klipper/lib/cmsis-stm32f1/source
Grigori Goronzy 75d5737211 Add STM32F103 port
Add a fully functional STM32F1 port, currently mostly targeting STM32F103
microcontrollers. This requires an 8 MHz XTAL. The maximum possible step rate
is around 282K steps per second.

This uses stm32flash to burn the firmware. The bootloader needs to be started
by setting BOOT0 to 1 and resetting the MCU. There is no automatic bootloader,
unlike on Arduino.

Signed-off-by: Grigori Goronzy <greg@kinoho.net>
2018-04-09 18:08:29 -04:00
..
startup_stm32f100xb.s
startup_stm32f100xe.s
startup_stm32f101x6.s
startup_stm32f101xb.s
startup_stm32f101xe.s
startup_stm32f101xg.s
startup_stm32f102x6.s
startup_stm32f102xb.s
startup_stm32f103x6.s
startup_stm32f103xb.s
startup_stm32f103xe.s
startup_stm32f103xg.s
startup_stm32f105xc.s
startup_stm32f107xc.s
stm32f1.ld
system_stm32f1xx.c