| .. |
|
example-corexy.cfg
|
…
|
|
|
example-corexz.cfg
|
corexz: Add CoreXZ kinematics (#3129)
|
2020-07-30 12:42:23 -04:00 |
|
example-delta.cfg
|
delta: Add print_radius option to customize valid XY radius
|
2020-01-23 21:14:09 -05:00 |
|
example-extras.cfg
|
uc1701: Add x_offset (Used to add horizontal offset on SSD1306/SH1106 displays) (#3284)
|
2020-09-09 23:07:40 -04:00 |
|
example-menu.cfg
|
menu: Replace menu with new Jinja2 template system (#2344)
|
2020-08-09 09:29:55 -04:00 |
|
example-polar.cfg
|
config: Fix stepper_bed step_distance description in example-polar.cfg
|
2019-07-01 11:00:37 -04:00 |
|
example-rotary-delta.cfg
|
rotary_delta: Initial support for rotary delta kinematics
|
2020-01-06 11:52:42 -05:00 |
|
example-winch.cfg
|
winch: Add experimental support for cable winch kinematics
|
2018-12-24 11:38:59 -05:00 |
|
example.cfg
|
config: Consolidate description of heater parameters in example.cfg
|
2020-07-25 11:56:21 -04:00 |
|
generic-archim2.cfg
|
config: Add example generic-archim2.cfg config
|
2020-01-23 18:32:52 -05:00 |
|
generic-azteeg-x5-mini-v3.cfg
|
config: Clarify which boards use lpc1768 vs lpc1769 when known
|
2019-06-20 11:23:30 -04:00 |
|
generic-bigtreetech-gtr.cfg
|
config: Add BigTreeTech GTR board generic config file (#2626)
|
2020-03-20 21:02:24 -04:00 |
|
generic-bigtreetech-skr-e3-dip.cfg
|
config: Fix EXP1 comment in generic-bigtreetech-skr-e3-dip.cfg
|
2019-10-23 16:07:08 -04:00 |
|
generic-bigtreetech-skr-mini-e3-v1.0.cfg
|
config: Fix uart addresses on generic-bigtreetech-skr-mini-e3-v1.0.cfg
|
2020-06-04 11:50:50 -04:00 |
|
generic-bigtreetech-skr-mini-e3-v1.2.cfg
|
config: Skr mini e3 v1.2 template (#2069)
|
2019-10-23 14:57:00 -04:00 |
|
generic-bigtreetech-skr-mini-e3-v2.0.cfg
|
config: Fix for SKR Mini-e3 v2.0 UART addresses (#3059)
|
2020-07-06 11:40:45 -04:00 |
|
generic-bigtreetech-skr-mini.cfg
|
config: Update bigtreetech skr boards to define EXP1/EXP2 plugs
|
2019-08-19 21:40:20 -04:00 |
|
generic-bigtreetech-skr-pro.cfg
|
config: Fix thermistor association in generic-bigtreetech-skr-pro.cfg (#2390)
|
2020-01-13 18:23:03 -05:00 |
|
generic-bigtreetech-skr-v1.1.cfg
|
config: Update bigtreetech skr boards to define EXP1/EXP2 plugs
|
2019-08-19 21:40:20 -04:00 |
|
generic-bigtreetech-skr-v1.3.cfg
|
config: Update several config files to use board aliases for lcd
|
2019-08-19 12:57:59 -04:00 |
|
generic-bigtreetech-skr-v1.4.cfg
|
config: Update generic-bigtreetech-skr-v1.4.cfg with diag1 pins
|
2020-06-15 16:48:08 -04:00 |
|
generic-cramps.cfg
|
…
|
|
|
generic-duet2-duex.cfg
|
tmc: Remove virtual_enable support and replace with automatic support
|
2019-11-12 18:45:31 -05:00 |
|
generic-duet2-maestro.cfg
|
adc_scaled: Add support for Duet2 Maestro "vref monitoring"
|
2020-09-09 22:20:54 -04:00 |
|
generic-duet2.cfg
|
tmc: Remove virtual_enable support and replace with automatic support
|
2019-11-12 18:45:31 -05:00 |
|
generic-einsy-rambo.cfg
|
…
|
|
|
generic-flyboard.cfg
|
config: Fix file permissions of generic-flyboard.cfg
|
2020-01-23 22:25:42 -05:00 |
|
generic-fysetc-cheetah-v1.1.cfg
|
config: Use restart_method=cheetah in generic-fysetc-cheetah-v1.1.cfg
|
2020-04-08 12:27:01 -04:00 |
|
generic-fysetc-cheetah-v1.2.cfg
|
config: Fix reset/restart on Fysetc Cheetah v1.2
|
2020-04-02 13:56:50 -04:00 |
|
generic-fysetc-f6.cfg
|
config: Fix generic-fysetc-f6.cfg stepper_z cs_pin
|
2020-02-03 15:45:46 -05:00 |
|
generic-fysetc-s6.cfg
|
config: Update generic-fysetc-s6.cfg (#2293)
|
2019-12-18 15:54:56 -05:00 |
|
generic-gt2560.cfg
|
config: Added example config file for Geeetech gt2560 controller.
