/** ****************************************************************************** * @file stm32f1xx_hal_flash_ex.h * @author MCD Application Team * @version V1.1.1 * @date 12-May-2017 * @brief Header file of Flash HAL Extended module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F1xx_HAL_FLASH_EX_H #define __STM32F1xx_HAL_FLASH_EX_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f1xx_hal_def.h" /** @addtogroup STM32F1xx_HAL_Driver * @{ */ /** @addtogroup FLASHEx * @{ */ /** @addtogroup FLASHEx_Private_Constants * @{ */ #define FLASH_SIZE_DATA_REGISTER 0x1FFFF7E0U #define OBR_REG_INDEX 1U #define SR_FLAG_MASK ((uint32_t)(FLASH_SR_BSY | FLASH_SR_PGERR | FLASH_SR_WRPRTERR | FLASH_SR_EOP)) /** * @} */ /** @addtogroup FLASHEx_Private_Macros * @{ */ #define IS_FLASH_TYPEERASE(VALUE) (((VALUE) == FLASH_TYPEERASE_PAGES) || ((VALUE) == FLASH_TYPEERASE_MASSERASE)) #define IS_OPTIONBYTE(VALUE) (((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA))) #define IS_WRPSTATE(VALUE) (((VALUE) == OB_WRPSTATE_DISABLE) || ((VALUE) == OB_WRPSTATE_ENABLE)) #define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) || ((LEVEL) == OB_RDP_LEVEL_1)) #define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == OB_DATA_ADDRESS_DATA0) || ((ADDRESS) == OB_DATA_ADDRESS_DATA1)) #define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW)) #define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST)) #define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST)) #if defined(FLASH_BANK2_END) #define IS_OB_BOOT1(BOOT1) (((BOOT1) == OB_BOOT1_RESET) || ((BOOT1) == OB_BOOT1_SET)) #endif /* FLASH_BANK2_END */ /* Low Density */ #if (defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6)) #define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)- 1 <= 0x08007FFFU) : \ ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)- 1 <= 0x08003FFFU)) #endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */ /* Medium Density */ #if (defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB)) #define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0801FFFFU) : \ (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x40U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0800FFFFU) : \ (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08007FFFU) : \ ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x08003FFFU)))) #endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB*/ /* High Density */ #if (defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE)) #define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x200U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0807FFFFU) : \ (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x180U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0805FFFFU) : \ ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0803FFFFU))) #endif /* STM32F100xE || STM32F101xE || STM32F103xE */ /* XL Density */ #if defined(FLASH_BANK2_END) #define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x400U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x080FFFFFU) : \ ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x080BFFFFU)) #endif /* FLASH_BANK2_END */ /* Connectivity Line */ #if (defined(STM32F105xC) || defined(STM32F107xC)) #define IS_FLASH_NB_PAGES(ADDRESS,NBPAGES) (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x100U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0803FFFFU) : \ (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0801FFFFU) : \ ((ADDRESS)+((NBPAGES)*FLASH_PAGE_SIZE)-1 <= 0x0800FFFFU))) #endif /* STM32F105xC || STM32F107xC */ #define IS_OB_WRP(PAGE) (((PAGE) != 0x0000000U)) #if defined(FLASH_BANK2_END) #define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1) || \ ((BANK) == FLASH_BANK_2) || \ ((BANK) == FLASH_BANK_BOTH)) #else #define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1)) #endif /* FLASH_BANK2_END */ /* Low Density */ #if (defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6)) #define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? \ ((ADDRESS) <= FLASH_BANK1_END) : ((ADDRESS) <= 0x08003FFFU))) #endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */ /* Medium Density */ #if (defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB)) #define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? \ ((ADDRESS) <= FLASH_BANK1_END) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x40U) ? \ ((ADDRESS) <= 0x0800FFFF) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x20U) ? \ ((ADDRESS) <= 0x08007FFF) : ((ADDRESS) <= 0x08003FFFU))))) #endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB*/ /* High Density */ #if (defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE)) #define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x200U) ? \ ((ADDRESS) <= FLASH_BANK1_END) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x180U) ? \ ((ADDRESS) <= 0x0805FFFFU) : ((ADDRESS) <= 0x0803FFFFU)))) #endif /* STM32F100xE || STM32F101xE || STM32F103xE */ /* XL Density */ #if defined(FLASH_BANK2_END) #define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x400U) ? \ ((ADDRESS) <= FLASH_BANK2_END) : ((ADDRESS) <= 0x080BFFFFU))) #endif /* FLASH_BANK2_END */ /* Connectivity Line */ #if (defined(STM32F105xC) || defined(STM32F107xC)) #define IS_FLASH_PROGRAM_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x100U) ? \ ((ADDRESS) <= FLASH_BANK1_END) : (((*((uint16_t *)FLASH_SIZE_DATA_REGISTER)) == 0x80U) ? \ ((ADDRESS) <= 0x0801FFFFU) : ((ADDRESS) <= 0x0800FFFFU)))) #endif /* STM32F105xC || STM32F107xC */ /** * @} */ /* Exported types ------------------------------------------------------------*/ /** @defgroup FLASHEx_Exported_Types FLASHEx Exported Types * @{ */ /** * @brief FLASH Erase structure definition */ typedef struct { uint32_t TypeErase; /*!< TypeErase: Mass erase or page erase. This parameter can be a value of @ref FLASHEx_Type_Erase */ uint32_t Banks; /*!< Select banks to erase when Mass erase is enabled. This parameter must be a value of @ref FLASHEx_Banks */ uint32_t PageAddress; /*!< PageAdress: Initial FLASH page address to erase when mass erase is disabled This parameter must be a number between Min_Data = 0x08000000 and Max_Data = FLASH_BANKx_END (x = 1 or 2 depending on devices)*/ uint32_t NbPages; /*!< NbPages: Number of pagess to be erased. This parameter must be a value between Min_Data = 1 and Max_Data = (max number of pages - value of initial page)*/ } FLASH_EraseInitTypeDef; /** * @brief FLASH Options bytes program structure definition */ typedef struct { uint32_t OptionType; /*!< OptionType: Option byte to be configured. This parameter can be a value of @ref FLASHEx_OB_Type */ uint32_t WRPState; /*!< WRPState: Write protection activation or deactivation. This parameter can be a value of @ref FLASHEx_OB_WRP_State */ uint32_t WRPPage; /*!< WRPPage: specifies the page(s) to be write protected This parameter can be a value of @ref FLASHEx_OB_Write_Protection */ uint32_t Banks; /*!< Select banks for WRP activation/deactivation of all sectors. This parameter must be a value of @ref FLASHEx_Banks */ uint8_t RDPLevel; /*!