/* ---------------------------------------------------------------------------- */
/*                  Atmel Microcontroller Software Support                      */
/*                       SAM Software Package License                           */
/* ---------------------------------------------------------------------------- */
/* Copyright (c) %copyright_year%, Atmel Corporation                                        */
/*                                                                              */
/* All rights reserved.                                                         */
/*                                                                              */
/* Redistribution and use in source and binary forms, with or without           */
/* modification, are permitted provided that the following condition is met:    */
/*                                                                              */
/* - Redistributions of source code must retain the above copyright notice,     */
/* this list of conditions and the disclaimer below.                            */
/*                                                                              */
/* Atmel's name may not be used to endorse or promote products derived from     */
/* this software without specific prior written permission.                     */
/*                                                                              */
/* DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR   */
/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE   */
/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,      */
/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,  */
/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    */
/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING         */
/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                           */
/* ---------------------------------------------------------------------------- */

#ifndef _SAM4S_PIOA_INSTANCE_
#define _SAM4S_PIOA_INSTANCE_

/* ========== Register definition for PIOA peripheral ========== */
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
  #define REG_PIOA_PER                      (0x400E0E00U) /**< \brief (PIOA) PIO Enable Register */
  #define REG_PIOA_PDR                      (0x400E0E04U) /**< \brief (PIOA) PIO Disable Register */
  #define REG_PIOA_PSR                      (0x400E0E08U) /**< \brief (PIOA) PIO Status Register */
  #define REG_PIOA_OER                      (0x400E0E10U) /**< \brief (PIOA) Output Enable Register */
  #define REG_PIOA_ODR                      (0x400E0E14U) /**< \brief (PIOA) Output Disable Register */
  #define REG_PIOA_OSR                      (0x400E0E18U) /**< \brief (PIOA) Output Status Register */
  #define REG_PIOA_IFER                     (0x400E0E20U) /**< \brief (PIOA) Glitch Input Filter Enable Register */
  #define REG_PIOA_IFDR                     (0x400E0E24U) /**< \brief (PIOA) Glitch Input Filter Disable Register */
  #define REG_PIOA_IFSR                     (0x400E0E28U) /**< \brief (PIOA) Glitch Input Filter Status Register */
  #define REG_PIOA_SODR                     (0x400E0E30U) /**< \brief (PIOA) Set Output Data Register */
  #define REG_PIOA_CODR                     (0x400E0E34U) /**< \brief (PIOA) Clear Output Data Register */
  #define REG_PIOA_ODSR                     (0x400E0E38U) /**< \brief (PIOA) Output Data Status Register */
  #define REG_PIOA_PDSR                     (0x400E0E3CU) /**< \brief (PIOA) Pin Data Status Register */
  #define REG_PIOA_IER                      (0x400E0E40U) /**< \brief (PIOA) Interrupt Enable Register */
  #define REG_PIOA_IDR                      (0x400E0E44U) /**< \brief (PIOA) Interrupt Disable Register */
  #define REG_PIOA_IMR                      (0x400E0E48U) /**< \brief (PIOA) Interrupt Mask Register */
