3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
klipper/docs
History
Kevin O'Connor 08444a8b89 docs: Try to make the klippy.log bug reporting more clear 
Emphasize that the log file needs to be attached to the issue.
Encourage M112 to be issued on every bug report.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 		2018-01-21 13:08:31 -05:00
..
img docs: Try to make the klippy.log bug reporting more clear 2018-01-21 13:08:31 -05:00
prints docs: Minor update to square.scad 2018-01-02 21:56:29 -05:00
CONTRIBUTING.md docs: Add a CONTRIBUTING document 2017-12-24 12:33:01 -05:00
Code_Overview.md docs: Add a section on time handling to Code_Overview.md 2017-09-27 15:11:15 -04:00
Config_checks.md docs: Add an initial configuration checklist document 2017-12-26 20:54:37 -05:00
Contact.md docs: Try to make the klippy.log bug reporting more clear 2018-01-21 13:08:31 -05:00
Debugging.md docs: Update Debugging.md with information on logextract 2018-01-11 13:48:40 -05:00
FAQ.md docs: Add a FAQ item on steps to upgrade the software 2018-01-12 18:38:49 -05:00
Features.md docs: Reword performance paragraph in Features.md 2017-09-27 13:59:47 -04:00
Installation.md docs: Update installation document with pointers to FAQ 2018-01-04 13:29:17 -05:00
Kinematics.md toolhead: Permit look-ahead between Z moves 2017-09-03 15:46:48 -04:00
MCU_Commands.md gpiocmds: Allow the start value for a pin to differ from the default_value 2017-10-12 11:59:27 -04:00
Overview.md docs: Add an initial configuration checklist document 2017-12-26 20:54:37 -05:00
Pressure_Advance.md docs: Note pressure_advance over 0.20 is unlikely to improve quality 2018-01-08 11:07:26 -05:00
Protocol.md docs: Use only single space at start of new sentence 2017-05-01 11:58:32 -04:00
README.md docs: Improve documentation for those starting in docs/ 2017-04-27 16:05:26 -04:00
Releases.md docs: Note version 0.5.0 release 2017-10-25 11:27:20 -04:00
Todo.md stepper: Automatically detect and handle shared stepper enable lines 2018-01-10 19:10:26 -05:00
beaglebone.md docs: Point to beaglebone.md from the main installation document 2017-10-11 21:03:13 -04:00
developer-certificate-of-origin docs: Add a CONTRIBUTING document 2017-12-24 12:33:01 -05:00

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.