< RDPLevel: Set the read protection level.. This parameter can be a value of @ref FLASHEx_OB_Read_Protection */ #if defined(FLASH_BANK2_END) uint8_t USERConfig; /*!< USERConfig: Program the FLASH User Option Byte: IWDG / STOP / STDBY / BOOT1 This parameter can be a combination of @ref FLASHEx_OB_IWatchdog, @ref FLASHEx_OB_nRST_STOP, @ref FLASHEx_OB_nRST_STDBY, @ref FLASHEx_OB_BOOT1 */ #else uint8_t USERConfig; /*!< USERConfig: Program the FLASH User Option Byte: IWDG / STOP / STDBY This parameter can be a combination of @ref FLASHEx_OB_IWatchdog, @ref FLASHEx_OB_nRST_STOP, @ref FLASHEx_OB_nRST_STDBY */ #endif /* FLASH_BANK2_END */ uint32_t DATAAddress; /*!< DATAAddress: Address of the option byte DATA to be programmed This parameter can be a value of @ref FLASHEx_OB_Data_Address */ uint8_t DATAData; /*!< DATAData: Data to be stored in the option byte DATA This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF */ } FLASH_OBProgramInitTypeDef; /** * @} */ /* Exported constants --------------------------------------------------------*/ /** @defgroup FLASHEx_Exported_Constants FLASHEx Exported Constants * @{ */ /** @defgroup FLASHEx_Constants FLASH Constants * @{ */ /** @defgroup FLASHEx_Page_Size Page Size * @{ */ #if (defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6) || defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB)) #define FLASH_PAGE_SIZE 0x400U #endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */ /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */ #if (defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)) #define FLASH_PAGE_SIZE 0x800U #endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */ /* STM32F101xG || STM32F103xG */ /* STM32F105xC || STM32F107xC */ /** * @} */ /** @defgroup FLASHEx_Type_Erase Type Erase * @{ */ #define FLASH_TYPEERASE_PAGES 0x00U /*!<Pages erase only*/ #define FLASH_TYPEERASE_MASSERASE 0x02U /*!<Flash mass erase activation*/ /** * @} */ /** @defgroup FLASHEx_Banks Banks * @{ */ #if defined(FLASH_BANK2_END) #define FLASH_BANK_1 1U /*!< Bank 1 */ #define FLASH_BANK_2 2U /*!< Bank 2 */ #define FLASH_BANK_BOTH ((uint32_t)FLASH_BANK_1 | FLASH_BANK_2) /*!< Bank1 and Bank2 */ #else #define FLASH_BANK_1 1U /*!< Bank 1 */ #endif /** * @} */ /** * @} */ /** @defgroup FLASHEx_OptionByte_Constants Option Byte Constants * @{ */ /** @defgroup FLASHEx_OB_Type Option Bytes Type * @{ */ #define OPTIONBYTE_WRP 0x01U /*!<WRP option byte configuration*/ #define OPTIONBYTE_RDP 0x02U /*!<RDP option byte configuration*/ #define OPTIONBYTE_USER 0x04U /*!<USER option byte configuration*/ #define OPTIONBYTE_DATA 0x08U /*!<DATA option byte configuration*/ /** * @} */ /** @defgroup FLASHEx_OB_WRP_State Option Byte WRP State * @{ */ #define OB_WRPSTATE_DISABLE 0x00U /*!<Disable the write protection of the desired pages*/ #define OB_WRPSTATE_ENABLE 0x01U /*!<Enable the write protection of the desired pagess*/ /** * @} */ /** @defgroup FLASHEx_OB_Write_Protection Option Bytes Write Protection * @{ */ /* STM32 Low and Medium density devices */ #if defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6) \ || defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) \ || defined(STM32F103xB) #define OB_WRP_PAGES0TO3 0x00000001U /*!< Write protection of page 0 to 3 */ #define OB_WRP_PAGES4TO7 0x00000002U /*!< Write protection of page 4 to 7 */ #define OB_WRP_PAGES8TO11 0x00000004U /*!< Write protection of page 8 to 11 */ #define OB_WRP_PAGES12TO15 0x00000008U /*!< Write protection of page 12 to 15 */ #define OB_WRP_PAGES16TO19 0x00000010U /*!