932 lines
36 KiB
C
932 lines
36 KiB
C
/**
|
|
******************************************************************************
|
|
* @file stm32f1xx_ll_fsmc.c
|
|
* @author MCD Application Team
|
|
* @version V1.1.1
|
|
* @date 12-May-2017
|
|
* @brief FSMC Low Layer HAL module driver.
|
|
*
|
|
* This file provides firmware functions to manage the following
|
|
* functionalities of the Flexible Static Memory Controller (FSMC) peripheral memories:
|
|
* + Initialization/de-initialization functions
|
|
* + Peripheral Control functions
|
|
* + Peripheral State functions
|
|
*
|
|
@verbatim
|
|
=============================================================================
|
|
##### FSMC peripheral features #####
|
|
=============================================================================
|
|
[..] The Flexible static memory controller (FSMC) includes following memory controllers:
|
|
(+) The NOR/PSRAM memory controller
|
|
(+) The PC Card memory controller
|
|
(+) The NAND memory controller
|
|
(PC Card and NAND controllers available only on STM32F101xE, STM32F103xE, STM32F101xG and STM32F103xG)
|
|
|
|
[..] The FSMC functional block makes the interface with synchronous and asynchronous static
|
|
memories and 16-bit PC memory cards. Its main purposes are:
|
|
(+) to translate AHB transactions into the appropriate external device protocol.
|
|
(+) to meet the access time requirements of the external memory devices.
|
|
|
|
[..] All external memories share the addresses, data and control signals with the controller.
|
|
Each external device is accessed by means of a unique Chip Select. The FSMC performs
|
|
only one access at a time to an external device.
|
|
The main features of the FSMC controller are the following:
|
|
(+) Interface with static-memory mapped devices including:
|
|
(++) Static random access memory (SRAM).
|
|
(++) NOR Flash memory.
|
|
(++) PSRAM (4 memory banks).
|
|
(++) 16-bit PC Card compatible devices.
|
|
(++) Two banks of NAND Flash memory with ECC hardware to check up to 8 Kbytes of
|
|
data.
|
|
(+) Independent Chip Select control for each memory bank.
|
|
(+) Independent configuration for each memory bank.
|
|
|
|
@endverbatim
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32f1xx_hal.h"
|
|
|
|
/** @addtogroup STM32F1xx_HAL_Driver
|
|
* @{
|
|
*/
|
|
|
|
#if defined(FSMC_BANK1)
|
|
|
|
#if defined(HAL_SRAM_MODULE_ENABLED) || defined(HAL_NOR_MODULE_ENABLED) || defined(HAL_PCCARD_MODULE_ENABLED) || defined(HAL_NAND_MODULE_ENABLED)
|
|
|
|
/** @defgroup FSMC_LL FSMC Low Layer
|
|
* @brief FSMC driver modules
|
|
* @{
|
|
*/
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* Private macro -------------------------------------------------------------*/
|
|
/* Private variables ---------------------------------------------------------*/
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
/* Exported functions --------------------------------------------------------*/
|
|
|
|
/** @defgroup FSMC_LL_Exported_Functions FSMC Low Layer Exported Functions
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup FSMC_NORSRAM FSMC NORSRAM Controller functions
|
|
* @brief NORSRAM Controller functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### How to use NORSRAM device driver #####
|
|
==============================================================================
|
|
|
|
[..]
|
|
This driver contains a set of APIs to interface with the FSMC NORSRAM banks in order
|
|
to run the NORSRAM external devices.
|
|
|
|
(+) FSMC NORSRAM bank reset using the function FSMC_NORSRAM_DeInit()
|
|
(+) FSMC NORSRAM bank control configuration using the function FSMC_NORSRAM_Init()
|
|
(+) FSMC NORSRAM bank timing configuration using the function FSMC_NORSRAM_Timing_Init()
|
|
(+) FSMC NORSRAM bank extended timing configuration using the function
|
|
FSMC_NORSRAM_Extended_Timing_Init()
|
|
(+) FSMC NORSRAM bank enable/disable write operation using the functions
|
|
FSMC_NORSRAM_WriteOperation_Enable()/FSMC_NORSRAM_WriteOperation_Disable()
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup FSMC_LL_NORSRAM_Private_Functions_Group1
|
|
* @brief Initialization and Configuration functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### Initialization and de_initialization functions #####
|
|
==============================================================================
|
|
[..]
