redstone99 14eec15267 safe_z_home: Fix final z hop to use relative z coordinates (#5879) ... After a G28 z-axis homing, there is a final z hop. It was hoping to height z_hop as an absolute z height rather than relative. If the z-axis home leaves the head at a z height higher than z_hop, e.g. because you were using a probe to do z homing, this meant that it was z hopping in the negative z direction, which could result in crashing the toolhead. Signed-off-by: Joshua Redstone <redstone@gmail.com>		2022-11-22 18:55:43 -05:00
..
chelper	kinematics: Add deltesian printers (#5743)	2022-09-01 15:56:31 -04:00
extras	safe_z_home: Fix final z hop to use relative z coordinates (#5879)	2022-11-22 18:55:43 -05:00
kinematics	kinematics: Add deltesian printers (#5743)	2022-09-01 15:56:31 -04:00
clocksync.py	msgblock: Add clock estimation helper functions	2021-06-09 18:58:35 -04:00
configfile.py	configfile: Expose options awaiting to be saved (#5270)	2022-06-20 12:10:57 -04:00
console.py	console: Add support for DUMP and FILEDUMP commands	2022-07-29 13:30:39 -04:00
gcode.py	gcode: Handle M117 and M118 commands that start with a special character	2022-01-18 11:34:40 -05:00
klippy.py	mcu: Delay reset signaling for usb to canbus bridge nodes	2022-07-29 11:40:54 -04:00
mathutil.py	mathutil: Disable queuelogger in background_coordinate_descent()	2019-12-17 09:51:45 -05:00
mcu.py	mcu: Delay reset signaling for usb to canbus bridge nodes	2022-07-29 11:40:54 -04:00
msgproto.py	spi_flash: Make SD updates more tolerant of flaky boards	2021-07-20 18:05:05 -04:00
parsedump.py	…
pins.py	pins: Improve pin description checks	2022-05-09 16:33:46 -04:00
queuelogger.py	klippy: Add Python2 module wrappers and use Python3 module naming	2021-10-04 14:36:08 -04:00
reactor.py	reactor: Add support for waiting on fds becoming writable	2022-07-06 09:54:44 -04:00
serialhdl.py	serialqueue: Improve canbus timing	2022-07-29 11:40:54 -04:00
stepper.py	extruder: Verify trapq is unmodified on default SET_PRESSURE_ADVANCE	2022-03-04 13:38:59 -05:00
toolhead.py	toolhead: Capture current junction_deviation in a Move class	2022-10-17 11:08:56 -04:00
util.py	util: Use regular str() type in get_git_version() on Python2	2021-10-31 13:52:31 -04:00
webhooks.py	webhooks: Close clients that become unresponsive	2022-07-06 09:54:44 -04:00