klipper

Клиппер

Go to file

Florian Heilmann 10987003b0 safe_z_home: Make sure X and Y are homed before homing Z (#3153 ) In it's current behavior, safe_z_home will attempt to home Z if it thinks the toolhead is above the z endstop even if the motors have since been disabled and the toolhead was moved to another position Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>		2020-08-05 11:52:23 -04:00
config	config: Minor updates to printer-creality-ender3-v2-2020.cfg	2020-08-02 16:27:31 -04:00
docs	docs: Add uninstall notes to faq	2020-08-03 14:16:34 -04:00
klippy	safe_z_home: Make sure X and Y are homed before homing Z (#3153 )	2020-08-05 11:52:23 -04:00
lib	stm32: Initial support for stm32f2 (#3001 )	2020-06-23 10:52:15 -04:00
scripts	update_mks_robin: Remove unnecessary imports	2020-07-24 11:02:15 -04:00
src	linux: Set the SPI mode in spidev.c	2020-07-31 23:18:46 -04:00
test	config: Minor updates to printer-creality-ender3-v2-2020.cfg	2020-08-02 16:27:31 -04:00
.gitignore	util: Fix versioning when gitdir is absent (#809 )	2018-10-27 10:44:38 -04:00
.travis.yml	linux: userspace GPIO control	2020-05-17 22:17:15 -04:00
COPYING	Initial commit of source code.	2016-05-25 11:37:40 -04:00
Makefile	Makefile: fixed missing dependency on autoconf.h	2020-06-15 17:14:58 -04:00
README.md	docs: Update main README file to point to website	2019-04-20 13:43:35 -04:00

README.md

Welcome to the Klipper project!

https://www.klipper3d.org/

Klipper is a 3d-Printer firmware. It combines the power of a general purpose computer with one or more micro-controllers. See the features document for more information on why you should use Klipper.

To begin using Klipper start by installing it.

Klipper is Free Software. See the license or read the documentation.