5fad485b13
spi_flash: Add SKR2, SKR3 and Creality 4.2.2/7 to spi_flash ( #5807 )
...
As discussed with Arksine, he has created new working settings for the Creality 4.2.x boards as the original 4.2.7 entry did not work, plus addition of SKR2 and SKR3. Tested on 4.2.2 and SKR2 and SKR3EZ.
These are using the new skip_verify functionality that was recently merged due to them using SDIO
Also removed a double definition for `monster8` it was in main definitions and aliased.
Signed-off-by: James Hartley <james@hartleyns.com>
2022-10-05 15:05:58 -04:00
ddb59440a8
logextract: Improve detection of clock and tmc uart parameters
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-09-20 11:08:54 -04:00
d9c917b950
stm32l4: add stm32l412 support with adc,i2c,spi,usb
...
Signed-off-by: Matt Baker <baker.matt.j@gmail.com>
2022-09-15 11:51:26 -04:00
773f9ac56c
scripts: Support BigTreeTech Octopus boards in flash-sdcard.
...
Signed-off-by: Donna Whisnant <dewhisna@dewtronics.com>
2022-09-11 21:57:28 -04:00
a0457f79e4
scripts: Support SDIO in flash-sdcard using split verification step
...
Signed-off-by: Donna Whisnant <dewhisna@dewtronics.com>
2022-09-11 21:57:28 -04:00
35e2472bbc
motan: Improve reading of initial step position data
...
Seed the initial position from the first read position, even if it is
some time into the capture.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-09-05 11:22:40 -04:00
2e1b649617
dump_mcu: helper for mcu flash backups
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2022-09-01 13:51:00 -04:00
db507f89b9
scripts: Update install-debian.sh ( #5704 )
...
Add pkg-config reference because hid-flash needs it to build.
Signed-off-by: Adrian Joachim <adi.joachim12@gmail.com>
2022-08-24 13:30:33 -04:00
48b60a8021
graphstats: Normalize mcu frequency to microseconds when graphing multiple mcus
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-29 11:40:54 -04:00
a151aa8c7a
spi_flash: Add board definition for Mellow FLY Gemini V2 ( #5651 )
...
Signed-off-by: Tobias Schröder <schroedt@live.de>
2022-07-20 21:57:08 -04:00
1636a9759b
stm32: stm32g0/h7 usb_dfu_bootloader support ( #5596 )
...
Signed-off-by: Alan.Ma from BigTreeTech <tech@biqu3d.com>
2022-06-30 13:58:00 -04:00
6af931c4e1
spi_flash: add mks_monster8,robin_v3 ( #5568 )
...
Signed-off-by Andreas Fröhlke <boandy1985@googlemail.com>
2022-06-18 13:08:30 -04:00
b9e195f098
flash_usb: Use hexid "2e8a:0003" for rp2040 already in bootloader mode
...
Use a USB hex id to indicate that the device is already in bootloader
mode. This makes the rp2040 flashing code similar to the other
boards.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-16 10:59:11 -04:00
1b6ab65833
flash_usb: update shebang to python3
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2022-06-10 11:23:04 -04:00
3e1719bdbb
flash_usb: add canboot support
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2022-06-10 11:23:04 -04:00
907b47b238
flash_usb: Rework flash_rp2040 code to be similar to other boards
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-01 10:47:31 -04:00
88731c2836
scripts: identify application in canbus_query
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2022-05-10 11:48:06 -04:00
261944cc7b
graphstats: Improve labels on twinx() graphs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-06 15:05:04 -04:00
6f0b7c7a2a
graphstats: Fix system graph title
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-06 15:01:27 -04:00
dc28257a75
spi_flash: reduce speed to 400K
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2022-04-25 12:02:45 -04:00
ccae1e3ec8
spi_flash: validate mcu configuration
...
Prior to attempting a flash, verify that the MCU is successfully
configured.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2022-04-25 12:02:45 -04:00
5517a856cc
motan: Fix typo in error report
...
Reported by @Ludy87.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-23 21:50:27 -04:00
7db07c46e6
spi_flash: support spi protocol changes
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2022-04-22 20:46:45 -04:00
76558168d9
motan: Add support for analyzing "angle" sensor data
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-03-29 20:34:46 -04:00
8049243221
atsam: Add support for SAM E70
...
Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2022-03-26 11:59:27 -04:00
c8cc2a1e27
scripts: Migrate `check_whitespace.py` to python3
...
Modified strings used in pattern matching to b-strings as are expected
with python3.
Signed-off-by: Miklos Tusz <miklos@aon3d.com>
2022-03-14 13:53:21 -04:00
2b2caa8f05
klippy-requirements: Pin markupsafe==1.1.1 to fix python3 ( #5286 )
...
