-
0c43ae1fd4
stm32: Just clean dcache instead of disabling on stm32h7 dfu reboot
Kevin O'Connor
2022-12-16 17:29:45 -0500
-
02b45c91fb
armcm_reset: Flush dcache before rebooting into canboot
Kevin O'Connor
2022-12-16 12:30:22 -0500
-
b0d9cbfb4b
stm32: Fix usb build on stm32g0b0
Kevin O'Connor
2022-12-15 18:42:31 -0500
-
7d1df81e5e
stm32: Fix USB support on stm32g0b1
Kevin O'Connor
2022-12-15 11:44:12 -0500
-
41c7bb818f
test: Add compile test builds for stm32g431, stm32h723, stm32l412
Kevin O'Connor
2022-12-13 12:51:41 -0500
-
ac090d9d52
stm32: Fix stm32l4 build
Kevin O'Connor
2022-12-15 11:14:46 -0500
-
f31540b357
stm32: Minor changes to stm32g0b0 ifdefs
Kevin O'Connor
2022-12-15 10:23:37 -0500
-
e33b41abaa
stm32g0: add stm32g0b0 support
Alex Voinea
2022-12-12 22:14:09 +0100
-
9d668d63a7
stm32: Rework usb_reboot_for_dfu_bootloader() so it works on stm32h723
Kevin O'Connor
2022-12-12 22:54:17 -0500
-
f6199ef613
config: Update generic-bigtreetech-octopus.cfg for f429 and h723 chips
Kevin O'Connor
2022-12-12 21:45:58 -0500
-
fe0fc29616
rp2040: Move watchdog code to new watchdog.c file
Kevin O'Connor
2022-12-14 19:21:25 -0500
-
9b342c65c8
armcm_link: Rename CONFIG_FLASH_START to CONFIG_FLASH_APPLICATION_ADDRESS
Kevin O'Connor
2022-12-14 18:44:07 -0500
-
dc94a35752
lpc176x: Fix lpc176x build
Kevin O'Connor
2022-12-14 14:50:31 -0500
-
d40ebdab06
canbus: Rename canserial_send() to canbus_send()
Kevin O'Connor
2022-12-14 14:25:21 -0500
-
52a6bed24e
canbus: Rename canbus_send() to canhw_send()
Kevin O'Connor
2022-12-14 14:15:14 -0500
-
e16a693b1e
rp2040: Fix copy-paste error in Kconfig comment
Kevin O'Connor
2022-12-14 13:34:15 -0500
-
6ba2c3e1d1
lpc176x: Use "Bootloader offset" prompt in "make menuconfig"
Kevin O'Connor
2022-12-14 13:29:39 -0500
-
347dfa58ea
gcode_arcs: Allow either one of I, J, K to be default-zero on G2/G3 (#5939)
maze
2022-12-14 18:06:11 +0100
-
69f76b3b66
stm32: Apply race fixes to stm32h7_adc.c
Kevin O'Connor
2022-11-25 13:20:16 -0500
-
201f715b55
save_variables: Verify filename path is writeable at startup
Justin Schuh
2022-12-05 15:29:31 -0800
-
ba365aff96
gcode_arcs: No need to import gcode module to access Coord()
Kevin O'Connor
2022-12-11 20:59:02 -0500
-
0c5c87d7c0
gcode_arcs: support XY, XZ and YZ planes
Andrew Mirsky
2022-11-22 23:22:46 -0500
-
c7f323e863
stm32g0: Do not disable SWD by accident
Alex Voinea
2022-12-09 19:09:23 +0100
-
0972561783
stm32g4: Do not disable SWD by accident
Alex Voinea
2022-12-03 15:17:32 +0100
-
516fdae2b7
linux: add 'GPIOI' for linux process (#5926)
BIGTREETECH
2022-12-12 09:07:58 +0800
-
03006f5ca3
config: printer-artillery-sidewinder-x2-2022.cfg
Frank Roth
2022-12-07 17:02:42 +0100
-
336cc92a0a
parsedump: Support running on both python2 and python3
Kevin O'Connor
2022-12-07 14:31:03 -0500
-
a42f615881
stm32: add STM32H723 support
bigtreetech
2022-11-23 11:29:44 +0800
-
50b2e2e67e
lib: update lib/stm32h7 to v1.9.0 for stm32h723
bigtreetech
2022-11-23 11:16:43 +0800
-
c5d56f4438
stm32g4: implement build,usb,can,i2c,spi,serial,adc.
Matt Baker
2022-09-21 21:45:51 -0700
-
9ab367d813
stm32g4: add lib from stm32cubeg4 v1.4.0
Matt Baker
2022-09-21 21:20:16 -0700
-
a1de69e39b
corexz: Multiple steppers per axis on CoreXZ Allowing multiple steppers per axis.