< Write protection of page 16 to 19 */ #define OB_WRP_PAGES20TO23 0x00000020U /*!< Write protection of page 20 to 23 */ #define OB_WRP_PAGES24TO27 0x00000040U /*!< Write protection of page 24 to 27 */ #define OB_WRP_PAGES28TO31 0x00000080U /*!< Write protection of page 28 to 31 */ #endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */ /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */ /* STM32 Medium-density devices */ #if defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB) #define OB_WRP_PAGES32TO35 0x00000100U /*!< Write protection of page 32 to 35 */ #define OB_WRP_PAGES36TO39 0x00000200U /*!< Write protection of page 36 to 39 */ #define OB_WRP_PAGES40TO43 0x00000400U /*!< Write protection of page 40 to 43 */ #define OB_WRP_PAGES44TO47 0x00000800U /*!< Write protection of page 44 to 47 */ #define OB_WRP_PAGES48TO51 0x00001000U /*!< Write protection of page 48 to 51 */ #define OB_WRP_PAGES52TO55 0x00002000U /*!< Write protection of page 52 to 55 */ #define OB_WRP_PAGES56TO59 0x00004000U /*!< Write protection of page 56 to 59 */ #define OB_WRP_PAGES60TO63 0x00008000U /*!< Write protection of page 60 to 63 */ #define OB_WRP_PAGES64TO67 0x00010000U /*!< Write protection of page 64 to 67 */ #define OB_WRP_PAGES68TO71 0x00020000U /*!< Write protection of page 68 to 71 */ #define OB_WRP_PAGES72TO75 0x00040000U /*!< Write protection of page 72 to 75 */ #define OB_WRP_PAGES76TO79 0x00080000U /*!< Write protection of page 76 to 79 */ #define OB_WRP_PAGES80TO83 0x00100000U /*!< Write protection of page 80 to 83 */ #define OB_WRP_PAGES84TO87 0x00200000U /*!< Write protection of page 84 to 87 */ #define OB_WRP_PAGES88TO91 0x00400000U /*!< Write protection of page 88 to 91 */ #define OB_WRP_PAGES92TO95 0x00800000U /*!< Write protection of page 92 to 95 */ #define OB_WRP_PAGES96TO99 0x01000000U /*!< Write protection of page 96 to 99 */ #define OB_WRP_PAGES100TO103 0x02000000U /*!< Write protection of page 100 to 103 */ #define OB_WRP_PAGES104TO107 0x04000000U /*!< Write protection of page 104 to 107 */ #define OB_WRP_PAGES108TO111 0x08000000U /*!< Write protection of page 108 to 111 */ #define OB_WRP_PAGES112TO115 0x10000000U /*!< Write protection of page 112 to 115 */ #define OB_WRP_PAGES116TO119 0x20000000U /*!< Write protection of page 115 to 119 */ #define OB_WRP_PAGES120TO123 0x40000000U /*!< Write protection of page 120 to 123 */ #define OB_WRP_PAGES124TO127 0x80000000U /*!< Write protection of page 124 to 127 */ #endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */ /* STM32 High-density, XL-density and Connectivity line devices */ #if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE) \ || defined(STM32F101xG) || defined(STM32F103xG) \ || defined(STM32F105xC) || defined(STM32F107xC) #define OB_WRP_PAGES0TO1 0x00000001U /*!< Write protection of page 0 TO 1 */ #define OB_WRP_PAGES2TO3 0x00000002U /*!< Write protection of page 2 TO 3 */ #define OB_WRP_PAGES4TO5 0x00000004U /*!< Write protection of page 4 TO 5 */ #define OB_WRP_PAGES6TO7 0x00000008U /*!< Write protection of page 6 TO 7 */ #define OB_WRP_PAGES8TO9 0x00000010U /*!< Write protection of page 8 TO 9 */ #define OB_WRP_PAGES10TO11 0x00000020U /*!< Write protection of page 10 TO 11 */ #define OB_WRP_PAGES12TO13 0x00000040U /*!< Write protection of page 12 TO 13 */ #define OB_WRP_PAGES14TO15 0x00000080U /*!< Write protection of page 14 TO 15 */ #define OB_WRP_PAGES16TO17 0x00000100U /*!< Write protection of page 16 TO 17 */ #define OB_WRP_PAGES18TO19 0x00000200U /*!< Write protection of page 18 TO 19 */ #define OB_WRP_PAGES20TO21 0x00000400U /*!