a20d9d3bd5
samd21: Enable HAVE_GPIO_BITBANGING
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 11:11:28 -04:00
82a542faed
Kconfig: Rename HAVE_USER_INTERFACE to HAVE_GPIO_BITBANGING
...
Rename the HAVE_USER_INTERFACE definition in preparation for other
"bit banging" interfaces.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 11:09:47 -04:00
ee67715e2b
docs: Fix link in Bootloaders.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 09:16:27 -04:00
28fe6a5df0
docs: Update SAMD21 flashing information in Bootloaders.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 09:07:27 -04:00
9b56c4f780
docs: Update Bootloaders.md with updated bossac info for sam3x8e
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 08:54:43 -04:00
daf4d237c0
scripts: No longer require bossa-cli in install-octopi.sh
...
Now that there is a local copy of bossac in the lib directory, there's
no reason to require a system version of it.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 08:54:43 -04:00
051e8724a0
sam4e8e: Use local copy of bossac for flashing
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 08:54:43 -04:00
22f0db06a1
sam3x8e: Use local copy of bossac for flashing
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 08:54:43 -04:00
2b9124f3c0
lib: Add bossac 1.9 code to lib directory
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 08:54:43 -04:00
79632878ac
config: Updates to printer-wanhao-duplicator-i3-v2.1-2017.cfg
...
Add lcd encoder pins. Add comment on 10K pullups.
Signed-off-by: Carlos Felicio <cfeliciomobil@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 08:45:04 -04:00
22132a5516
config: Add encoder buttons to generic-ramps.cfg
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-26 23:08:27 -04:00
ad480bd470
mcu: Avoid adding the same stepper multiple times to an endstop
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-26 23:06:32 -04:00
96acfdc6d2
docs: Minor rewording of Marlin pin number section of FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-26 23:06:32 -04:00
e6208c6f02
config: Added pins for LCD encoder and button click on Creality Ender 3 ( #574 )
...
Signed-off-by: Gonzalo Ramírez <controla@gmail.com>
2018-08-26 23:05:13 -04:00
a27e82aef3
docs: Add a section to the FAQ on translating Marlin pin numbers
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-24 21:43:53 -04:00
11e9bb286e
probe: Allow restarting an incomplete probe set
...
Signed-off-by: Romain “Artefact2” Dal Maso <artefact2@gmail.com>
2018-08-24 13:20:55 -04:00
b065f51454
sam4e8e: Fix bug in sam4e gpio.c ( #563 )
...
The bank_id was calculated erroneously. Also unify gpio_in_setup and gpio_out_setup a bit. Also disable make flash for the sam4e8e port as it currently references a version of bossac that is not present on all systems.
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2018-08-24 13:17:53 -04:00
a8a912fbb5
docs: Update sam4e8e docs and benchmarks ( #562 )
...
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2018-08-22 19:17:43 -04:00
e94f3b7827
gcode: M117 fix
...
Resolves issue where M117 is not correctly executed when the message begins with numeric or special character.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-08-22 12:53:42 -04:00
65f0fd6238
display menu module for klipper
...
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
2018-08-20 22:33:05 -04:00
3387cccdcf
bed_mesh: move probe x and y offsets to the [probe] module
...
All probe offsets are now passed to the finalize() callback in the ProbePointsHelper Class.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-08-19 16:52:23 -04:00
52df40dfbb
bed_mesh: update z_offset check
...
Only check the probe's z_offset against the stepper_z endstop position if the probe is used as a virtual endstop.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-08-19 16:52:23 -04:00
08aacec0b2
config: Update example-extras.cfg ( #544 )
...
Changed 'endstop' to 'stepper' in 'multi-steppers axes' section
Signed-off-by: Ben Warren <boffdroid@gmail.com>
2018-08-19 10:15:48 -04:00
1b07be070b
heater_fan: Allow multiple heaters to be defined for a heater_fan
...