  #define REG_PIOA_ISR                      (0x400E0E4CU) /**< \brief (PIOA) Interrupt Status Register */
  #define REG_PIOA_MDER                     (0x400E0E50U) /**< \brief (PIOA) Multi-driver Enable Register */
  #define REG_PIOA_MDDR                     (0x400E0E54U) /**< \brief (PIOA) Multi-driver Disable Register */
  #define REG_PIOA_MDSR                     (0x400E0E58U) /**< \brief (PIOA) Multi-driver Status Register */
  #define REG_PIOA_PUDR                     (0x400E0E60U) /**< \brief (PIOA) Pull-up Disable Register */
  #define REG_PIOA_PUER                     (0x400E0E64U) /**< \brief (PIOA) Pull-up Enable Register */
  #define REG_PIOA_PUSR                     (0x400E0E68U) /**< \brief (PIOA) Pad Pull-up Status Register */
  #define REG_PIOA_ABCDSR                   (0x400E0E70U) /**< \brief (PIOA) Peripheral Select Register */
  #define REG_PIOA_IFSCDR                   (0x400E0E80U) /**< \brief (PIOA) Input Filter Slow Clock Disable Register */
  #define REG_PIOA_IFSCER                   (0x400E0E84U) /**< \brief (PIOA) Input Filter Slow Clock Enable Register */
  #define REG_PIOA_IFSCSR                   (0x400E0E88U) /**< \brief (PIOA) Input Filter Slow Clock Status Register */
  #define REG_PIOA_SCDR                     (0x400E0E8CU) /**< \brief (PIOA) Slow Clock Divider Debouncing Register */
  #define REG_PIOA_PPDDR                    (0x400E0E90U) /**< \brief (PIOA) Pad Pull-down Disable Register */
  #define REG_PIOA_PPDER                    (0x400E0E94U) /**< \brief (PIOA) Pad Pull-down Enable Register */
  #define REG_PIOA_PPDSR                    (0x400E0E98U) /**< \brief (PIOA) Pad Pull-down Status Register */
  #define REG_PIOA_OWER                     (0x400E0EA0U) /**< \brief (PIOA) Output Write Enable */
  #define REG_PIOA_OWDR                     (0x400E0EA4U) /**< \brief (PIOA) Output Write Disable */
  #define REG_PIOA_OWSR                     (0x400E0EA8U) /**< \brief (PIOA) Output Write Status Register */
  #define REG_PIOA_AIMER                    (0x400E0EB0U) /**< \brief (PIOA) Additional Interrupt Modes Enable Register */
  #define REG_PIOA_AIMDR                    (0x400E0EB4U) /**< \brief (PIOA) Additional Interrupt Modes Disable Register */
  #define REG_PIOA_AIMMR                    (0x400E0EB8U) /**< \brief (PIOA) Additional Interrupt Modes Mask Register */
  #define REG_PIOA_ESR                      (0x400E0EC0U) /**< \brief (PIOA) Edge Select Register */
  #define REG_PIOA_LSR                      (0x400E0EC4U) /**< \brief (PIOA) Level Select Register */
  #define REG_PIOA_ELSR                     (0x400E0EC8U) /**< \brief (PIOA) Edge/Level Status Register */
  #define REG_PIOA_FELLSR                   (0x400E0ED0U) /**< \brief (PIOA) Falling Edge/Low-Level Select Register */
  #define REG_PIOA_REHLSR                   (0x400E0ED4U) /**< \brief (PIOA) Rising Edge/High-Level Select Register */
  #define REG_PIOA_FRLHSR                   (0x400E0ED8U) /**< \brief (PIOA) Fall/Rise - Low/High Status Register */
  #define REG_PIOA_LOCKSR                   (0x400E0EE0U) /**< \brief (PIOA) Lock Status */
  #define REG_PIOA_WPMR                     (0x400E0EE4U) /**< \brief (PIOA) Write Protection Mode Register */
  #define REG_PIOA_WPSR                     (0x400E0EE8U) /**< \brief (PIOA) Write Protection Status Register */
  #define REG_PIOA_SCHMITT                  (0x400E0F00U) /**< \brief (PIOA) Schmitt Trigger Register */
  #define REG_PIOA_PCMR                     (0x400E0F50U) /**< \brief (PIOA) Parallel Capture Mode Register */
  #define REG_PIOA_PCIER                    (0x400E0F54U) /**< \brief (PIOA) Parallel Capture Interrupt Enable Register */
  #define REG_PIOA_PCIDR                    (0x400E0F58U) /**< \brief (PIOA) Parallel Capture Interrupt Disable Register */
