3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3,808 Commits 1 Branch 0 Tags 27 MiB
Commit Graph

119 Commits

Author SHA1 Message Date
Dmitry Butyugin 200b62bcb4 adxl345: Verify the register writes, added debug adxl345 commands 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2021-04-24 13:15:17 -04:00
Clifford Roche e2a3217289
palette2: Add support for P2 devices (#4057) 
Module which bring support for P2 devices running in connected mode. This enables using a Palette2 directly with Klippy without Octoprint, or without Palette2 plugins for Octoprint which are not functional out of the box with Klipper.

Signed-off-by: Clifford Roche <clifford.roche@gmail.com>
 2021-03-26 11:21:10 -04:00
TheJoshW bf8f7133b4
filament_motion_sensor: Add filament_motion_sensor (#3857) 
Add functionality to support a Filament Motion Sensor for detecting extruder jams as well as runouts.  Works by an encoder toggling the switch_pin 0/1 as the filament is pulled through the sensor.

Signed-off-by: Joshua Wherrett <thejoshw.code@gmail.com>
 2021-03-14 21:36:19 -04:00
Kevin O'Connor 715b89ce0c docs: Rename Sensorless_homing.md to TMC_Drivers.md and extend 
Add additional information on configuring and using TMC drivers.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-03-10 20:09:34 -05:00
Lane Roberts 19397a0a2b
temperature_fan: Add MAX_SPEED and MIN_SPEED to SET_TEMPERATURE_FAN_TARGET command (#3873) 
Allows setting min_speed and max_speed at runtime, rather than updating the config and restarting.

Signed-off-by Lane Roberts <nolatari@vandarin.net>
 2021-02-02 14:30:04 -05:00
Dmitry Butyugin a8b282d67a resonance_tester: Disable input shaping for resonance testing 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2021-02-02 14:13:24 -05:00
Dmitry Butyugin 0fb2449be0 adxl345: Add accelerometer chip name to the raw data file name 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2021-02-02 14:13:24 -05:00
Justin Schuh a5ebe5825a
heaters: Make MINIMUM optional for TEMPERATURE_WAIT command (#3674) 
Signed-off-by: Justin Schuh <code@justinschuh.com>
 2020-12-24 11:34:26 -05:00
Justin Schuh 1a9218532b heaters: Add MAXIMUM option to TEMPERATURE_WAIT command 
Signed-off-by: Justin Schuh <code@justinschuh.com>
 2020-12-23 18:16:46 -05:00
Dmitry Butyugin ab93ee9293 docs: Limiting max_smoothing for input shaper autocalibration 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2020-12-22 18:37:41 -05:00
Kevin O'Connor 7dcc778b6c stepper: Calculate step_distance from rotation_distance 
Add support for automatically calculating the internal step_distance
from new config parameters - rotation_distance, microsteps,
full_steps_per_rotation, and gear_ratio.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-18 10:30:32 -05:00
Kevin O'Connor e83801daab heaters: Add a TEMPERATURE_WAIT command 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-07 09:57:13 -05:00
Kevin O'Connor d7053f6e71 save_variables: Support saving variables to a disk file 
Signed-off-by: Dushyant Ahuja dusht.ahuja@gmail.com
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-03 12:19:47 -05:00
Kevin O'Connor 88c7bf830f G-Codes: Minor formatting fix 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-11-23 11:52:46 -05:00
Kevin O'Connor d1173d59c9 docs: Add more links to G-Codes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-11-23 11:25:19 -05:00
Kevin O'Connor 15b5dbaf8f docs: Move config reference information to new Config_Reference.md 
Move all the config reference information from files in the config/
directory to a new Config_Reference.md document.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-11-18 20:10:21 -05:00
Kevin O'Connor 7263077db5 neopixel: Add support for RGBW LEDs 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-10-29 12:00:25 -04:00
Dmitry Butyugin f8c4f90c04
resonance_tester: Resonance testing and input shaper auto-calibration (#3381) 
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2020-10-14 20:08:10 -04:00
Kevin O'Connor 55e20f2c19 mcu: Add support for changing cycle_time in set_pwm() 
Signed-off-by: Guy Shapira <gayuha@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-09-26 20:55:56 -04:00
Arksine 3ac636b33e docs: document additions to BED_MESH_CALIBRATE 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-09-15 20:36:55 -04:00
Kevin O'Connor 9197975625 docs: Note that FORCE_MOVE can lead to "No next step" errors in G-Codes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-09-08 10:18:28 -04:00
Kevin O'Connor 3405095f0a adxl345: Add support for adxl345 accelerometer 
Add support for taking measurements from an adxl345 accelerometer via
SPI interface.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-09-05 09:11:04 -04:00
bondus c9e7119a93
fan_generic: Add support for named fans and gcode to control them (#3054) 
Signed-off-by: Pontus Borg <liquidpontus@yahoo.se>
 2020-08-07 11:39:44 -04:00
Arksine 74c0e3a484 docs: document changes to the virtual_sdcard module 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-08-05 13:46:24 -04:00
Kevin O'Connor 25a9a32ecb docs: Move SET_TEMPERATURE_FAN_TARGET to its own section in G-Codes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-07-26 10:41:43 -04:00
Martin Nowroth ab923883f7
docs: Update G-Codes.md for SET_TEMPERATURE_FAN_TARGET (#3122) 
Added extended G-Code documentation for SET_TEMPERATURE_FAN_TARGET

