Kevin O'Connor 6f5f2a3bc7 tmc_uart: Make sure to set analog mux pins after a restart ... Don't assume the analog mux pins are in a low state at startup. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>		2019-10-24 22:00:58 -04:00
..
chelper	stepcompress: Remove no longer needed stepcompress_set_homing()	2019-07-10 10:43:20 -04:00
extras	tmc_uart: Make sure to set analog mux pins after a restart	2019-10-24 22:00:58 -04:00
kinematics	kinematics: Add get_status() method to kinematics	2019-08-09 20:49:17 -04:00
clocksync.py	mcu: Support minclock in send_with_response() requests	2019-06-21 21:42:20 -04:00
configfile.py	configfile: Fix the exception raised when an included file is missing (#1931)	2019-09-01 18:28:18 -04:00
console.py	console: Update for PinResolver changes	2019-08-19 23:52:02 -04:00
gcode.py	gcode: Allow M105 to produce output if called from a macro	2019-09-18 09:58:16 -04:00
heater.py	…
homing.py	homing: Remove no longer needed homing time delay code	2019-07-10 10:43:20 -04:00
klippy.py	klippy: Warn if starting klippy with logging disabled	2019-09-01 18:09:20 -04:00
mathutil.py	…
mcu.py	mcu: Prevent "math domain errors" in stats calculation	2019-08-30 13:57:07 -04:00
msgproto.py	…
parsedump.py	…
pins.py	board_pins: Add a new "extras" module to support per-board pin aliases	2019-08-19 12:57:59 -04:00
queuelogger.py	…
reactor.py	reactor: Add support for "completions"	2019-07-10 10:43:20 -04:00
serialhdl.py	serialhdl: Update SendWithRetry to use reactor completions	2019-07-10 10:43:20 -04:00
stepper.py	stepper: Add support for providing a list of pins to enable	2019-06-28 16:59:26 -04:00
toolhead.py	tuning_tower: Tool for tuning parameters based on print Z height	2019-10-01 14:46:24 -04:00
util.py	…