< Write protection of page 20 TO 21 */ #define OB_WRP_PAGES22TO23 0x00000800U /*!< Write protection of page 22 TO 23 */ #define OB_WRP_PAGES24TO25 0x00001000U /*!< Write protection of page 24 TO 25 */ #define OB_WRP_PAGES26TO27 0x00002000U /*!< Write protection of page 26 TO 27 */ #define OB_WRP_PAGES28TO29 0x00004000U /*!< Write protection of page 28 TO 29 */ #define OB_WRP_PAGES30TO31 0x00008000U /*!< Write protection of page 30 TO 31 */ #define OB_WRP_PAGES32TO33 0x00010000U /*!< Write protection of page 32 TO 33 */ #define OB_WRP_PAGES34TO35 0x00020000U /*!< Write protection of page 34 TO 35 */ #define OB_WRP_PAGES36TO37 0x00040000U /*!< Write protection of page 36 TO 37 */ #define OB_WRP_PAGES38TO39 0x00080000U /*!< Write protection of page 38 TO 39 */ #define OB_WRP_PAGES40TO41 0x00100000U /*!< Write protection of page 40 TO 41 */ #define OB_WRP_PAGES42TO43 0x00200000U /*!< Write protection of page 42 TO 43 */ #define OB_WRP_PAGES44TO45 0x00400000U /*!< Write protection of page 44 TO 45 */ #define OB_WRP_PAGES46TO47 0x00800000U /*!< Write protection of page 46 TO 47 */ #define OB_WRP_PAGES48TO49 0x01000000U /*!< Write protection of page 48 TO 49 */ #define OB_WRP_PAGES50TO51 0x02000000U /*!< Write protection of page 50 TO 51 */ #define OB_WRP_PAGES52TO53 0x04000000U /*!< Write protection of page 52 TO 53 */ #define OB_WRP_PAGES54TO55 0x08000000U /*!< Write protection of page 54 TO 55 */ #define OB_WRP_PAGES56TO57 0x10000000U /*!< Write protection of page 56 TO 57 */ #define OB_WRP_PAGES58TO59 0x20000000U /*!< Write protection of page 58 TO 59 */ #define OB_WRP_PAGES60TO61 0x40000000U /*!< Write protection of page 60 TO 61 */ #define OB_WRP_PAGES62TO127 0x80000000U /*!< Write protection of page 62 TO 127 */ #define OB_WRP_PAGES62TO255 0x80000000U /*!< Write protection of page 62 TO 255 */ #define OB_WRP_PAGES62TO511 0x80000000U /*!< Write protection of page 62 TO 511 */ #endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB */ /* STM32F101xG || STM32F103xG */ /* STM32F105xC || STM32F107xC */ #define OB_WRP_ALLPAGES 0xFFFFFFFFU /*!< Write protection of all Pages */ /* Low Density */ #if defined(STM32F101x6) || defined(STM32F102x6) || defined(STM32F103x6) #define OB_WRP_PAGES0TO31MASK 0x000000FFU #endif /* STM32F101x6 || STM32F102x6 || STM32F103x6 */ /* Medium Density */ #if defined(STM32F100xB) || defined(STM32F101xB) || defined(STM32F102xB) || defined(STM32F103xB) #define OB_WRP_PAGES0TO31MASK 0x000000FFU #define OB_WRP_PAGES32TO63MASK 0x0000FF00U #define OB_WRP_PAGES64TO95MASK 0x00FF0000U #define OB_WRP_PAGES96TO127MASK 0xFF000000U #endif /* STM32F100xB || STM32F101xB || STM32F102xB || STM32F103xB*/ /* High Density */ #if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F103xE) #define OB_WRP_PAGES0TO15MASK 0x000000FFU #define OB_WRP_PAGES16TO31MASK 0x0000FF00U #define OB_WRP_PAGES32TO47MASK 0x00FF0000U #define OB_WRP_PAGES48TO255MASK 0xFF000000U #endif /* STM32F100xE || STM32F101xE || STM32F103xE */ /* XL Density */ #if defined(STM32F101xG) || defined(STM32F103xG) #define OB_WRP_PAGES0TO15MASK 0x000000FFU #define OB_WRP_PAGES16TO31MASK 0x0000FF00U #define OB_WRP_PAGES32TO47MASK 0x00FF0000U #define OB_WRP_PAGES48TO511MASK 0xFF000000U #endif /* STM32F101xG || STM32F103xG */ /* Connectivity line devices */ #if defined(STM32F105xC) || defined(STM32F107xC) #define OB_WRP_PAGES0TO15MASK 0x000000FFU #define OB_WRP_PAGES16TO31MASK 0x0000FF00U #define OB_WRP_PAGES32TO47MASK 0x00FF0000U #define OB_WRP_PAGES48TO127MASK 0xFF000000U #endif /* STM32F105xC || STM32F107xC */ /** * @} */ /** @defgroup FLASHEx_OB_Read_Protection Option Byte Read Protection * @{ */ #define OB_RDP_LEVEL_0 ((uint8_t)0xA5) #define OB_RDP_LEVEL_1 ((uint8_t)0x00) /** * @} */ /** @defgroup FLASHEx_OB_IWatchdog Option Byte IWatchdog * @{ */ #define OB_IWDG_SW ((uint16_t)0x0001) /*!