3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1,914 Commits 1 Branch 0 Tags 27 MiB
Commit Graph

368 Commits

Author SHA1 Message Date
Kevin O'Connor f2ca7d5c66 verify_heater: Improve handling of new targets when temperature is dropping 
Allow the first check_gain_time interval to only require a
heating_gain relative to the lowest observed temperature during that
interval.  This makes the code less likely to raise a spurious error
when the heater is enabled while the heater temperature is dropping.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-08 10:55:46 -05:00
Kevin O'Connor 893bb32d01 verify_heater: Only reset the error count if within the hysteresis range 
Don't reset the error counter if the reported temperature is
significantly above the target temperature.  This may help catch cases
where the temperature sensor reports random values.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-08 10:55:46 -05:00
Kevin O'Connor 1731fbbca4 gcode: Change respond_info() to log by default 
It makes sense to log most respond_info() content, so do that by
default.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-04 13:04:18 -05:00
Kevin O'Connor d62a41b930 manual_stepper: Add support for moves with acceleration 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-03 13:38:10 -05:00
Arksine 3c79e484d5 filament_switch_sensor: initial implementation of switch based filament runout/insert sensor 
This implementation includes a BaseSensor class that all underlying sensor implementations should subclass.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-03-01 00:45:51 -05:00
Arksine 3cd1f9676d pause_resume: Implement send_pause_command() 
This allows for pausing from inside a reactor callback.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-03-01 00:45:51 -05:00
Kevin O'Connor c8d7e28a35 atsamd: Add support for programming SERCOM pins 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-01 00:40:44 -05:00
Kevin O'Connor 8617cbcb76 tmc2130: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-01 00:35:20 -05:00
Kevin O'Connor c039b33f2a tmc2130: Add support for INIT_TMC command 
Signed-off-by: Frank Kang <amblidex@outlook.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-01 00:24:39 -05:00
Kevin O'Connor 5f5d39ef3f bed_screws: Fix missing import 
Reported by @JoaoFelipe.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-28 00:30:05 -05:00
Kevin O'Connor 264505a1b0 tmc2130: Report write-only registers in DUMP_TMC 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 18:53:18 -05:00
Kevin O'Connor f7d8fde502 tmc2208: Report write-only registers in DUMP_TMC 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 18:49:45 -05:00
Kevin O'Connor 1b064b5a5d tmc2660: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 14:33:17 -05:00
Kevin O'Connor c1670ea336 tsl1401cl_filament_width_sensor: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 14:33:17 -05:00
Kevin O'Connor 20040f4a18 quad_gantry_level: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 14:33:17 -05:00
Kevin O'Connor a4a23dee9f respond: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 14:33:17 -05:00
Kevin O'Connor 0b095ddf47 temperature_fan: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 14:33:17 -05:00
Kevin O'Connor f13c5d4cdb sx1509: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 14:33:17 -05:00
Kevin O'Connor 2d99a1e802 buttons: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:34:22 -05:00
Kevin O'Connor ef1bf60ab7 hd44780: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:31:47 -05:00
Kevin O'Connor 51051478af st7920: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:31:31 -05:00
Kevin O'Connor d6d23c8415 thermistor: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:29:41 -05:00
Kevin O'Connor 9f1d9bf0f4 probe: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:28:55 -05:00
Kevin O'Connor ea1814e017 Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:27:52 -05:00
Kevin O'Connor e504147285 font8x14: Store font as strings instead of as bytearray 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:26:59 -05:00
Kevin O'Connor 21e45cac64 spi_temperature: Wrap code to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 13:14:23 -05:00
Douglas Hammond b6589406d4 temperature_sensor: Add generic temperature sensor support 
Signed-off-by: Douglas Hammond <wizhippo@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-26 13:15:56 -05:00
Douglas Hammond f9968904d6 temperature_fan: Remove stats as it now supports gcode reports 
Signed-off-by: Douglas Hammond <wizhippo@gmail.com>
 2019-02-26 12:07:00 -05:00
Douglas Hammond 3887ad4fce heater: Support generic gcode_id registration for sensors 
Support reading a "gcode_id" parameter from heater/sensor config
sections.