  #define REG_PIOA_PCIMR                    (0x400E0F5CU) /**< \brief (PIOA) Parallel Capture Interrupt Mask Register */
  #define REG_PIOA_PCISR                    (0x400E0F60U) /**< \brief (PIOA) Parallel Capture Interrupt Status Register */
  #define REG_PIOA_PCRHR                    (0x400E0F64U) /**< \brief (PIOA) Parallel Capture Reception Holding Register */
  #define REG_PIOA_RPR                      (0x400E0F68U) /**< \brief (PIOA) Receive Pointer Register */
  #define REG_PIOA_RCR                      (0x400E0F6CU) /**< \brief (PIOA) Receive Counter Register */
  #define REG_PIOA_RNPR                     (0x400E0F78U) /**< \brief (PIOA) Receive Next Pointer Register */
  #define REG_PIOA_RNCR                     (0x400E0F7CU) /**< \brief (PIOA) Receive Next Counter Register */
  #define REG_PIOA_PTCR                     (0x400E0F88U) /**< \brief (PIOA) Transfer Control Register */
  #define REG_PIOA_PTSR                     (0x400E0F8CU) /**< \brief (PIOA) Transfer Status Register */
#else
  #define REG_PIOA_PER     (*(__O  uint32_t*)0x400E0E00U) /**< \brief (PIOA) PIO Enable Register */
  #define REG_PIOA_PDR     (*(__O  uint32_t*)0x400E0E04U) /**< \brief (PIOA) PIO Disable Register */
  #define REG_PIOA_PSR     (*(__I  uint32_t*)0x400E0E08U) /**< \brief (PIOA) PIO Status Register */
  #define REG_PIOA_OER     (*(__O  uint32_t*)0x400E0E10U) /**< \brief (PIOA) Output Enable Register */
  #define REG_PIOA_ODR     (*(__O  uint32_t*)0x400E0E14U) /**< \brief (PIOA) Output Disable Register */
  #define REG_PIOA_OSR     (*(__I  uint32_t*)0x400E0E18U) /**< \brief (PIOA) Output Status Register */
  #define REG_PIOA_IFER    (*(__O  uint32_t*)0x400E0E20U) /**< \brief (PIOA) Glitch Input Filter Enable Register */
  #define REG_PIOA_IFDR    (*(__O  uint32_t*)0x400E0E24U) /**< \brief (PIOA) Glitch Input Filter Disable Register */
  #define REG_PIOA_IFSR    (*(__I  uint32_t*)0x400E0E28U) /**< \brief (PIOA) Glitch Input Filter Status Register */
  #define REG_PIOA_SODR    (*(__O  uint32_t*)0x400E0E30U) /**< \brief (PIOA) Set Output Data Register */
  #define REG_PIOA_CODR    (*(__O  uint32_t*)0x400E0E34U) /**< \brief (PIOA) Clear Output Data Register */
  #define REG_PIOA_ODSR    (*(__IO uint32_t*)0x400E0E38U) /**< \brief (PIOA) Output Data Status Register */
  #define REG_PIOA_PDSR    (*(__I  uint32_t*)0x400E0E3CU) /**< \brief (PIOA) Pin Data Status Register */
  #define REG_PIOA_IER     (*(__O  uint32_t*)0x400E0E40U) /**< \brief (PIOA) Interrupt Enable Register */
  #define REG_PIOA_IDR     (*(__O  uint32_t*)0x400E0E44U) /**< \brief (PIOA) Interrupt Disable Register */
  #define REG_PIOA_IMR     (*(__I  uint32_t*)0x400E0E48U) /**< \brief (PIOA) Interrupt Mask Register */
  #define REG_PIOA_ISR     (*(__I  uint32_t*)0x400E0E4CU) /**< \brief (PIOA) Interrupt Status Register */
  #define REG_PIOA_MDER    (*(__O  uint32_t*)0x400E0E50U) /**< \brief (PIOA) Multi-driver Enable Register */
  #define REG_PIOA_MDDR    (*(__O  uint32_t*)0x400E0E54U) /**< \brief (PIOA) Multi-driver Disable Register */
  #define REG_PIOA_MDSR    (*(__I  uint32_t*)0x400E0E58U) /**< \brief (PIOA) Multi-driver Status Register */
  #define REG_PIOA_PUDR    (*(__O  uint32_t*)0x400E0E60U) /**< \brief (PIOA) Pull-up Disable Register */
  #define REG_PIOA_PUER    (*(__O  uint32_t*)0x400E0E64U) /**< \brief (PIOA) Pull-up Enable Register */
  #define REG_PIOA_PUSR    (*(__I  uint32_t*)0x400E0E68U) /**< \brief (PIOA) Pad Pull-up Status Register */
  #define REG_PIOA_ABCDSR  (*(__IO uint32_t*)0x400E0E70U) /**< \brief (PIOA) Peripheral Select Register */
  #define REG_PIOA_IFSCDR  (*(__O  uint32_t*)0x400E0E80U) /**< \brief (PIOA) Input Filter Slow Clock Disable Register */
  #define REG_PIOA_IFSCER  (*(__O  uint32_t*)0x400E0E84U) /**< \brief (PIOA) Input Filter Slow Clock Enable Register */