< Software IWDG selected */ #define OB_IWDG_HW ((uint16_t)0x0000) /*!< Hardware IWDG selected */ /** * @} */ /** @defgroup FLASHEx_OB_nRST_STOP Option Byte nRST STOP * @{ */ #define OB_STOP_NO_RST ((uint16_t)0x0002) /*!< No reset generated when entering in STOP */ #define OB_STOP_RST ((uint16_t)0x0000) /*!< Reset generated when entering in STOP */ /** * @} */ /** @defgroup FLASHEx_OB_nRST_STDBY Option Byte nRST STDBY * @{ */ #define OB_STDBY_NO_RST ((uint16_t)0x0004) /*!< No reset generated when entering in STANDBY */ #define OB_STDBY_RST ((uint16_t)0x0000) /*!< Reset generated when entering in STANDBY */ /** * @} */ #if defined(FLASH_BANK2_END) /** @defgroup FLASHEx_OB_BOOT1 Option Byte BOOT1 * @{ */ #define OB_BOOT1_RESET ((uint16_t)0x0000) /*!< BOOT1 Reset */ #define OB_BOOT1_SET ((uint16_t)0x0008) /*!< BOOT1 Set */ /** * @} */ #endif /* FLASH_BANK2_END */ /** @defgroup FLASHEx_OB_Data_Address Option Byte Data Address * @{ */ #define OB_DATA_ADDRESS_DATA0 0x1FFFF804U #define OB_DATA_ADDRESS_DATA1 0x1FFFF806U /** * @} */ /** * @} */ /** @addtogroup FLASHEx_Constants * @{ */ /** @defgroup FLASH_Flag_definition Flag definition * @brief Flag definition * @{ */ #if defined(FLASH_BANK2_END) #define FLASH_FLAG_BSY FLASH_FLAG_BSY_BANK1 /*!< FLASH Bank1 Busy flag */ #define FLASH_FLAG_PGERR FLASH_FLAG_PGERR_BANK1 /*!< FLASH Bank1 Programming error flag */ #define FLASH_FLAG_WRPERR FLASH_FLAG_WRPERR_BANK1 /*!< FLASH Bank1 Write protected error flag */ #define FLASH_FLAG_EOP FLASH_FLAG_EOP_BANK1 /*!< FLASH Bank1 End of Operation flag */ #define FLASH_FLAG_BSY_BANK1 FLASH_SR_BSY /*!< FLASH Bank1 Busy flag */ #define FLASH_FLAG_PGERR_BANK1 FLASH_SR_PGERR /*!< FLASH Bank1 Programming error flag */ #define FLASH_FLAG_WRPERR_BANK1 FLASH_SR_WRPRTERR /*!< FLASH Bank1 Write protected error flag */ #define FLASH_FLAG_EOP_BANK1 FLASH_SR_EOP /*!< FLASH Bank1 End of Operation flag */ #define FLASH_FLAG_BSY_BANK2 (FLASH_SR2_BSY << 16U) /*!< FLASH Bank2 Busy flag */ #define FLASH_FLAG_PGERR_BANK2 (FLASH_SR2_PGERR << 16U) /*!< FLASH Bank2 Programming error flag */ #define FLASH_FLAG_WRPERR_BANK2 (FLASH_SR2_WRPRTERR << 16U) /*!< FLASH Bank2 Write protected error flag */ #define FLASH_FLAG_EOP_BANK2 (FLASH_SR2_EOP << 16U) /*!< FLASH Bank2 End of Operation flag */ #else #define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */ #define FLASH_FLAG_PGERR FLASH_SR_PGERR /*!< FLASH Programming error flag */ #define FLASH_FLAG_WRPERR FLASH_SR_WRPRTERR /*!< FLASH Write protected error flag */ #define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */ #endif #define FLASH_FLAG_OPTVERR ((OBR_REG_INDEX << 8U | FLASH_OBR_OPTERR)) /*!< Option Byte Error */ /** * @} */ /** @defgroup FLASH_Interrupt_definition Interrupt definition * @brief FLASH Interrupt definition * @{ */ #if defined(FLASH_BANK2_END) #define FLASH_IT_EOP FLASH_IT_EOP_BANK1 /*!< End of FLASH Operation Interrupt source Bank1 */ #define FLASH_IT_ERR FLASH_IT_ERR_BANK1 /*!< Error Interrupt source Bank1 */ #define FLASH_IT_EOP_BANK1 FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source Bank1 */ #define FLASH_IT_ERR_BANK1 FLASH_CR_ERRIE /*!< Error Interrupt source Bank1 */ #define FLASH_IT_EOP_BANK2 (FLASH_CR2_EOPIE << 16U) /*!