klipper

History

Kevin O'Connor 2c4ca88887 docs: Update documentation to note use of /dev/serial/by-path/ When using multiple micro-controllers it may be necessary to use an id from /dev/serial/by-path/ instead of /dev/serial/by-id/. Also, emphasize that in config/example-multi-mcu.cfg. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>		2018-06-01 17:22:03 -04:00
..
img	…
prints	…
CONTRIBUTING.md	…
Code_Overview.md	…
Config_checks.md	…
Contact.md	…
Debugging.md	…
FAQ.md	docs: Update documentation to note use of /dev/serial/by-path/	2018-06-01 17:22:03 -04:00
Features.md	docs: Add LPC1768 benchmarks to Features.md document	2018-05-25 11:52:13 -04:00
G-Codes.md	stepper: Add STEPPER_BUZZ command	2018-05-24 09:49:17 -04:00
Installation.md	…
Kinematics.md	…
MCU_Commands.md	basecmd: Rename get_status to get_clock	2018-05-29 10:57:29 -04:00
Overview.md	…
Pressure_Advance.md	…
Protocol.md	…
README.md	…
Releases.md	…
Todo.md	docs: Remove lpc176x item from Todo	2018-05-25 13:56:54 -04:00
beaglebone.md	…
developer-certificate-of-origin	…
issue_template.md	…

Welcome to the Klipper documentation. The overview document is a good starting point.