  #define REG_PIOA_IFSCSR  (*(__I  uint32_t*)0x400E0E88U) /**< \brief (PIOA) Input Filter Slow Clock Status Register */
  #define REG_PIOA_SCDR    (*(__IO uint32_t*)0x400E0E8CU) /**< \brief (PIOA) Slow Clock Divider Debouncing Register */
  #define REG_PIOA_PPDDR   (*(__O  uint32_t*)0x400E0E90U) /**< \brief (PIOA) Pad Pull-down Disable Register */
  #define REG_PIOA_PPDER   (*(__O  uint32_t*)0x400E0E94U) /**< \brief (PIOA) Pad Pull-down Enable Register */
  #define REG_PIOA_PPDSR   (*(__I  uint32_t*)0x400E0E98U) /**< \brief (PIOA) Pad Pull-down Status Register */
  #define REG_PIOA_OWER    (*(__O  uint32_t*)0x400E0EA0U) /**< \brief (PIOA) Output Write Enable */
  #define REG_PIOA_OWDR    (*(__O  uint32_t*)0x400E0EA4U) /**< \brief (PIOA) Output Write Disable */
  #define REG_PIOA_OWSR    (*(__I  uint32_t*)0x400E0EA8U) /**< \brief (PIOA) Output Write Status Register */
  #define REG_PIOA_AIMER   (*(__O  uint32_t*)0x400E0EB0U) /**< \brief (PIOA) Additional Interrupt Modes Enable Register */
  #define REG_PIOA_AIMDR   (*(__O  uint32_t*)0x400E0EB4U) /**< \brief (PIOA) Additional Interrupt Modes Disable Register */
  #define REG_PIOA_AIMMR   (*(__I  uint32_t*)0x400E0EB8U) /**< \brief (PIOA) Additional Interrupt Modes Mask Register */
  #define REG_PIOA_ESR     (*(__O  uint32_t*)0x400E0EC0U) /**< \brief (PIOA) Edge Select Register */
  #define REG_PIOA_LSR     (*(__O  uint32_t*)0x400E0EC4U) /**< \brief (PIOA) Level Select Register */
  #define REG_PIOA_ELSR    (*(__I  uint32_t*)0x400E0EC8U) /**< \brief (PIOA) Edge/Level Status Register */
  #define REG_PIOA_FELLSR  (*(__O  uint32_t*)0x400E0ED0U) /**< \brief (PIOA) Falling Edge/Low-Level Select Register */
  #define REG_PIOA_REHLSR  (*(__O  uint32_t*)0x400E0ED4U) /**< \brief (PIOA) Rising Edge/High-Level Select Register */
  #define REG_PIOA_FRLHSR  (*(__I  uint32_t*)0x400E0ED8U) /**< \brief (PIOA) Fall/Rise - Low/High Status Register */
  #define REG_PIOA_LOCKSR  (*(__I  uint32_t*)0x400E0EE0U) /**< \brief (PIOA) Lock Status */
  #define REG_PIOA_WPMR    (*(__IO uint32_t*)0x400E0EE4U) /**< \brief (PIOA) Write Protection Mode Register */
  #define REG_PIOA_WPSR    (*(__I  uint32_t*)0x400E0EE8U) /**< \brief (PIOA) Write Protection Status Register */
  #define REG_PIOA_SCHMITT (*(__IO uint32_t*)0x400E0F00U) /**< \brief (PIOA) Schmitt Trigger Register */
  #define REG_PIOA_PCMR    (*(__IO uint32_t*)0x400E0F50U) /**< \brief (PIOA) Parallel Capture Mode Register */
  #define REG_PIOA_PCIER   (*(__O  uint32_t*)0x400E0F54U) /**< \brief (PIOA) Parallel Capture Interrupt Enable Register */
  #define REG_PIOA_PCIDR   (*(__O  uint32_t*)0x400E0F58U) /**< \brief (PIOA) Parallel Capture Interrupt Disable Register */
  #define REG_PIOA_PCIMR   (*(__I  uint32_t*)0x400E0F5CU) /**< \brief (PIOA) Parallel Capture Interrupt Mask Register */
  #define REG_PIOA_PCISR   (*(__I  uint32_t*)0x400E0F60U) /**< \brief (PIOA) Parallel Capture Interrupt Status Register */
  #define REG_PIOA_PCRHR   (*(__I  uint32_t*)0x400E0F64U) /**< \brief (PIOA) Parallel Capture Reception Holding Register */
  #define REG_PIOA_RPR     (*(__IO uint32_t*)0x400E0F68U) /**< \brief (PIOA) Receive Pointer Register */
  #define REG_PIOA_RCR     (*(__IO uint32_t*)0x400E0F6CU) /**< \brief (PIOA) Receive Counter Register */
  #define REG_PIOA_RNPR    (*(__IO uint32_t*)0x400E0F78U) /**< \brief (PIOA) Receive Next Pointer Register */
  #define REG_PIOA_RNCR    (*(__IO uint32_t*)0x400E0F7CU) /**< \brief (PIOA) Receive Next Counter Register */
  #define REG_PIOA_PTCR    (*(__O  uint32_t*)0x400E0F88U) /**< \brief (PIOA) Transfer Control Register */
  #define REG_PIOA_PTSR    (*(__I  uint32_t*)0x400E0F8CU) /**< \brief (PIOA) Transfer Status Register */
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */

#endif /* _SAM4S_PIOA_INSTANCE_ */