|
2019-01-28 11:20:01 -05:00 |
|
generic-melzi.cfg
|
config: Use consistent advice on flashing the Melzi board
|
2018-11-13 14:32:52 -05:00 |
|
generic-mightyboard.cfg
|
config: Add generic-mightyboard.cfg
|
2020-01-23 17:49:10 -05:00 |
|
generic-mini-rambo.cfg
|
…
|
|
|
generic-minitronics1.cfg
|
config: Add a generic-minitronics1.cfg example config file
|
2018-12-20 11:09:20 -05:00 |
|
generic-mks-robin-e3.cfg
|
config: Example configuration for MKS Robin E3D/E3
|
2020-06-25 12:37:10 -04:00 |
|
generic-mks-robin-nano.cfg
|
config: Add example generic-mks-robin-nano.cfg config
|
2020-03-26 11:53:06 -04:00 |
|
generic-mks-sgenl.cfg
|
config: Pin logic on MKS SGEN L generic config (#2606)
|
2020-03-08 14:36:09 -04:00 |
|
generic-printrboard-g2.cfg
|
config: Add generic-printrboard-g2.cfg config file
|
2019-06-21 23:12:31 -04:00 |
|
generic-printrboard.cfg
|
config: Flash instructions for printrboard (#2278)
|
2019-12-17 10:03:57 -05:00 |
|
generic-radds.cfg
|
config: Added encoder pins to radds example config
|
2019-01-02 17:46:06 -05:00 |
|
generic-rambo.cfg
|
config: Update several config files to use board aliases for lcd
|
2019-08-19 12:57:59 -04:00 |
|
generic-ramps.cfg
|
config: Update several config files to use board aliases for lcd
|
2019-08-19 12:57:59 -04:00 |
|
generic-re-arm.cfg
|
config: Clarify which boards use lpc1768 vs lpc1769 when known
|
2019-06-20 11:23:30 -04:00 |
|
generic-replicape.cfg
|
config: Replicape config updates with pin aliases (#3269)
|
2020-09-01 11:00:48 -04:00 |
|
generic-rumba.cfg
|
config: Update extra extruder pins in generic-rumba.cfg
|
2019-03-14 11:48:25 -04:00 |
|
generic-simulavr.cfg
|
config: Rename avrsim.cfg to generic-simulavr.cfg
|
2019-11-24 20:21:13 -05:00 |
|
generic-smoothieboard.cfg
|
lpc176x: Add support for flashing via "make flash"
|
2019-03-08 22:22:41 -05:00 |
|
generic-ultimaker-ultimainboard-v2.cfg
|
config: Add Ultimaker UltiMainboard v2 config. (#2696)
|
2020-04-08 11:26:39 -04:00 |
|
kit-voron2-250mm.cfg
|
probe: Move multi-sampling capability from ProbePointsHelper to Probe
|
2019-06-06 10:08:58 -04:00 |
|
kit-zav3d-2019.cfg
|
test: update sample configs and test configs with new bed_mesh options
|
2020-01-09 14:14:13 -05:00 |
|
printer-adimlab-2018.cfg
|
config: ADIMlab Add support for LCD knob and caselight
|
2018-10-19 11:10:32 -04:00 |
|
printer-alfawise-u30-2018.cfg
|
config: Add example printer-alfawise-u30-2018.cfg config
|
2020-03-30 21:29:57 -04:00 |
|
printer-anet-a4-2018.cfg
|
config: Add printer-anet-a4-2018.cfg config file
|
2019-12-15 22:12:58 -05:00 |
|
printer-anet-a8-2017.cfg
|
config: Add button support for anet a8
|
2019-04-19 10:43:22 -04:00 |
|
printer-anet-e10-2018.cfg
|
…
|
|
|
printer-anet-e16-2019.cfg
|
config: Add printer-anet-e16-2019.cfg example config file
|
2020-05-11 12:34:58 -04:00 |
|
printer-anycubic-4max-2018.cfg
|
config: Added Anycubic 4Max printer config file
|
2019-03-22 13:02:01 -04:00 |
|