Support the case where a single cooling fan is used with multiple
extruders.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-17 10:20:12 -04:00
e88eab18d0
test: Update .travis.yml to list apt packages one per line
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-17 09:47:57 -04:00
868a1f951b
docs: Add Mesh Bed Leveling to G-Codes.md
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-08-17 09:22:55 -04:00
f337fb1802
config: update examples-extra.cfg to include the bed_mesh module
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-08-17 09:22:55 -04:00
e0bd221c57
bed_mesh: mesh bed leveling for Klipper
...
Initial implementation of configurable Mesh Bed Leveling.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2018-08-17 09:22:55 -04:00
be3131de3e
docs: Update Config_checks.md to use STEPPER_BUZZ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-09 13:46:07 -04:00
3f59c3dd48
docs: Add a Bootloaders.md document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-08 20:47:04 -04:00
5fb1c76c0e
samd21: Fix description of bootloader offset
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-08 19:56:43 -04:00
71063fe500
docs: Warn about possible pin conflicts in benchmarks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-08 13:52:08 -04:00
cbf019a468
docs: It's difficult to estimate real-world usage from the benchmarks
...
Remove the prediction on real-world usage as it's not really practical
to make a prediction.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-08 13:39:29 -04:00
fbec3ebb63
docs: Add benchmarking details to docs/Debugging.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-08 13:28:08 -04:00
64e6d85898
sam4e8e: Add the SAM4e8e port
...
This can be flashed to e.g. the duet wifi using bossac. It requires a
later version as is currently included in the klipper repo (1.8
vs. 1.2). Comms are currently via UART0 only, USB serial is still TBD
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2018-08-08 10:44:49 -04:00
d15c106288
lib: Add SAM4E CMSIS HAL
...
Obtained from Atmel.SAM4E_DFP.1.1.57.atpack
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
2018-08-08 10:44:38 -04:00
f067d0cc78
samd21: Minor fixes to usbserial
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-08 10:43:57 -04:00
2eaf3510ab
test: Add SAMD21 compile test case
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-07 00:14:16 -04:00
a5d27c55e1
docs: Update perf benchmarks with SAMD21 results
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-07 00:03:42 -04:00
0daf19c003
samd21: Add support for USB
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-07 00:03:41 -04:00
cf2393efc8
samd21: Add support for gpio pins
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-07 00:03:21 -04:00
74cf4dc9e0
samd21: Initial support for SAMD21 micro-controllers
...
Add initial support for the Atmel SAMD21 micro-controllers.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-07 00:03:18 -04:00
71db5fbe31
lib: Update samd21 code with local changes
...
A minor change is necessary to work with GCC's -flto and to work with
common bootloaders.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-07 00:02:44 -04:00
5633e6c249
lib: Add Atmel SAMD21 cmsis headers
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-06 23:36:05 -04:00
50142cc1b3
armcm_irq: Enhance clear_active_irq() so it works on cortex-m0
...
Minor rework of the assembler so that it does not require thumb-2
instructions.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-06 23:36:05 -04:00
635a199a47
usb_cdc: Allow USB endpoint ids to be board specific
...
It's common for boards to have restrictions on the type of each
endpoint. So, make it possible for the board to select the endpoint
ids for each endpoint.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-06 23:36:05 -04:00
f4910e119a
lpc176x: Use common cmsis-core files
...
No need to include separate cmsis files from the mbed project - the
standard CMSIS_5 files work fine.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-06 23:36:05 -04:00
742048a08d
lib: Remove the (now unused) cmsis-sam3x8e directory
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-06 23:36:05 -04:00
e1146c04fd
sam3x8e: Use SAM3X CMSIS files instead of arduino CMSIS files
...
Update the sam3x8e port use the most recent SAM3X CMSIS files from
Atmel. The Atmel files appear to have a more consistent license and
it is unclear if there were Arduino specific changes in the CMSIS
files obtained from the Arduino repo.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-06 23:36:05 -04:00
8572cae9a0
lib: Modify SAM3X CMSIS files to work with GCC's lto feature
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-06 23:36:05 -04:00
Kevin O'Connor