|
|
This section provides functions allowing to:
|
|
(+) Initialize and configure the FSMC NORSRAM interface
|
|
(+) De-initialize the FSMC NORSRAM interface
|
|
(+) Configure the FSMC clock and associated GPIOs
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Initialize the FSMC_NORSRAM device according to the specified
|
|
* control parameters in the FSMC_NORSRAM_InitTypeDef
|
|
* @param Device: Pointer to NORSRAM device instance
|
|
* @param Init: Pointer to NORSRAM Initialization structure
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_InitTypeDef *Init)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
|
|
assert_param(IS_FSMC_NORSRAM_BANK(Init->NSBank));
|
|
assert_param(IS_FSMC_MUX(Init->DataAddressMux));
|
|
assert_param(IS_FSMC_MEMORY(Init->MemoryType));
|
|
assert_param(IS_FSMC_NORSRAM_MEMORY_WIDTH(Init->MemoryDataWidth));
|
|
assert_param(IS_FSMC_BURSTMODE(Init->BurstAccessMode));
|
|
assert_param(IS_FSMC_WAIT_POLARITY(Init->WaitSignalPolarity));
|
|
assert_param(IS_FSMC_WRAP_MODE(Init->WrapMode));
|
|
assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(Init->WaitSignalActive));
|
|
assert_param(IS_FSMC_WRITE_OPERATION(Init->WriteOperation));
|
|
assert_param(IS_FSMC_WAITE_SIGNAL(Init->WaitSignal));
|
|
assert_param(IS_FSMC_EXTENDED_MODE(Init->ExtendedMode));
|
|
assert_param(IS_FSMC_ASYNWAIT(Init->AsynchronousWait));
|
|
assert_param(IS_FSMC_WRITE_BURST(Init->WriteBurst));
|
|
|
|
/* Disable NORSRAM Device */
|
|
__FSMC_NORSRAM_DISABLE(Device, Init->NSBank);
|
|
|
|
/* Set NORSRAM device control parameters */
|
|
if (Init->MemoryType == FSMC_MEMORY_TYPE_NOR)
|
|
{
|
|
MODIFY_REG(Device->BTCR[Init->NSBank], BCR_CLEAR_MASK, (uint32_t)(FSMC_NORSRAM_FLASH_ACCESS_ENABLE
|
|
| Init->DataAddressMux
|
|
| Init->MemoryType
|
|
| Init->MemoryDataWidth
|
|
| Init->BurstAccessMode
|
|
| Init->WaitSignalPolarity
|
|
| Init->WrapMode
|
|
| Init->WaitSignalActive
|
|
| Init->WriteOperation
|
|
| Init->WaitSignal
|
|
| Init->ExtendedMode
|
|
| Init->AsynchronousWait
|
|
| Init->WriteBurst
|
|
)
|
|
);
|
|
}
|
|
else
|
|
{
|
|
MODIFY_REG(Device->BTCR[Init->NSBank], BCR_CLEAR_MASK, (uint32_t)(FSMC_NORSRAM_FLASH_ACCESS_DISABLE
|
|
| Init->DataAddressMux
|
|
| Init->MemoryType
|
|
| Init->MemoryDataWidth
|
|
| Init->BurstAccessMode
|
|
| Init->WaitSignalPolarity
|
|
| Init->WrapMode
|
|
| Init->WaitSignalActive
|
|
| Init->WriteOperation
|
|
| Init->WaitSignal
|
|
| Init->ExtendedMode
|
|
| Init->AsynchronousWait
|
|
| Init->WriteBurst
|
|
)
|
|
);
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief DeInitialize the FSMC_NORSRAM peripheral
|
|
* @param Device: Pointer to NORSRAM device instance
|
|
* @param ExDevice: Pointer to NORSRAM extended mode device instance
|
|
* @param Bank: NORSRAM bank number
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
|
|
assert_param(IS_FSMC_NORSRAM_EXTENDED_DEVICE(ExDevice));
|
|
assert_param(IS_FSMC_NORSRAM_BANK(Bank));
|
|
|
|
/* Disable the FSMC_NORSRAM device */
|
|
__FSMC_NORSRAM_DISABLE(Device, Bank);
|
|
|
|
/* De-initialize the FSMC_NORSRAM device */
|
|
/* FSMC_NORSRAM_BANK1 */
|
|
if(Bank == FSMC_NORSRAM_BANK1)
|
|
{
|
|
Device->BTCR[Bank] = 0x000030DBU;
|
|
}
|
|
/* FSMC_NORSRAM_BANK2, FSMC_NORSRAM_BANK3 or FSMC_NORSRAM_BANK4 */
|
|
else
|
|
{
|
|
Device->BTCR[Bank] = 0x000030D2U;
|
|
}
|
|
|
|
Device->BTCR[Bank + 1U] = 0x0FFFFFFFU;
|
|
ExDevice->BWTR[Bank] = 0x0FFFFFFFU;
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief Initialize the FSMC_NORSRAM Timing according to the specified
|
|
* parameters in the FSMC_NORSRAM_TimingTypeDef
|
|
* @param Device: Pointer to NORSRAM device instance
|
|
* @param Timing: Pointer to NORSRAM Timing structure
|
|
* @param Bank: NORSRAM bank number
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
