper.

To begin using Klipper start by installing it.

Klipper is Free Software. See the license or read the documentation.