59 lines
1.3 KiB
INI
59 lines
1.3 KiB
INI
# This file contains common pin mappings for the Huvud V0.61 by Bondus.
|
|
# https://github.com/bondus/Klipperhuvudboard
|
|
# To use this config, copy the contents into your main config file.
|
|
|
|
# The huvud is not capable of running a printer on it's own. It
|
|
# needs to be paired with another board that will control other
|
|
# aspects of the printer.
|
|
|
|
# The firmware should be compiled for the STM32F103 with a "2KiB
|
|
# bootloader" and a "8MHz crystal" clock reference.
|
|
# Select CAN bus (on PB8/PB9) or USB under communication interface.
|
|
# Flash by running make flash FLASH_DEVICE=1209:beba
|
|
|
|
# See docs/Config_Reference.md for a description of parameters.
|
|
|
|
[mcu huvud]
|
|
canbus_uuid: ac20f0bbda05
|
|
# Identify your canbus_uuid by running:
|
|
# ~/klippy-env/bin/python ~/klipper/scripts/canbus_query.py can0
|
|
|
|
[extruder]
|
|
step_pin: huvud:PB3
|
|
dir_pin: huvud:PB4
|
|
enable_pin: !huvud:PB5
|
|
rotation_distance: 22.52453125
|
|
nozzle_diameter: 0.400
|
|
filament_diameter: 1.75
|
|
heater_pin: huvud:PA6
|
|
sensor_type: NTC 100K MGB18-104F39050L32
|
|
sensor_pin: huvud:PA0
|
|
pullup_resistor: 2200
|
|
min_temp: 0
|
|
max_temp: 300
|
|
control: pid
|
|
pid_kp: 26.213
|
|
pid_ki: 1.304
|
|
pid_kd: 131.721
|
|
|
|
[tmc2209 extruder]
|
|
uart_pin: huvud:PA10
|
|
tx_pin: huvud:PA9
|
|
run_current: 0.35
|
|
|
|
[probe]
|
|
pin: huvud:PB12
|
|
z_offset: 0
|
|
|
|
[fan]
|
|
pin: huvud:PA8
|
|
|
|
[heater_fan extruder_fan]
|
|
pin: huvud:PA7
|
|
|
|
[adxl345]
|
|
cs_pin: PB1
|
|
|
|
[led huvud_led]
|
|
blue_pin: huvud:PC13
|