|
|
assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
|
|
assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
|
|
assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime));
|
|
assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
|
|
assert_param(IS_FSMC_CLK_DIV(Timing->CLKDivision));
|
|
assert_param(IS_FSMC_DATA_LATENCY(Timing->DataLatency));
|
|
assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode));
|
|
assert_param(IS_FSMC_NORSRAM_BANK(Bank));
|
|
|
|
/* Set FSMC_NORSRAM device timing parameters */
|
|
MODIFY_REG(Device->BTCR[Bank + 1U], \
|
|
BTR_CLEAR_MASK, \
|
|
(uint32_t)(Timing->AddressSetupTime | \
|
|
((Timing->AddressHoldTime) << FSMC_BTRx_ADDHLD_Pos) | \
|
|
((Timing->DataSetupTime) << FSMC_BTRx_DATAST_Pos) | \
|
|
((Timing->BusTurnAroundDuration) << FSMC_BTRx_BUSTURN_Pos) | \
|
|
(((Timing->CLKDivision) - 1U) << FSMC_BTRx_CLKDIV_Pos) | \
|
|
(((Timing->DataLatency) - 2U) << FSMC_BTRx_DATLAT_Pos) | \
|
|
(Timing->AccessMode)));
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Initialize the FSMC_NORSRAM Extended mode Timing according to the specified
|
|
* parameters in the FSMC_NORSRAM_TimingTypeDef
|
|
* @param Device: Pointer to NORSRAM device instance
|
|
* @param Timing: Pointer to NORSRAM Timing structure
|
|
* @param Bank: NORSRAM bank number
|
|
* @param ExtendedMode FSMC Extended Mode
|
|
* This parameter can be one of the following values:
|
|
* @arg FSMC_EXTENDED_MODE_DISABLE
|
|
* @arg FSMC_EXTENDED_MODE_ENABLE
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_FSMC_EXTENDED_MODE(ExtendedMode));
|
|
|
|
/* Set NORSRAM device timing register for write configuration, if extended mode is used */
|
|
if(ExtendedMode == FSMC_EXTENDED_MODE_ENABLE)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_FSMC_NORSRAM_EXTENDED_DEVICE(Device));
|
|
assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
|
|
assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
|
|
assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime));
|
|
#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG)
|
|
assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
|
|
#else
|
|
assert_param(IS_FSMC_CLK_DIV(Timing->CLKDivision));
|
|
assert_param(IS_FSMC_DATA_LATENCY(Timing->DataLatency));
|
|
#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG */
|
|
assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode));
|
|
assert_param(IS_FSMC_NORSRAM_BANK(Bank));
|
|
|
|
/* Set NORSRAM device timing register for write configuration, if extended mode is used */
|
|
#if defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG)
|
|
MODIFY_REG(Device->BWTR[Bank], \
|
|
BWTR_CLEAR_MASK, \
|
|
(uint32_t)(Timing->AddressSetupTime | \
|
|
((Timing->AddressHoldTime) << FSMC_BWTRx_ADDHLD_Pos) | \
|
|
((Timing->DataSetupTime) << FSMC_BWTRx_DATAST_Pos) | \
|
|
Timing->AccessMode | \
|
|
((Timing->BusTurnAroundDuration) << FSMC_BWTRx_BUSTURN_Pos)));
|
|
#else
|
|
MODIFY_REG(Device->BWTR[Bank], \
|
|
BWTR_CLEAR_MASK, \
|
|
(uint32_t)(Timing->AddressSetupTime | \
|
|
((Timing->AddressHoldTime) << FSMC_BWTRx_ADDHLD_Pos) | \
|
|
((Timing->DataSetupTime) << FSMC_BWTRx_DATAST_Pos) | \
|
|
Timing->AccessMode | \
|
|
(((Timing->CLKDivision) - 1U) << FSMC_BTRx_CLKDIV_Pos) | \
|
|
(((Timing->DataLatency) - 2U) << FSMC_BWTRx_DATLAT_Pos)));
|
|
#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG */
|
|
}
|
|
else
|
|
{
|
|
Device->BWTR[Bank] = 0x0FFFFFFFU;
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FSMC_NORSRAM_Group2 Control functions
|
|
* @brief management functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### FSMC_NORSRAM Control functions #####
|
|
==============================================================================
|
|
[..]