Signed-off-by: Douglas Hammond <wizhippo@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-26 12:07:00 -05:00
Kevin O'Connor 34209e6189 heater_bed: Wrap lines to 80 columns 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-26 11:20:01 -05:00
Kevin O'Connor adf6040e9e gcode: Use an event to handle restart request actions 
Instead of directly turning off motors, heaters, and fans from
gcode.py, raise a new event and allow the heater, fan, and toolhead to
handle the event as needed.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-25 21:26:27 -05:00
Kevin O'Connor bb4fab5570 heater: Rename add_sensor() to add_sensor_factory() 
Signed-off-by: Douglas Hammond <wizhippo@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-25 20:34:12 -05:00
Arksine f7d8854587 bed_mesh: simplify configuration 
The 'bed_shape' option has been removed.  The user will enter a 'bed_radius' if they have a round be, otherwise they should enter 'min_point' and 'max_point'.  When the bed is round the user should supply a 'round_probe_count' option, otherwise just 'probe_count'.

Signed-off-by: Eric Callahan <arksine.code@gmail.com>
 2019-02-25 13:34:14 -05:00
Arksine 7694c3e1b8 bed_mesh: fix get_position() 
Fix a bug where the fade factor is calculated incorrectly when get_position() is called.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-02-25 13:34:14 -05:00
Arksine f308171be4 bed_mesh: refactor fade_target 
Offset the entire mesh by the fade target amount rather than offset each z lookup.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-02-25 13:34:14 -05:00
Rui Caridade 749beb731c probe: Set z min value in probe_accuracy to z_offset. (#1314) 
Signed-off-by: Rui Caridade <rui.mcbc@gmail.com>
 2019-02-25 12:52:54 -05:00
Kevin O'Connor 80c8bd8b4d bed_screws: Add a helper tool for leveling bed screws 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-24 00:49:47 -05:00
Kevin O'Connor 5bc47d9416 tmc2130: Use FieldHelper() to set/get driver fields 
Use the field helper to simplify the bit manipulation in the driver.
This also enables the extended DUMP_TMC output.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-21 11:35:58 -05:00
Kevin O'Connor b260eb9168 gcode: Raise a config error on invalid register_command() 
Raise a printer.config_error() on an invalid register_command() call.
This error is easier to handle for the vast majority of callers.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-18 18:04:42 -05:00
Rui Caridade 276d5a1436 probe: Add PROBE_ACCURACY command 
Implementation of "PROBE_ACCURACY" to measure the maximum, minimum,
average and standard deviation of a probe.

Signed-off-by: Rui Caridade <rui.mcbc@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-18 00:36:28 -05:00
Kevin O'Connor cc4ecef88b mcp4018: Add initial support for the mcp4018 digipot 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-16 08:16:37 -05:00
nopbit 0f674ef407 tsl1401cl_filament_width_sensor: Filament Width Sensor Support (#1132) 
Support added for filament diameter sensor. Sample configuration parameters added to example-extras.cfg.

Signed-off-by: Mustafa YILDIZ <mydiz@hotmail.com>
 2019-02-14 10:13:48 -05:00
KevinOConnor c6d1d1bd8c
Merge pull request #1242 from john--/pr_generic_heater 
Generic Heater Support
 2019-02-14 10:08:26 -05:00
John Jardine 6316b2c1b6 Generic Heater Support 
Adds the ability to register a custom/generic heater through a new extra called heater_generic.
This takes a gcode_id that is reported by M105. Adds a new command to set the temperature for any heater using the syntax:
SET_HEATER_TEMPERATURE HEATER=<heater_name> TARGET=<target_temp>

Signed-off-by: John Jardine <john@gprime.net>
 2019-02-14 01:15:11 +00:00
Kevin O'Connor 98ed462865 spi_software: Implementation of software spi 
Signed-off-by: Matt Janus <FragginRight@variabl.es>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-13 11:52:20 -05:00
Kevin O'Connor 2d7c3a84ee manual_stepper: Add an "extras" module for manually controlling a stepper 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-12 13:38:13 -05:00
Kevin O'Connor b0b9fc6f4a probe: Use manual_probe helper when performing manual probes 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-12 13:20:32 -05:00
Kevin O'Connor 35ea4a137d probe: Add PROBE_CALIBRATE command 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-12 13:20:32 -05:00
Kevin O'Connor d14a53e160 manual_probe: Add a helper script for performing manual Z probing 
Add MANUAL_PROBE and Z_ENDSTOP_CALIBRATE commands.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-12 13:20:32 -05:00
Kevin O'Connor f1c804907c virtual_sdcard: Don't list files starting with a '.' 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-08 11:48:53 -05:00