< End of FLASH Operation Interrupt source Bank2 */ #define FLASH_IT_ERR_BANK2 (FLASH_CR2_ERRIE << 16U) /*!< Error Interrupt source Bank2 */ #else #define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */ #define FLASH_IT_ERR FLASH_CR_ERRIE /*!< Error Interrupt source */ #endif /** * @} */ /** * @} */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /** @defgroup FLASHEx_Exported_Macros FLASHEx Exported Macros * @{ */ /** @defgroup FLASH_Interrupt Interrupt * @brief macros to handle FLASH interrupts * @{ */ #if defined(FLASH_BANK2_END) /** * @brief Enable the specified FLASH interrupt. * @param __INTERRUPT__ FLASH interrupt * This parameter can be any combination of the following values: * @arg @ref FLASH_IT_EOP_BANK1 End of FLASH Operation Interrupt on bank1 * @arg @ref FLASH_IT_ERR_BANK1 Error Interrupt on bank1 * @arg @ref FLASH_IT_EOP_BANK2 End of FLASH Operation Interrupt on bank2 * @arg @ref FLASH_IT_ERR_BANK2 Error Interrupt on bank2 * @retval none */ #define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) do { \ /* Enable Bank1 IT */ \ SET_BIT(FLASH->CR, ((__INTERRUPT__) & 0x0000FFFFU)); \ /* Enable Bank2 IT */ \ SET_BIT(FLASH->CR2, ((__INTERRUPT__) >> 16U)); \ } while(0U) /** * @brief Disable the specified FLASH interrupt. * @param __INTERRUPT__ FLASH interrupt * This parameter can be any combination of the following values: * @arg @ref FLASH_IT_EOP_BANK1 End of FLASH Operation Interrupt on bank1 * @arg @ref FLASH_IT_ERR_BANK1 Error Interrupt on bank1 * @arg @ref FLASH_IT_EOP_BANK2 End of FLASH Operation Interrupt on bank2 * @arg @ref FLASH_IT_ERR_BANK2 Error Interrupt on bank2 * @retval none */ #define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) do { \ /* Disable Bank1 IT */ \ CLEAR_BIT(FLASH->CR, ((__INTERRUPT__) & 0x0000FFFFU)); \ /* Disable Bank2 IT */ \ CLEAR_BIT(FLASH->CR2, ((__INTERRUPT__) >> 16U)); \ } while(0U) /** * @brief Get the specified FLASH flag status. * @param __FLAG__ specifies the FLASH flag to check. * This parameter can be one of the following values: * @arg @ref FLASH_FLAG_EOP_BANK1 FLASH End of Operation flag on bank1 * @arg @ref FLASH_FLAG_WRPERR_BANK1 FLASH Write protected error flag on bank1 * @arg @ref FLASH_FLAG_PGERR_BANK1 FLASH Programming error flag on bank1 * @arg @ref FLASH_FLAG_BSY_BANK1 FLASH Busy flag on bank1 * @arg @ref FLASH_FLAG_EOP_BANK2 FLASH End of Operation flag on bank2 * @arg @ref FLASH_FLAG_WRPERR_BANK2 FLASH Write protected error flag on bank2 * @arg @ref FLASH_FLAG_PGERR_BANK2 FLASH Programming error flag on bank2 * @arg @ref FLASH_FLAG_BSY_BANK2 FLASH Busy flag on bank2 * @arg @ref FLASH_FLAG_OPTVERR Loaded OB and its complement do not match * @retval The new state of __FLAG__ (SET or RESET). */ #define __HAL_FLASH_GET_FLAG(__FLAG__) (((__FLAG__) == FLASH_FLAG_OPTVERR) ? \ (FLASH->OBR & FLASH_OBR_OPTERR) : \ ((((__FLAG__) & SR_FLAG_MASK) != RESET)? \ (FLASH->SR & ((__FLAG__) & SR_FLAG_MASK)) : \ (FLASH->SR2 & ((__FLAG__) >> 16U)))) /** * @brief Clear the specified FLASH flag. * @param __FLAG__ specifies the FLASH flags to clear. * This parameter can be any combination of the following values: * @arg @ref FLASH_FLAG_EOP_BANK1 FLASH End of Operation flag on bank1 * @arg @ref FLASH_FLAG_WRPERR_BANK1 FLASH Write protected error flag on bank1 * @arg @ref FLASH_FLAG_PGERR_BANK1 FLASH Programming error flag on bank1 * @arg @ref FLASH_FLAG_BSY_BANK1 FLASH Busy flag on bank1 * @arg @ref FLASH_FLAG_EOP_BANK2 FLASH End of Operation flag on bank2 * @arg @ref FLASH_FLAG_WRPERR_BANK2 FLASH Write protected error flag on bank2 * @arg @ref FLASH_FLAG_PGERR_BANK2 FLASH