|
|
This subsection provides a set of functions allowing to control dynamically
|
|
the FSMC NORSRAM interface.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enables dynamically FSMC_NORSRAM write operation.
|
|
* @param Device: Pointer to NORSRAM device instance
|
|
* @param Bank: NORSRAM bank number
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Enable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
|
|
assert_param(IS_FSMC_NORSRAM_BANK(Bank));
|
|
|
|
/* Enable write operation */
|
|
SET_BIT(Device->BTCR[Bank], FSMC_WRITE_OPERATION_ENABLE);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Disables dynamically FSMC_NORSRAM write operation.
|
|
* @param Device: Pointer to NORSRAM device instance
|
|
* @param Bank: NORSRAM bank number
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
|
|
assert_param(IS_FSMC_NORSRAM_BANK(Bank));
|
|
|
|
/* Disable write operation */
|
|
CLEAR_BIT(Device->BTCR[Bank], FSMC_WRITE_OPERATION_ENABLE);
|
|
|
|
return HAL_OK;
|
|
}
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#if (defined (STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG))
|
|
/** @defgroup FSMC_NAND FSMC NAND Controller functions
|
|
* @brief NAND Controller functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### How to use NAND device driver #####
|
|
==============================================================================
|
|
[..]
|
|
This driver contains a set of APIs to interface with the FSMC NAND banks in order
|
|
to run the NAND external devices.
|
|
|
|
(+) FSMC NAND bank reset using the function FSMC_NAND_DeInit()
|
|
(+) FSMC NAND bank control configuration using the function FSMC_NAND_Init()
|
|
(+) FSMC NAND bank common space timing configuration using the function
|
|
FSMC_NAND_CommonSpace_Timing_Init()
|
|
(+) FSMC NAND bank attribute space timing configuration using the function
|
|
FSMC_NAND_AttributeSpace_Timing_Init()
|
|
(+) FSMC NAND bank enable/disable ECC correction feature using the functions
|
|
FSMC_NAND_ECC_Enable()/FSMC_NAND_ECC_Disable()
|
|
(+) FSMC NAND bank get ECC correction code using the function FSMC_NAND_GetECC()
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup FSMC_NAND_Exported_Functions_Group1 Initialization and de-initialization functions
|
|
* @brief Initialization and Configuration functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### Initialization and de_initialization functions #####
|
|
==============================================================================
|
|
[..]