Markupsafe updated and the latest version no longer includes `soft_unicode`
Signed-off-by: Franklyn Tackitt <git@frank.af>
2022-02-21 13:26:18 -05:00
6d7c03365a
logextract: Add support for reordering stepper queue messages by timestamp
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-02-07 00:06:40 -05:00
c8560b367d
logextract: Add support for reordering trapq moves by timestamp
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-02-06 23:42:01 -05:00
739ff465a7
logextract: Support reordering API Server messages by timestamp
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-02-06 23:15:28 -05:00
6cd1e794f7
logextract: Breakup shutdown parsing into classes
...
Separate out message parsing into individual classes. This should
make the code a little eaiser to understand.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-02-06 23:14:31 -05:00
a7b01857f5
flash_usb: use sudo for rp2040 flashing
...
The rp2040 can be flashed without sudo when using udev rules to give the
user permission, but in a standard configuration sudo is required.
Here we make it possible for flash_usb to use sudo for the rp2040
target, and make it the default when using `make flash` for the rp2040.
As for other targets, one can set `NOSUDO=1` to not call through sudo.
Signed-off-by: Lasse Dalegaard <dalegaard@gmail.com>
2022-01-31 11:10:02 -05:00
b414fc4975
spi_flash: Add btt-skr-bx-se to the board types ( #4951 )
...
Signed-off-by: Aaron DeLyser <bluwolf@gmail.com>
2022-01-29 13:32:48 -05:00
7c0559c6e6
rp2040: add make flash support
...
This adds `make flash` support for the rp2040 target. Flashing is
performed using a custom `rp2040_flash` tool that uses the PICOBOOT
protocol. Root is not required.
The user specifies the serial device of the rp2040 they wish to flash as
the device. This device is reset into bootsel mode and `rp2040_flash`
is invoked on the original USB device path.
If the device is already in bootloader mode, the user can specify
'first' as `FLASH_DEVICE` which will simply invoke `rp2040_flash` with
no bus/address options.
Signed-off-by: Lasse Dalegaard <dalegaard@gmail.com>
2022-01-06 17:32:54 -05:00
309b8e030f
scripts: Migrated shaper calibration scripts to Python3
...
Also updated instructions to install python3-numpy and
python3-matplotlib Python packages.
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2021-12-30 18:14:53 -05:00
f0b20f0bdf
spi_flash: Add btt-skr-mini-e3-v3 board definition
...
Signed-off-by: Alan.Ma from BigTreeTech <tech@biqu3d.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-12-23 22:15:26 -05:00
8b2da0d353
motan: Fix comment copy-and-paste error in readlog.py
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-12-01 20:09:25 -05:00
cfff897480
spi_flash: Better fallback on MCU protocol change
...
Support a set of known past config responses.
Signed-off-by: Justin Schuh <code@justinschuh.com>
2021-11-09 20:15:46 -05:00
76bfc3237a
spi_flash: Fix MCU handshake protocol
...
Update config response string to match new version from d4aee4f
2021-11-08 20:07:38 -05:00
dd98884bb4
buildcommands: Use regular str() types for input on Python2
...
Avoid using unicode() types on Python2 as it can lead to subtle
errors.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-31 13:52:31 -04:00
d5a7a7f00f
input_shaper: Define input shapers in a single place in Python code
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2021-10-26 16:14:50 -04:00
5c10001bc5
motan: Minor change to corexy analyzer label
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-16 22:18:51 -04:00
cf3b7d290c
motan: Add an analyzer to integrate accelerometer input
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-16 22:18:51 -04:00
466198c0f4
motan: Add support for graphing stepper motor phase and microstep position
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-16 22:18:51 -04:00
03021ae722
motan: Show data filename in graph title
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-16 22:18:45 -04:00
c56c34fa1c
configfile: Use Python2's ConfigParser when running on Python2
...
The backport of Python3's configparser causes issues when there is
unicode characters in the config file. To avoid introducing new
errors, go back to using the Python2 version of ConfigParser when
running on Python2.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-09 19:37:48 -04:00
1a4d655a18
spi_flash: Improve Python3 compatibility
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-07 20:05:15 -04:00
cc63fd51b2
scripts: Use backport of a recent Python3 configparser on Python2
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-04 15:10:46 -04:00
41d42a07bf
klippy: Add a build import test tool
...
Add a test case to verify that every optional module successfully
loads on both Python2 and Python3. This is intended to catch syntax
and module imports that are not compatible between Python versions.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-04 14:36:08 -04:00
b743a64685
scripts: Update klippy build tests to verify on both Python2 and Python3
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-04 14:36:08 -04:00
JamesH1978