klipper

History

Sami Haahtinen 3417940fd8 hall_filament_width_sensor: max filament diameter Add support for maximum filament diameter to hall filament width sensor. If the diameter of the filament diameter is larger than the limit, the virtual runout sensor will trigger. The default value is set to maximum flow adjustment threshold to prevent oversized filament from clogging. Signed-off-by: Sami Haahtinen <ressu@ressukka.net>		2023-12-17 11:13:33 -05:00
..
_klipper3d	docs: add info about requesting bootloaders	2023-10-12 20:53:31 -04:00
img	docs: Add Peopoly to Sponsors.md	2023-09-26 16:51:38 -04:00
prints	…
API_Server.md	…
Axis_Twist_Compensation.md	axis_twist_compensation: Add X twist compensation module (#6149 )	2023-08-01 13:08:53 -04:00
BLTouch.md	…
Beaglebone.md	…
Bed_Level.md	…
Bed_Mesh.md	docs: update Bed Mesh documentation	2023-06-20 11:48:17 -04:00
Benchmarks.md	…
Bootloader_Entry.md	docs: Fix a typo in serial bootloader entry docs	2023-10-19 13:10:05 -04:00
Bootloaders.md	config: Add 1LC example configuration and docs	2023-08-13 15:32:27 -04:00
CANBUS.md	docs: Add new CANBUS_Troubleshooting.md document	2023-05-30 20:16:28 -04:00
CANBUS_Troubleshooting.md	parsecandump: New utility to parse Klipper messages in a candump capture	2023-05-30 20:18:41 -04:00
CANBUS_protocol.md	…
CNAME	…
CONTRIBUTING.md	docs: Update reviewers in CONTRIBUTING.md	2023-03-15 14:55:51 -04:00
Code_Overview.md	…
Command_Templates.md	…
Config_Changes.md	hall_filament_width_sensor: max filament diameter	2023-12-17 11:13:33 -05:00
Config_Reference.md	hall_filament_width_sensor: max filament diameter	2023-12-17 11:13:33 -05:00
Config_checks.md	Config_checks: Missing ! in pin inversion example in Verify endstops	2023-10-19 13:13:57 -04:00
Contact.md	docs: Update Contact.md to note other common ways to obtain Klipper log file	2023-11-01 19:04:13 -04:00
Debugging.md	…
Delta_Calibrate.md	…
Endstop_Phase.md	…
Example_Configs.md	…
Exclude_Object.md	…
FAQ.md	…
Features.md	docs: Update Features.md	2023-11-10 18:35:59 -05:00
G-Codes.md	docs: Improve max_accel documentation in Config_Reference.md	2023-12-05 17:42:53 -05:00
Hall_Filament_Width_Sensor.md	…
Installation.md	doc: updates to Installation.md (#6398 )	2023-12-03 21:10:59 -05:00
Kinematics.md	…
MCU_Commands.md	…
Manual_Level.md	…
Measuring_Resonances.md	docs: Add how to configure LIS2DW instructions	2023-08-21 14:26:46 -04:00
Multi_MCU_Homing.md	…
Overview.md	docs: add info about requesting bootloaders	2023-10-12 20:53:31 -04:00
Packaging.md	…
Pressure_Advance.md	…
Probe_Calibrate.md	…
Protocol.md	…
README.md	…
RPi_microcontroller.md	docs: fix typo in RPi_microcontroller.md	2023-09-29 13:58:29 -04:00
Releases.md	docs: Note the release of v0.12.0	2023-11-10 18:36:19 -05:00
Resonance_Compensation.md	idex_modes: COPY and MIRROR mode implementation (#6297 )	2023-08-01 12:23:52 -04:00
Rotation_Distance.md	…
SDCard_Updates.md	docs: Update the Contact document	2023-11-01 19:04:13 -04:00
Skew_Correction.md	…
Slicers.md	docs: Add missing code block indicators to Slicers.md(#6161 )	2023-04-11 11:39:41 -04:00
Sponsors.md	docs: Add Peopoly to Sponsors.md	2023-09-26 16:51:38 -04:00
Status_Reference.md	gcode: expose status with available commands	2023-12-11 11:51:51 -05:00
TMC_Drivers.md	tmc: Fix s2vs field formatters	2023-03-07 10:52:52 -05:00
TSL1401CL_Filament_Width_Sensor.md	…
Using_PWM_Tools.md	pwm_tool: Add support for high-speed PWM pin updates	2023-11-16 22:07:15 -05:00
developer-certificate-of-origin	…
index.md	…

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.