|
|
This section provides functions allowing to:
|
|
(+) Initialize and configure the FSMC NAND interface
|
|
(+) De-initialize the FSMC NAND interface
|
|
(+) Configure the FSMC clock and associated GPIOs
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Initializes the FSMC_NAND device according to the specified
|
|
* control parameters in the FSMC_NAND_HandleTypeDef
|
|
* @param Device: Pointer to NAND device instance
|
|
* @param Init: Pointer to NAND Initialization structure
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef FSMC_NAND_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_InitTypeDef *Init)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_FSMC_NAND_DEVICE(Device));
|
|
assert_param(IS_FSMC_NAND_BANK(Init->NandBank));
|
|
assert_param(IS_FSMC_WAIT_FEATURE(Init->Waitfeature));
|
|
assert_param(IS_FSMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth));
|
|
assert_param(IS_FSMC_ECC_STATE(Init->EccComputation));
|
|
assert_param(IS_FSMC_ECCPAGE_SIZE(Init->ECCPageSize));
|
|
assert_param(IS_FSMC_TCLR_TIME(Init->TCLRSetupTime));
|
|
assert_param(IS_FSMC_TAR_TIME(Init->TARSetupTime));
|
|
|
|
/* Set NAND device control parameters */
|
|
if (Init->NandBank == FSMC_NAND_BANK2)
|
|
{
|
|
/* NAND bank 2 registers configuration */
|
|
MODIFY_REG(Device->PCR2, PCR_CLEAR_MASK, (Init->Waitfeature |
|
|
FSMC_PCR_MEMORY_TYPE_NAND |
|
|
Init->MemoryDataWidth |
|
|
Init->EccComputation |
|
|
Init->ECCPageSize |
|
|
((Init->TCLRSetupTime) << FSMC_PCRx_TCLR_Pos) |
|
|
((Init->TARSetupTime) << FSMC_PCRx_TAR_Pos)));
|
|
}
|
|
else
|
|
{
|
|
/* NAND bank 3 registers configuration */
|
|
MODIFY_REG(Device->PCR3, PCR_CLEAR_MASK, (Init->Waitfeature |
|
|
FSMC_PCR_MEMORY_TYPE_NAND |
|
|
Init->MemoryDataWidth |
|
|
Init->EccComputation |
|
|
Init->ECCPageSize |
|
|
((Init->TCLRSetupTime) << FSMC_PCRx_TCLR_Pos) |
|
|
((Init->TARSetupTime) << FSMC_PCRx_TAR_Pos)));
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Initializes the FSMC_NAND Common space Timing according to the specified
|
|
* parameters in the FSMC_NAND_PCC_TimingTypeDef
|
|
* @param Device: Pointer to NAND device instance
|
|
* @param Timing: Pointer to NAND timing structure
|
|
* @param Bank: NAND bank number
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef FSMC_NAND_CommonSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_FSMC_NAND_DEVICE(Device));
|
|
assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
|
|
assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
|
|
assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
|
|
assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
|
|
assert_param(IS_FSMC_NAND_BANK(Bank));
|
|
|
|
/* Set FMC_NAND device timing parameters */
|
|
if(Bank == FSMC_NAND_BANK2)
|
|
{
|
|
/* NAND bank 2 registers configuration */
|
|
MODIFY_REG(Device->PMEM2, PMEM_CLEAR_MASK, (Timing->SetupTime | \
|
|
((Timing->WaitSetupTime) << FSMC_PMEMx_MEMWAITx_Pos) | \
|
|
((Timing->HoldSetupTime) << FSMC_PMEMx_MEMHOLDx_Pos) | \
|
|
((Timing->HiZSetupTime) << FSMC_PMEMx_MEMHIZx_Pos)));
|
|
}
|
|
else
|
|
{
|
|
/* NAND bank 3 registers configuration */
|
|
MODIFY_REG(Device->PMEM3, PMEM_CLEAR_MASK, (Timing->SetupTime | \
|
|
((Timing->WaitSetupTime) << FSMC_PMEMx_MEMWAITx_Pos) | \
|
|
((Timing->HoldSetupTime) << FSMC_PMEMx_MEMHOLDx_Pos) | \
|
|
((Timing->HiZSetupTime) << FSMC_PMEMx_MEMHIZx_Pos)));
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Initializes the FSMC_NAND Attribute space Timing according to the specified
|
|
* parameters in the FSMC_NAND_PCC_TimingTypeDef
|
|
* @param Device: Pointer to NAND device instance
|
|
* @param Timing: Pointer to NAND timing structure
|
|
* @param Bank: NAND bank number
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef FSMC_NAND_AttributeSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_FSMC_NAND_DEVICE(Device));
|
|
assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
|
|
assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
|
|
assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
|
|
assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
|
|
assert_param(IS_FSMC_NAND_BANK(Bank));
|
|
|
|
/* Set FMC_NAND device timing parameters */
|
|
if(Bank == FSMC_NAND_BANK2)
|
|
{
|
|
/* NAND bank 2 registers configuration */
|
|
MODIFY_REG(Device->PATT2, PATT_CLEAR_MASK, (Timing->SetupTime | \
|
|
((Timing->WaitSetupTime) << FSMC_PATTx_ATTWAITx_Pos) | \
|
|
((Timing->HoldSetupTime) << FSMC_PATTx_ATTHOLDx_Pos) | \
|
|
((Timing->HiZSetupTime) << FSMC_PATTx_ATTHIZx_Pos)));
|
|
}
|
|
else
|
|
{
|
|
/* NAND bank 3 registers configuration */
|
|
MODIFY_REG(Device->PATT3, PATT_CLEAR_MASK, (Timing->SetupTime | \
|
|
((Timing->WaitSetupTime) << FSMC_PATTx_ATTWAITx_Pos) | \
|
|
((Timing->HoldSetupTime) << FSMC_PATTx_ATTHOLDx_Pos) | \
|
|
((Timing->HiZSetupTime) << FSMC_PATTx_ATTHIZx_Pos)));
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
|
|
/**
|
|
* @brief DeInitializes the FSMC_NAND device
|
|
* @param Device: Pointer to NAND device instance
|
|
* @param Bank: NAND bank number
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef FSMC_NAND_DeInit(FSMC_NAND_TypeDef *Device, uint32_t Bank)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_FSMC_NAND_DEVICE(Device));
|
|
assert_param(IS_FSMC_NAND_BANK(Bank));
|
|
|
|
/* Disable the NAND Bank */
|
|
__FSMC_NAND_DISABLE(Device, Bank);
|
|
|
|
/* De-initialize the NAND Bank */
|
|
if(Bank == FSMC_NAND_BANK2)
|
|
{
|
|
/* Set the FSMC_NAND_BANK2 registers to their reset values */
|
|
WRITE_REG(Device->PCR2, 0x00000018U);
|
|
WRITE_REG(Device->SR2, 0x00000040U);
|
|
WRITE_REG(Device->PMEM2, 0xFCFCFCFCU);
|
|
WRITE_REG(Device->PATT2, 0xFCFCFCFCU);
|
|
}
|
|
/* FSMC_Bank3_NAND */
|
|
else
|
|
{
|
|
/* Set the FSMC_NAND_BANK3 registers to their reset values */
|
|
WRITE_REG(Device->PCR3, 0x00000018U);
|
|
WRITE_REG(Device->SR3, 0x00000040U);
|
|
WRITE_REG(Device->PMEM3, 0xFCFCFCFCU);
|
|
WRITE_REG(Device->PATT3, 0xFCFCFCFCU);
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
|
|
/** @defgroup FSMC_NAND_Exported_Functions_Group2 Peripheral Control functions
|
|
* @brief management functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### FSMC_NAND Control functions #####
|
|
==============================================================================
|
|
[..]
|
|
This subsection provides a set of functions allowing to control dynamically
|
|
the FSMC NAND interface.
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Enables dynamically FSMC_NAND ECC feature.
|
|
* @param Device: Pointer to NAND device instance
|
|
* @param Bank: NAND bank number
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef FSMC_NAND_ECC_Enable(FSMC_NAND_TypeDef *Device, uint32_t Bank)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_FSMC_NAND_DEVICE(Device));
|
|
assert_param(IS_FSMC_NAND_BANK(Bank));
|
|
|
|
/* Enable ECC feature */
|
|
if(Bank == FSMC_NAND_BANK2)
|
|
{
|
|
SET_BIT(Device->PCR2, FSMC_PCRx_ECCEN);
|
|
}
|
|
else
|
|
{
|
|
SET_BIT(Device->PCR3, FSMC_PCRx_ECCEN);
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Disables dynamically FSMC_NAND ECC feature.
|
|
* @param Device: Pointer to NAND device instance
|
|
* @param Bank: NAND bank number
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef FSMC_NAND_ECC_Disable(FSMC_NAND_TypeDef *Device, uint32_t Bank)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_FSMC_NAND_DEVICE(Device));
|
|
assert_param(IS_FSMC_NAND_BANK(Bank));
|
|
|
|
/* Disable ECC feature */
|
|
if(Bank == FSMC_NAND_BANK2)
|
|
{
|
|
CLEAR_BIT(Device->PCR2, FSMC_PCRx_ECCEN);
|
|
}
|
|
else
|
|
{
|
|
CLEAR_BIT(Device->PCR3, FSMC_PCRx_ECCEN);
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Disables dynamically FSMC_NAND ECC feature.
