Kevin O'Connor 5791a4d8c4 toolhead: Set commanded_pos[] to move.end_pos ... Commit 4573932f allowed move.end_pos to differ from the requested end position - the toolhead class should use the updated position when storing its commanded position. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>		2018-09-11 13:45:33 -04:00
..
chelper	serialqueue: Increase receive message debug queue to 100 messages	2018-09-02 12:16:13 -04:00
extras	tmc2660: Implementation of TMC2660 extra (#621)	2018-09-11 12:34:05 -04:00
kinematics	kinematics: Convert get_rails() method to get_steppers()	2018-07-16 10:16:16 -04:00
clocksync.py	clocksync: Simplify is_active() check	2018-05-31 18:20:30 -04:00
console.py	console: Use reactor register_callback() mechanism	2018-09-02 12:31:36 -04:00
gcode.py	gcode: M117 fix	2018-08-22 12:53:42 -04:00
heater.py	thermocouple: Add initial support for common SPI temperature sensing chips	2018-07-24 11:16:05 -04:00
homing.py	query_endstops: Move QUERY_ENDSTOP command to it own extras/ module	2018-07-16 10:06:30 -04:00
klippy.py	mcu: Log MCU information before configuring	2018-09-03 18:34:10 -04:00
mathutil.py	mathutil: Log starting error in coordinate_descent()	2018-07-24 08:32:35 -04:00
mcu.py	mcu: Log MCU information before configuring	2018-09-03 18:34:10 -04:00
msgproto.py	…
parsedump.py	…
pins.py	pins: Verify the pin_map setting	2018-09-03 18:16:44 -04:00
queuelogger.py	…
reactor.py	reactor: Add ability to register callbacks	2018-06-30 14:13:47 -04:00
serialhdl.py	serialqueue: Limit message transmission to available receive buffer size	2018-05-28 11:12:30 -04:00
stepper.py	force_move: Rename stepper_buzz.py to force_move.py	2018-07-26 11:15:51 -04:00
toolhead.py	toolhead: Set commanded_pos[] to move.end_pos	2018-09-11 13:45:33 -04:00
util.py	…