Commit Graph

62 Commits

Author SHA1 Message Date
Kevin O'Connor 2981bd601b extruder: Treat extrude with Z only movement to be an "extrude only" move
Do not apply max_extrude_cross_section check, and do apply
extrude_only_xxx checks to Z only moves that also extrude.  Some
printer start scripts will prime the extruder while moving the Z.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-07 09:45:36 -05:00
Kevin O'Connor 86121ff79e toolhead: Calculate and store axes_r in move class
Calculate the ratio of axis distance to total move distance (axis_d /
move_d) and store in a new member variable axes_r.  This avoids
needing to recalculate the value in other code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-06 15:51:51 -05:00
Kevin O'Connor 1acaaa98c2 trapq: Remove move_fill()
Now that all callers use the trapq system to queue moves, it is no
longer necessary to individually allocate and fill a 'struct move'.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-06 15:51:51 -05:00
Kevin O'Connor 9845d0d103 extruder: Convert step generation to use trapq system
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-06 15:51:51 -05:00
Kevin O'Connor e60ee861f8 extruder: Use template evaluation on gcode
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-06-07 11:38:43 -04:00
Janar Sööt 9155886c21 extruder: add get_status method
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
2019-06-04 11:44:57 -04:00
Kevin O'Connor 1731fbbca4 gcode: Change respond_info() to log by default
It makes sense to log most respond_info() content, so do that by
default.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-03-04 13:04:18 -05:00
Kevin O'Connor d7e8264d92 extruder: Wrap code to 80 columns
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-02-27 13:07:41 -05:00
john-- f6c9150349 heater: take a gcode_id when setting up a heater (#1028)
Allow an arbitrary gcode_id to be supplied during heater setup. This allows future extras to register additional IDs beyond B, and T#.

Signed-off-by: John Jardine <john@gprime.net>
2019-01-02 17:44:02 -05:00
Kevin O'Connor 97590b8e0b extruder: Don't use max_extrude_cross_section in max_extrude_only defaults
Some users increase max_extrude_cross_section to avoid issues with
some slicers.  However, increasing that value also increases the
defaults for the max_extrude_only parameters which is not obvious.
Base the max_extrude_only defaults only on the configured nozzle
diameter.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-25 19:09:47 -04:00
Kevin O'Connor a31c31aed4 mcu: Enhance itersolve stepper kinematics allocation
Allocate the stepper_kinematics directly in mcu.py - that way the
kinematic classes don't have to interact with the chelper code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-13 11:37:36 -04:00
Kevin O'Connor 8faab46ed2 toolhead: Move kinematic modules to new kinematics/ directory
Move extruder.py, cartesian.py, corexy.py, and delta.py to a new
kinematics/ sub-directory.  This is intended to make adding new
kinematics a little easier.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-12 22:50:25 -04:00