Neko-vecter
2022-11-08 22:00:44 -0500
-
e02b725602
docs: Note the release of v0.11.0
Kevin O'Connor
2022-11-28 21:23:28 -0500
-
817339a4ef
docs: Add a note about hardware independence to Features.md
Kevin O'Connor
2022-11-19 10:12:37 -0500
-
a9495d8e4f
docs: Updates to Features.md
Kevin O'Connor
2022-11-28 20:59:31 -0500
-
1b56a63abf
lib: Update to latest can2040 code
Kevin O'Connor
2022-11-23 11:59:24 -0500
-
9727f00e50
docs: Minor update to safe_z_home change description in Config_Changes.md
Kevin O'Connor
2022-11-22 18:57:15 -0500
-
14eec15267
safe_z_home: Fix final z hop to use relative z coordinates (#5879)
redstone99
2022-11-22 18:55:43 -0500
-
c51f169c06
lib: Update to latest can2040 code
Kevin O'Connor
2022-11-21 09:36:30 -0500
-
cfb633a0ec
lib: Update to latest can2040 code
Kevin O'Connor
2022-11-19 10:30:11 -0500
-
8977c4e764
rp2040: Fix watchdog enable
Kevin O'Connor
2022-11-17 18:42:14 -0500
-
b9a378c1ca
rp2040: Fix boundary check for max gpio pin
Kevin O'Connor
2022-11-17 14:38:41 -0500
-
d17ef95a3c
mpu9250: add MPU6500 (#5767)
Yifei Ding
2022-11-19 06:58:24 -0800
-
8a06528747
.github: Minor update to github issue chooser
Kevin O'Connor
2022-11-12 11:01:02 -0500
-
5339d138e6
.github: Remove custom issue template
Kevin O'Connor
2022-11-12 10:57:43 -0500
-
d2a1dcbbf3
docs: Update Contacts.md with improved github issue tracker description
Kevin O'Connor
2022-11-08 13:06:46 -0500
-
3fb984e152
config: Create printer-anet-a8-2019.cfg (#5902)
Bradley Methorst
2022-11-15 19:56:14 +0100
-
d883c57d77
config: Rename printer-geeetech-301.cfg to printer-geeetech-301-2019.cfg
Kevin O'Connor
2022-11-14 11:30:27 -0500
-
5e34b45063
bed_mesh: disallow null profile names
Eric Callahan
2022-11-04 06:16:41 -0400
-
6be0ba78ae
config: Remove filament specific settings from printer-geeetech-301.cfg
Kevin O'Connor
2022-11-11 14:09:48 -0500
-
0233dd32cc
config: create config for Geeetech 301 (#5830)
Peter Gruber
2022-11-11 20:08:19 +0100
-
5b1a667659
linux: use correct gpio bias flags (#5878)
Eric Callahan
2022-11-08 09:56:52 -0500
-
6485ff800b
rp2040: Support CanBoot as bootloader
Kevin O'Connor
2022-10-21 21:50:21 -0400
-
42e9adcfc9
armcm_reset: Introduce Kconfig FLASH_BOOT_ADDRESS value
Kevin O'Connor
2022-11-03 12:41:28 -0400
-
11dd273b34
fdcan: Remove spurious executable flag on fdcan.c
Kevin O'Connor
2022-11-04 11:14:27 -0400
-
342d3f1414
menu: Conditional display of common Control utils
Grigi
2022-10-23 15:03:51 +0100
-
762e2c49c7
stm32: Use consistent memory position/size on stm32h743
Kevin O'Connor
2022-10-21 20:50:09 -0400
-
972ae4ab7c
stm32: Use stm32f0_serial.c on stm32h7 chips
Kevin O'Connor
2022-10-31 13:13:32 -0400
-
26e6ade175
stm32: fix USART ORE status flag handling
Alex Voinea
2022-10-31 18:03:11 +0100
-
96ea871b35
adxl345: Apply correct scaling for X,Y and Z axes
Dmitry Butyugin
2022-10-17 19:28:41 +0200
-
d46c95b758
docs: Add a note about fixing underlying bugs in CONTRIBUTING.md
Kevin O'Connor
2022-10-20 11:56:55 -0400
-
ebc3b0def3
config: Add Artillery Sidewinder X2 2022 stock printer.cfg (#5810)
freakyDude
2022-10-22 03:03:57 +0200
-
a65e04aff7
docs: Add step rate benchmark for stm32h7
D4SK
2022-10-20 22:10:36 +0200
-
00191b5cc4
stm32: Enable instruction and data cache on stm32h7
D4SK
2022-10-20 21:59:38 +0200
-
0d9b2cc1fa
toolhead: Capture current junction_deviation in a Move class
Dmitry Butyugin
2022-10-10 01:07:04 +0200
-
e4c8a24711
stm32: Remove incorrect "spi3" definition from stm32h7
Kevin O'Connor
2022-10-17 11:01:05 -0400
-
638303b396
spi_flash: Update to fix SKR-3 config (#5827)
JamesH1978
2022-10-14 00:35:07 +0100
-
2bffa925c8