printer-anycubic-i3-mega-2017.cfg
|
…
|
|
|
printer-anycubic-kossel-2016.cfg
|
config: Make the Anycubic delta configurations as similar as possible
|
2018-11-25 17:14:16 -05:00 |
|
printer-anycubic-kossel-plus-2017.cfg
|
config: Update printer-anycubic-kossel-plus-2017.cfg (#2775)
|
2020-05-02 09:31:23 -04:00 |
|
printer-creality-cr10-2017.cfg
|
config: Use "ATC Semitec 104GT-2" for CR10 (and similar) heater beds
|
2019-02-08 12:20:16 -05:00 |
|
printer-creality-cr10mini-2017.cfg
|
config: Use "ATC Semitec 104GT-2" for CR10 (and similar) heater beds
|
2019-02-08 12:20:16 -05:00 |
|
printer-creality-cr10s-2017.cfg
|
config: Use position_endstop=0 for Creality printers
|
2019-08-31 11:43:02 -04:00 |
|
printer-creality-cr20-2018.cfg
|
config: Use position_endstop=0 for Creality printers
|
2019-08-31 11:43:02 -04:00 |
|
printer-creality-cr20-pro-2019.cfg
|
test: update sample configs and test configs with new bed_mesh options
|
2020-01-09 14:14:13 -05:00 |
|
printer-creality-ender2-2017.cfg
|
config: Use consistent advice on flashing the Melzi board
|
2018-11-13 14:32:52 -05:00 |
|
printer-creality-ender3-2018.cfg
|
config: Add homing order not to Ender 3 config (#3069)
|
2020-08-09 21:12:09 -04:00 |
|
printer-creality-ender3-v2-2020.cfg
|
config: Minor updates to printer-creality-ender3-v2-2020.cfg
|
2020-08-02 16:27:31 -04:00 |
|
printer-creality-ender3pro-2020.cfg
|
config: Add printer-creality-ender3pro-2020.cfg to printers.test
|
2020-08-30 21:53:26 -04:00 |
|
printer-creality-ender5-2019.cfg
|
config: Fix printer-creality-ender5-2019.cfg positions flipped
|
2020-07-19 19:46:29 -04:00 |
|
printer-creality-ender5plus-2019.cfg
|
config: Add printer-creality-ender5plus-2019.cfg example config
|
2020-06-25 12:45:47 -04:00 |
|
printer-lulzbot-mini1-2016.cfg
|
config: Minor updates to printer-lulzbot-mini1-2016.cfg
|
2019-11-05 10:57:47 -05:00 |
|
printer-lulzbot-taz6-2017.cfg
|
config: Fix minor typo in printer-lulzbot-taz6-2017.cfg
|
2020-02-18 12:11:19 -05:00 |
|
printer-lulzbot-taz6-dual-v3-2017.cfg
|
config: Lulzbot TAZ6 w/ Dual v3 Toolhead Config (#2111)
|
2019-10-30 12:37:22 -04:00 |
|
printer-makergear-m2-2012.cfg
|
endstop_phase: Move endstop phase homing code to new "extras" module
|
2018-10-16 13:09:23 -04:00 |
|
printer-makergear-m2-2016.cfg
|
config: Add example config printer-makergear-m2-2016.cfg
|
2020-06-04 12:01:30 -04:00 |
|
printer-micromake-d1-2016.cfg
|
config: Add printer-micromake-d1-2016.cfg example config file
|
2018-12-18 20:59:43 -05:00 |
|
printer-monoprice-mini-delta-2017.cfg
|
test: Add printer-monoprice-mini-delta-2017.cfg to printers.test
|
2020-01-23 23:29:32 -05:00 |
|
printer-mtw-create-2015.cfg
|
config: Add example printer-mtw-create-2015.cfg config file
|
2020-01-24 09:28:03 -05:00 |
|
printer-seemecnc-rostock-max-v2-2015.cfg
|
config: Update printer-seemecnc-rostock-max-v2-2015.cfg (#2561)
|
2020-02-25 15:54:49 -05:00 |
|
printer-sovol-sv01-2020.cfg
|
config: Add printer-sovol-sv01-2020.cfg example config