Programming error flag on bank2 * @arg @ref FLASH_FLAG_BSY_BANK2 FLASH Busy flag on bank2 * @arg @ref FLASH_FLAG_OPTVERR Loaded OB and its complement do not match * @retval none */ #define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { \ /* Clear FLASH_FLAG_OPTVERR flag */ \ if ((__FLAG__) == FLASH_FLAG_OPTVERR) \ { \ CLEAR_BIT(FLASH->OBR, FLASH_OBR_OPTERR); \ } \ else { \ /* Clear Flag in Bank1 */ \ if (((__FLAG__) & SR_FLAG_MASK) != RESET) \ { \ FLASH->SR = ((__FLAG__) & SR_FLAG_MASK); \ } \ /* Clear Flag in Bank2 */ \ if (((__FLAG__) >> 16U) != RESET) \ { \ FLASH->SR2 = ((__FLAG__) >> 16U); \ } \ } \ } while(0U) #else /** * @brief Enable the specified FLASH interrupt. * @param __INTERRUPT__ FLASH interrupt * This parameter can be any combination of the following values: * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt * @arg @ref FLASH_IT_ERR Error Interrupt * @retval none */ #define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__)) /** * @brief Disable the specified FLASH interrupt. * @param __INTERRUPT__ FLASH interrupt * This parameter can be any combination of the following values: * @arg @ref FLASH_IT_EOP End of FLASH Operation Interrupt * @arg @ref FLASH_IT_ERR Error Interrupt * @retval none */ #define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(__INTERRUPT__)) /** * @brief Get the specified FLASH flag status. * @param __FLAG__ specifies the FLASH flag to check. * This parameter can be one of the following values: * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag * @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag * @arg @ref FLASH_FLAG_PGERR FLASH Programming error flag * @arg @ref FLASH_FLAG_BSY FLASH Busy flag * @arg @ref FLASH_FLAG_OPTVERR Loaded OB and its complement do not match * @retval The new state of __FLAG__ (SET or RESET). */ #define __HAL_FLASH_GET_FLAG(__FLAG__) (((__FLAG__) == FLASH_FLAG_OPTVERR) ? \ (FLASH->OBR & FLASH_OBR_OPTERR) : \ (FLASH->SR & (__FLAG__))) /** * @brief Clear the specified FLASH flag. * @param __FLAG__ specifies the FLASH flags to clear. * This parameter can be any combination of the following values: * @arg @ref FLASH_FLAG_EOP FLASH End of Operation flag * @arg @ref FLASH_FLAG_WRPERR FLASH Write protected error flag * @arg @ref FLASH_FLAG_PGERR FLASH Programming error flag * @arg @ref FLASH_FLAG_OPTVERR Loaded OB and its complement do not match * @retval none */ #define __HAL_FLASH_CLEAR_FLAG(__FLAG__) do { \ /* Clear FLASH_FLAG_OPTVERR flag */ \ if ((__FLAG__) == FLASH_FLAG_OPTVERR) \ { \ CLEAR_BIT(FLASH->OBR, FLASH_OBR_OPTERR); \ } \ else { \ /* Clear Flag in Bank1 */ \ FLASH->SR = (__FLAG__); \ } \ } while(0U) #endif /** * @} */ /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @addtogroup FLASHEx_Exported_Functions * @{ */ /** @addtogroup FLASHEx_Exported_Functions_Group1 * @{ */ /* IO operation functions *****************************************************/ HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *PageError); HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit); /** * @} */ /** @addtogroup FLASHEx_Exported_Functions_Group2 * @{ */ /* Peripheral Control functions ***********************************************/ HAL_StatusTypeDef HAL_FLASHEx_OBErase(void); HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit); void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit); uint32_t HAL_FLASHEx_OBGetUserData(uint32_t DATAAdress); /** * @} */ /** * @} */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F1xx_HAL_FLASH_EX_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/