workflows: Lock comments on old PRs (no activity in a year)
Kevin O'Connor
2022-10-13 17:26:12 -0400
-
6cc104677e
lib: Update to latest can2040 code
Kevin O'Connor
2022-10-13 17:11:57 -0400
-
eb9cda91b5
config: Update duet3 mini config to recommend compiling for SAME54P20
Kevin O'Connor
2022-10-13 11:32:43 -0400
-
4b77f29c1b
atsamd: Add support CANbus on ATSAME5x chips
Kevin O'Connor
2022-09-30 18:03:21 -0400
-
0a9becc391
atsamd: Move bootloader_request() from usbserial.c to main.c
Kevin O'Connor
2022-09-30 17:36:42 -0400
-
bdf79caac4
atsamd: Add Kconfig definitions for same51j19 and same54p20 chips
Kevin O'Connor
2022-09-29 12:37:29 -0400
-
69bd26b757
lib: Add atmel same51 and same54 build definitions
Kevin O'Connor
2022-09-29 12:17:20 -0400
-
960fd0b1f3
lib: Remove unused gcc/ directories from samd21 and samd51 directories
Kevin O'Connor
2022-10-05 20:59:55 -0400
-
2c6671d8e1
stm32: Protect message ram with barrier() calls instead of voltaile in fdcan.c
Kevin O'Connor
2022-10-04 11:36:12 -0400
-
ef98cd9aba
stm32: No need for fdcan_ram global pointer in fdcan.c
Kevin O'Connor
2022-10-04 11:28:25 -0400
-
465aaf383f
stm32: Minor code movement in fdcan.c
Kevin O'Connor
2022-10-04 11:25:57 -0400
-
2d4ce1b9b1
test: Add btt manta config files to printers.test
Kevin O'Connor
2022-10-13 11:16:59 -0400
-
c51e87c11c
config: Add BigTreeTech Manta M4P & M8P board (#5812)
BIGTREETECH
2022-10-13 23:08:44 +0800
-
7290c14531
config: Update generic-th3d-ezboard-lite-v2.0.cfg (#5785)
Apulo
2022-10-06 11:16:13 -0400
-
5fad485b13
spi_flash: Add SKR2, SKR3 and Creality 4.2.2/7 to spi_flash (#5807)
JamesH1978
2022-10-05 20:05:58 +0100
-
b0ffb269d2
print_stats: add `SET_PRINT_STATS_INFO` G-Code for pass slicer variables to Klipper (#5726)
Stefan Dej
2022-10-05 21:02:28 +0200
-
a2482d4f95
z_thermal_adjust: get_temp hotfix
alchemyEngine
2022-09-29 19:44:04 +0100
-
6288da13ac
rp2040: Suppress spurious gcc v12 array bounds warning
Kevin O'Connor
2022-09-29 11:03:22 -0400
-
34870d3e2a
z_thermal_adjust: Add Z thermal adjuster module (#4157)
alchemyEngine
2022-09-25 18:39:14 +0200
-
51da02b7f8
thermocouple: Only shutdown on multiple consecutive sensor errors
Kevin O'Connor
2022-09-19 14:20:18 -0400
-
ec5719585e
spi_temperature: Separate out fault handling from temperature calculation
Kevin O'Connor
2022-09-19 14:04:18 -0400
-
4e930294b8
thermocouple: Report fault information in fault field
Kevin O'Connor
2022-09-19 13:28:45 -0400
-
ddb59440a8
logextract: Improve detection of clock and tmc uart parameters
Kevin O'Connor
2022-09-20 11:08:54 -0400
-
7527e57e5a
config: Add Ender 3 S1 Plus (#5705)
Fisheiyy
2022-09-16 11:06:49 -0500
-
d9c917b950
stm32l4: add stm32l412 support with adc,i2c,spi,usb
Matt Baker
2021-04-22 13:44:39 -0700
-
57b0eb5d43
stm32l4: copy libs from STM32CubeL4 v1.17.0
Matt Baker
2021-04-22 13:25:45 -0700
-
8cdb2278d7
docs: Add an example corexy homing macro to TMC_Drivers.md
Kevin O'Connor
2022-09-14 17:49:25 -0400
-
79be427757
docs: Reword sensorless homing high sensitivity test in TMC_Drivers.md
Kevin O'Connor
2022-09-14 17:13:48 -0400
-
ee5bdbadd1
config: Fix Ender 3 S1 Config (#5771)
Fisheiyy
2022-09-11 21:16:24 -0500
-
721c764746
Update printer-anycubic-vyper-2021.cfg (#5692)
JackyHe398
2022-09-12 10:12:06 +0800
-
a530bf2421
docs: Add SDIO programming and split verification details to SDCard_Updates
Donna Whisnant
2022-08-17 23:35:25 -0500
-
773f9ac56c
scripts: Support BigTreeTech Octopus boards in flash-sdcard.
Donna Whisnant
2022-08-17 23:19:40 -0500
-
a0457f79e4
scripts: Support SDIO in flash-sdcard using split verification step
Donna Whisnant
2022-08-22 10:23:49 -0500