|
2020-04-29 21:13:11 -04:00 |
|
printer-tevo-flash-2018.cfg
|
test: update sample configs and test configs with new bed_mesh options
|
2020-01-09 14:14:13 -05:00 |
|
printer-tevo-tarantula-pro-2020.cfg
|
config: Tarantula Pro - Multiple tweaks and description change (#3230)
|
2020-08-24 18:23:50 -04:00 |
|
printer-tronxy-p802e-2020.cfg
|
test: Fix printer-tronxy-p802e-2020.cfg and add to printers.test
|
2020-04-14 22:19:08 -04:00 |
|
printer-tronxy-p802m-2020.cfg
|
config: Create printer-tronxy-p802m-2020.cfg (#2796)
|
2020-04-29 20:45:19 -04:00 |
|
printer-tronxy-x5s-2018.cfg
|
config: Add buttons to printer-tronxy-x5s-2018.cfg
|
2019-03-01 00:09:30 -05:00 |
|
printer-tronxy-x5sa-v6-2019.cfg
|
config: fixed update file extension for TronXY X5SA
|
2020-09-04 19:28:48 -04:00 |
|
printer-tronxy-x8-2018.cfg
|
…
|
|
|
printer-twotrees-sapphire-pro-2020.cfg
|
config: Add example printer-twotrees-sapphire-pro-2020.cfg config
|
2020-03-26 11:53:06 -04:00 |
|
printer-velleman-k8200-2013.cfg
|
config: Add printer-velleman-k8200-2013.cfg example config
|
2018-11-13 10:46:57 -05:00 |
|
printer-wanhao-duplicator-6-2016.cfg
|
config: Add display section to printer-wanhao-duplicator-6-2016.cfg
|
2019-09-14 19:52:19 -04:00 |
|
printer-wanhao-duplicator-9-2018.cfg
|
config: add mesh_min to printer-wanhao-duplicator-9-2018.cfg (#2525)
|
2020-02-17 20:59:08 -05:00 |
|
printer-wanhao-duplicator-i3-mini-2017.cfg
|
test: Add printer-wanhao-duplicator-i3-mini-2017.cfg to build tests
|
2019-12-03 13:34:46 -05:00 |
|
printer-wanhao-duplicator-i3-plus-2017.cfg
|
…
|
|
|
printer-wanhao-duplicator-i3-plus-mark2-2019.cfg
|
test: update sample configs and test configs with new bed_mesh options
|
2020-01-09 14:14:13 -05:00 |
|
printer-wanhao-duplicator-i3-v2.1-2017.cfg
|
config: Use consistent advice on flashing the Melzi board
|
2018-11-13 14:32:52 -05:00 |
|
sample-bigtreetech-exp-mot.cfg
|
config: add sample-bigtreetech-exp-mot.cfg (#3135)
|
2020-08-06 14:19:37 -04:00 |
|
sample-glyphs.cfg
|
config: Added some sample glyphs for 128x64 screens (#3028)
|
2020-07-02 07:37:59 -04:00 |
|
sample-idex.cfg
|
config: Add multi extruder sample files
|
2019-12-10 14:24:34 -05:00 |
|
sample-lcd.cfg
|
config: Update "Fysetc Mini 12864Panel" in sample-lcd.cfg
|
2019-12-04 09:13:46 -05:00 |
|
sample-macros.cfg
|
htu21d: Support for HTI21D family sensor on I2C bus (#2803)
|
2020-05-03 18:47:24 -04:00 |
|
sample-mmu2s-diy.cfg
|
config: Example for MMU2S DIY (#2566)
|
2020-03-01 22:08:37 -05:00 |
|
sample-multi-extruder.cfg
|
config: Add multi extruder sample files
|
2019-12-10 14:24:34 -05:00 |
|
sample-multi-mcu.cfg
|
config: Rename example-multi-mcu.cfg to sample-multi-mcu.cfg
|
2019-11-24 20:21:13 -05:00 |
|
sample-probe-as-z-endstop.cfg
|
test: update sample configs and test configs with new bed_mesh options
|
2020-01-09 14:14:13 -05:00 |
|
sample-raspberry-pi.cfg
|
docs: LinuxMCU doc & script (#2956)
|
2020-06-12 20:32:12 -04:00 |
