3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
klipper/src
History
Kevin O'Connor 8977c4e764 rp2040: Fix watchdog enable 
The rp2040 watchdog does not actually reset anything by default.  The
psm_hw->wdsel field must be programmed to actually get a reset on a
watchdog failure.  Program that field so the watchdog is usable.

Also, disable the watchdog before attempting a reboot into the
bootloader.  Otherwise the machine may just reboot a second time due
to a missed watchdog event in the bootloader.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 		2022-11-19 10:13:50 -05:00
..
atsam armcm_reset: Introduce Kconfig FLASH_BOOT_ADDRESS value 2022-11-08 09:53:04 -05:00
atsamd armcm_reset: Introduce Kconfig FLASH_BOOT_ADDRESS value 2022-11-08 09:53:04 -05:00
avr usb_cdc: Rename usb_request_bootloader() to bootloader_request() 2022-07-29 11:40:54 -04:00
generic armcm_reset: Introduce Kconfig FLASH_BOOT_ADDRESS value 2022-11-08 09:53:04 -05:00
linux linux: use correct gpio bias flags (#5878) 2022-11-08 09:56:52 -05:00
lpc176x armcm_reset: Introduce Kconfig FLASH_BOOT_ADDRESS value 2022-11-08 09:53:04 -05:00
pru misc: Import misc.h in all files defining console_sendf() 2022-05-13 11:22:47 -04:00
rp2040 rp2040: Fix watchdog enable 2022-11-19 10:13:50 -05:00
simulator
…
stm32 armcm_reset: Introduce Kconfig FLASH_BOOT_ADDRESS value 2022-11-08 09:53:04 -05:00
Kconfig atsamd: Add Kconfig definitions for same51j19 and same54p20 chips 2022-10-13 11:27:14 -04:00
Makefile mpu9250: Adding support for MPU-9250 (and MPU-6050) accelerometer 2022-06-16 11:09:33 -04:00
adccmds.c
…
basecmd.c mcu: Make a minor change to the protocol to require mcu update 2021-11-06 18:47:44 -04:00
basecmd.h stepper: Use a reusable interface to the "move queue" 2020-12-04 16:10:13 -05:00
buttons.c
…
byteorder.h
…
command.c command: Make command_add_frame() and command_encodef() static 2021-10-21 01:25:17 -04:00
command.h command: Make command_add_frame() and command_encodef() static 2021-10-21 01:25:17 -04:00
compiler.h
…
ctr.h
…
debugcmds.c debugcmds: Remove start/end_group commands 2021-05-07 13:53:47 -04:00
endstop.c trsync: Introduce new "trigger synchronization" support 2021-06-09 18:58:35 -04:00
gpiocmds.c gpiocmds: Merge digital output and soft pwm code 2020-12-10 12:06:26 -05:00
i2ccmds.c mpu9250: Adding support for MPU-9250 (and MPU-6050) accelerometer 2022-06-16 11:09:33 -04:00
i2ccmds.h mpu9250: Adding support for MPU-9250 (and MPU-6050) accelerometer 2022-06-16 11:09:33 -04:00
initial_pins.c
…
initial_pins.h
…
lcd_hd44780.c lcd_st7920: Check CONFIG_MACH_AVR for slow mcus 2021-07-04 10:11:02 -04:00
lcd_st7920.c lcd_st7920: Check CONFIG_MACH_AVR for slow mcus 2021-07-04 10:11:02 -04:00
neopixel.c
…
pulse_counter.c pulse_counter: Use "clock" suffix instead of "time" in commands 2021-04-30 11:40:37 -04:00
pwmcmds.c pwmcmds: Use move queue for hard PWM 2020-12-04 16:10:13 -05:00
sched.c sched: Move last_insert check for improved gcc code layout 2021-11-09 20:20:24 -05:00
sched.h
…
sensor_adxl345.c adxl345: Compress each sample from 6 bytes to 5 bytes 2021-08-30 12:25:50 -04:00
sensor_angle.c sensor_angle: Support TLE5012b frame counter for timing 2022-03-29 20:34:46 -04:00
sensor_mpu9250.c mpu9250: Adding support for MPU-9250 (and MPU-6050) accelerometer 2022-06-16 11:09:33 -04:00
spi_software.c
…
spi_software.h
…
spicmds.c spicmds: Allow inversion of CS pin for SPI busses 2022-04-22 13:25:03 -04:00
spicmds.h sensor_angle: Add support for bulk querying of spi angle sensors 2022-03-29 20:34:46 -04:00
stepper.c stepper: Move min_next_time check to stepper_event_full() 2021-11-04 12:06:27 -04:00
stepper.h trsync: Introduce new "trigger synchronization" support 2021-06-09 18:58:35 -04:00
thermocouple.c thermocouple: Only shutdown on multiple consecutive sensor errors 2022-09-23 11:56:20 -04:00
tmcuart.c
…
trsync.c trsync: Introduce new "trigger synchronization" support 2021-06-09 18:58:35 -04:00
trsync.h trsync: Introduce new "trigger synchronization" support 2021-06-09 18:58:35 -04:00