|
|
* @param Device: Pointer to NAND device instance
|
|
* @param ECCval: Pointer to ECC value
|
|
* @param Bank: NAND bank number
|
|
* @param Timeout: Timeout wait value
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef FSMC_NAND_GetECC(FSMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout)
|
|
{
|
|
uint32_t tickstart = 0U;
|
|
|
|
/* Check the parameters */
|
|
assert_param(IS_FSMC_NAND_DEVICE(Device));
|
|
assert_param(IS_FSMC_NAND_BANK(Bank));
|
|
|
|
/* Get tick */
|
|
tickstart = HAL_GetTick();
|
|
|
|
/* Wait until FIFO is empty */
|
|
while(__FSMC_NAND_GET_FLAG(Device, Bank, FSMC_FLAG_FEMPT) == RESET)
|
|
{
|
|
/* Check for the Timeout */
|
|
if(Timeout != HAL_MAX_DELAY)
|
|
{
|
|
if((Timeout == 0U)||((HAL_GetTick() - tickstart ) > Timeout))
|
|
{
|
|
return HAL_TIMEOUT;
|
|
}
|
|
}
|
|
}
|
|
|
|
if(Bank == FSMC_NAND_BANK2)
|
|
{
|
|
/* Get the ECCR2 register value */
|
|
*ECCval = (uint32_t)Device->ECCR2;
|
|
}
|
|
else
|
|
{
|
|
/* Get the ECCR3 register value */
|
|
*ECCval = (uint32_t)Device->ECCR3;
|
|
}
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @defgroup FSMC_PCCARD FSMC PCCARD Controller functions
|
|
* @brief PCCARD Controller functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### How to use PCCARD device driver #####
|
|
==============================================================================
|
|
[..]
|
|
This driver contains a set of APIs to interface with the FSMC PCCARD bank in order
|
|
to run the PCCARD/compact flash external devices.
|
|
|
|
(+) FSMC PCCARD bank reset using the function FSMC_PCCARD_DeInit()
|
|
(+) FSMC PCCARD bank control configuration using the function FSMC_PCCARD_Init()
|
|
(+) FSMC PCCARD bank common space timing configuration using the function
|
|
FSMC_PCCARD_CommonSpace_Timing_Init()
|
|
(+) FSMC PCCARD bank attribute space timing configuration using the function
|
|
FSMC_PCCARD_AttributeSpace_Timing_Init()
|
|
(+) FSMC PCCARD bank IO space timing configuration using the function
|
|
FSMC_PCCARD_IOSpace_Timing_Init()
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/** @defgroup FSMC_PCCARD_Exported_Functions_Group1 Initialization and de-initialization functions
|
|
* @brief Initialization and Configuration functions
|
|
*
|
|
@verbatim
|
|
==============================================================================
|
|
##### Initialization and de_initialization functions #####
|
|
==============================================================================
|
|
[..]
|
|
This section provides functions allowing to:
|
|
(+) Initialize and configure the FSMC PCCARD interface
|
|
(+) De-initialize the FSMC PCCARD interface
|
|
(+) Configure the FSMC clock and associated GPIOs
|
|
|
|
@endverbatim
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Initializes the FSMC_PCCARD device according to the specified
|
|
* control parameters in the FSMC_PCCARD_HandleTypeDef
|
|
* @param Device: Pointer to PCCARD device instance
|
|
* @param Init: Pointer to PCCARD Initialization structure
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef FSMC_PCCARD_Init(FSMC_PCCARD_TypeDef *Device, FSMC_PCCARD_InitTypeDef *Init)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_FSMC_PCCARD_DEVICE(Device));
|
|
assert_param(IS_FSMC_WAIT_FEATURE(Init->Waitfeature));
|
|
assert_param(IS_FSMC_TCLR_TIME(Init->TCLRSetupTime));
|
|
assert_param(IS_FSMC_TAR_TIME(Init->TARSetupTime));
|
|
|
|
/* Set FSMC_PCCARD device control parameters */
|
|
MODIFY_REG(Device->PCR4,
|
|
(FSMC_PCRx_PTYP | FSMC_PCRx_PWAITEN | FSMC_PCRx_PWID |
|
|
FSMC_PCRx_TCLR | FSMC_PCRx_TAR),
|
|
(FSMC_PCR_MEMORY_TYPE_PCCARD |
|
|
Init->Waitfeature |
|
|
FSMC_NAND_PCC_MEM_BUS_WIDTH_16 |
|
|
(Init->TCLRSetupTime << FSMC_PCRx_TCLR_Pos) |
|
|
(Init->TARSetupTime << FSMC_PCRx_TAR_Pos)));
|
|
|
|
return HAL_OK;
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief Initializes the FSMC_PCCARD Common space Timing according to the specified
