Grigori Goronzy 75d5737211 Add STM32F103 port ... Add a fully functional STM32F1 port, currently mostly targeting STM32F103 microcontrollers. This requires an 8 MHz XTAL. The maximum possible step rate is around 282K steps per second. This uses stm32flash to burn the firmware. The bootloader needs to be started by setting BOOT0 to 1 and resetting the MCU. There is no automatic bootloader, unlike on Arduino. Signed-off-by: Grigori Goronzy <greg@kinoho.net>		2018-04-09 18:08:29 -04:00
..
stm32f1xx_hal.c	…
stm32f1xx_hal_adc.c	…
stm32f1xx_hal_adc_ex.c	…
stm32f1xx_hal_can.c	…
stm32f1xx_hal_cec.c	…
stm32f1xx_hal_cortex.c	…
stm32f1xx_hal_crc.c	…
stm32f1xx_hal_dac.c	…
stm32f1xx_hal_dac_ex.c	…
stm32f1xx_hal_dma.c	…
stm32f1xx_hal_eth.c	…
stm32f1xx_hal_flash.c	…
stm32f1xx_hal_flash_ex.c	…
stm32f1xx_hal_gpio.c	…
stm32f1xx_hal_gpio_ex.c	…
stm32f1xx_hal_hcd.c	…
stm32f1xx_hal_i2c.c	…
stm32f1xx_hal_i2s.c	…
stm32f1xx_hal_irda.c	…
stm32f1xx_hal_iwdg.c	…
stm32f1xx_hal_mmc.c	…
stm32f1xx_hal_msp_template.c	…
stm32f1xx_hal_nand.c	…
stm32f1xx_hal_nor.c	…
stm32f1xx_hal_pccard.c	…
stm32f1xx_hal_pcd.c	…
stm32f1xx_hal_pcd_ex.c	…
stm32f1xx_hal_pwr.c	…
stm32f1xx_hal_rcc.c	…
stm32f1xx_hal_rcc_ex.c	…
stm32f1xx_hal_rtc.c	…
stm32f1xx_hal_rtc_ex.c	…
stm32f1xx_hal_sd.c	…
stm32f1xx_hal_smartcard.c	…
stm32f1xx_hal_spi.c	…
stm32f1xx_hal_spi_ex.c	…
stm32f1xx_hal_sram.c	…
stm32f1xx_hal_tim.c	…
stm32f1xx_hal_tim_ex.c	…
stm32f1xx_hal_timebase_rtc_alarm_template.c	…
stm32f1xx_hal_timebase_tim_template.c	…
stm32f1xx_hal_uart.c	…
stm32f1xx_hal_usart.c	…
stm32f1xx_hal_wwdg.c	…
stm32f1xx_ll_adc.c	…
stm32f1xx_ll_crc.c	…
stm32f1xx_ll_dac.c	…
stm32f1xx_ll_dma.c	…
stm32f1xx_ll_exti.c	…
stm32f1xx_ll_fsmc.c	…
stm32f1xx_ll_gpio.c	…
stm32f1xx_ll_i2c.c	…
stm32f1xx_ll_pwr.c	…
stm32f1xx_ll_rcc.c	…
stm32f1xx_ll_rtc.c	…
stm32f1xx_ll_sdmmc.c	…
stm32f1xx_ll_spi.c	…
stm32f1xx_ll_tim.c	…
stm32f1xx_ll_usart.c	…
stm32f1xx_ll_usb.c	…
stm32f1xx_ll_utils.c	…