|
|
* parameters in the FSMC_NAND_PCC_TimingTypeDef
|
|
* @param Device: Pointer to PCCARD device instance
|
|
* @param Timing: Pointer to PCCARD timing structure
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef FSMC_PCCARD_CommonSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_FSMC_PCCARD_DEVICE(Device));
|
|
assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
|
|
assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
|
|
assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
|
|
assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
|
|
|
|
/* Set PCCARD timing parameters */
|
|
MODIFY_REG(Device->PMEM4, PMEM_CLEAR_MASK,
|
|
(Timing->SetupTime |
|
|
((Timing->WaitSetupTime) << FSMC_PMEMx_MEMWAITx_Pos) |
|
|
((Timing->HoldSetupTime) << FSMC_PMEMx_MEMHOLDx_Pos) |
|
|
((Timing->HiZSetupTime) << FSMC_PMEMx_MEMHIZx_Pos)));
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Initializes the FSMC_PCCARD Attribute space Timing according to the specified
|
|
* parameters in the FSMC_NAND_PCC_TimingTypeDef
|
|
* @param Device: Pointer to PCCARD device instance
|
|
* @param Timing: Pointer to PCCARD timing structure
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef FSMC_PCCARD_AttributeSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_FSMC_PCCARD_DEVICE(Device));
|
|
assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
|
|
assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
|
|
assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
|
|
assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
|
|
|
|
/* Set PCCARD timing parameters */
|
|
MODIFY_REG(Device->PATT4, PATT_CLEAR_MASK, \
|
|
(Timing->SetupTime | \
|
|
((Timing->WaitSetupTime) << FSMC_PATTx_ATTWAITx_Pos) | \
|
|
((Timing->HoldSetupTime) << FSMC_PATTx_ATTHOLDx_Pos) | \
|
|
((Timing->HiZSetupTime) << FSMC_PATTx_ATTHIZx_Pos)));
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief Initializes the FSMC_PCCARD IO space Timing according to the specified
|
|
* parameters in the FSMC_NAND_PCC_TimingTypeDef
|
|
* @param Device: Pointer to PCCARD device instance
|
|
* @param Timing: Pointer to PCCARD timing structure
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef FSMC_PCCARD_IOSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_FSMC_PCCARD_DEVICE(Device));
|
|
assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
|
|
assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
|
|
assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
|
|
assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
|
|
|
|
/* Set FSMC_PCCARD device timing parameters */
|
|
MODIFY_REG(Device->PIO4, PIO4_CLEAR_MASK, \
|
|
(Timing->SetupTime | \
|
|
(Timing->WaitSetupTime << FSMC_PIO4_IOWAIT4_Pos) | \
|
|
(Timing->HoldSetupTime << FSMC_PIO4_IOHOLD4_Pos) | \
|
|
(Timing->HiZSetupTime << FSMC_PIO4_IOHIZ4_Pos)));
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief DeInitializes the FSMC_PCCARD device
|
|
* @param Device: Pointer to PCCARD device instance
|
|
* @retval HAL status
|
|
*/
|
|
HAL_StatusTypeDef FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device)
|
|
{
|
|
/* Check the parameters */
|
|
assert_param(IS_FSMC_PCCARD_DEVICE(Device));
|
|
|
|
/* Disable the FSMC_PCCARD device */
|
|
__FSMC_PCCARD_DISABLE(Device);
|
|
|
|
/* De-initialize the FSMC_PCCARD device */
|
|
WRITE_REG(Device->PCR4, 0x00000018U);
|
|
WRITE_REG(Device->SR4, 0x00000040U);
|
|
WRITE_REG(Device->PMEM4, 0xFCFCFCFCU);
|
|
WRITE_REG(Device->PATT4, 0xFCFCFCFCU);
|
|
WRITE_REG(Device->PIO4, 0xFCFCFCFCU);
|
|
|
|
return HAL_OK;
|
|
}
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
#endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
#endif /* HAL_SRAM_MODULE_ENABLED || HAL_NOR_MODULE_ENABLED || HAL_NAND_MODULE_ENABLED || HAL_PCCARD_MODULE_ENABLED */
|
|
|
|
#endif /* FSMC_BANK1 */
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|