Signed-off-by: Martin Nowroth <madnoth@gmail.com>
 2020-07-26 10:39:53 -04:00
Kevin O'Connor 428a8d4881 servo: Remove servo ENABLE parameter 
Allow one to disable servos via `SET_SERVO WIDTH=0` instead of using
an explicit ENABLE parameter.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-07-25 11:39:39 -04:00
Dmitry Butyugin 4bdc11a8b3
input_shaper: Initial support of input shaping (#3032) 
Input shaping can help to reduce printer vibrations due to resonances
and eliminate or reduce ghosting in prints.

Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
 2020-07-05 20:54:38 -04:00
Kevin O'Connor 467e8e6f40 display: Default DISPLAY=display in SET_DISPLAY_GROUP command 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-09 12:19:53 -04:00
Florian Heilmann 68fcbe2a62
display: add SET_DISPLAY_GROUP command (#2969) 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2020-06-09 12:07:25 -04:00
theophile 518fe023b4
extruder_stepper: Support changing synced extruder on the fly (#2824) 
Signed-off-by: Christopher Meredith <chmeredith@gmail.com>
 2020-06-06 14:30:58 -04:00
Dushyant Ahuja 1eb2d4da90
docs: Clarify that Probe_Calibrate uses the speed variable for XY as well (#2735) 
Signed-off-by: Dushyant Ahuja <dusht.ahuja@gmail.com>
 2020-05-05 09:03:39 -04:00
David Smith d4bf61262e
Extruder: Add g-code to set extruder step_distance (#2598) 
Signed off by: David Smith <davidosmith@gmail.com>
 2020-03-28 09:52:46 -04:00
Kevin O'Connor 849cc075dc docs: Fix typo in MANUAL_STEPPER command line 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-03-23 15:06:32 -04:00
Jeremy Briffaut 6be552f6e6 Allow manual_stepper to run in parallel than an other stepper 
Signed-off-by: Jeremy Briffaut <kakou@kakou.org>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-03-23 14:43:34 -04:00
Garth Snyder 0ba83c5b04
docs: clarify behavior of M204 with only one of P or T (#2564) 
Signed-off-by: Garth Snyder <garth@garthsnyder.com>
 2020-03-11 13:03:48 -04:00
FanDjango 16ecf15a91
bltouch: BTLOUCH V3.0/V3.1 Enable 5V/OD mode set commands (#2540) 
Signed-off-by: Mike Stiemke <fandjango@gmx.de>
 2020-02-23 22:32:07 -05:00
Kevin O'Connor 15f21be5ec manual_stepper: Support ignoring errors on STOP_ON_ENDSTOP 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-02-19 13:38:22 -05:00
David Smith 596f5e3e3a
stepper_enable: Add SET_STEPPER_ENABLE gcode command (#2463) 
Signed-off-by: David Smith <davidosmith@gmail.com>
 2020-02-10 22:34:11 -05:00
Kevin O'Connor c36fe76d69 probe: Add support for configuring lift_speed 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-31 15:47:06 -05:00
Arksine edae40c36f docs: Update documentation to reflect bed_mesh changes 
Also add new bed_mesh.md documentation.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-01-09 14:14:13 -05:00
Kevin O'Connor b921b8a1c1 docs: Document support for M204 P and T parameters 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-18 16:34:45 -05:00
Kevin O'Connor 254789f4c5 neopixel: Add support for delaying updates in SET_LED command 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-15 23:24:17 -05:00
Kevin O'Connor fcee27fc19 gcode: Remove builtin T0/T1/T2/... command support 
The builtin Tn command is not sufficiently flexible to control some
multi-extruder printers.  Remove the command and encourage users to
define individual gcode_macros for each Tn instance.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-10 14:24:32 -05:00
Kevin O'Connor c06618193d extruder: Add an ACTIVATE_EXTRUDER command 
Add support for an extended g-code command to change the currently
active extruder.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-10 14:23:13 -05:00
Kevin O'Connor ab2d302b7e gcode: Remove support for the M206 command 
The M206 command isn't particularly standardized and isn't issued by
default from 3rd party software in their standard configurations.
Encourage users to use the more powerful SET_GCODE_OFFSET command.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-10 14:23:10 -05:00
Kevin O'Connor 6d0c55b6c1 extruder: Initial support for "smoothed pressure advance" 
Support averaging the extruder position over a time range to "smooth
out" the velocity changes that occur during pressure advance.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-21 13:18:19 -05:00
Kevin O'Connor 0bfb655f66 query_adc: Add a new module to help query and debug analog pins 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-07 19:28:27 -05:00
Kevin O'Connor 29b5961d9f docs: Note gcode_arcs and firmware_retraction commands in G-Codes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-07 15:44:25 -05:00
Nils Schulte 27717440aa docs: Update Sensorless_Homing.md with new TMCs (#1958) 
Signed-off-by: Nils Schulte <git@nilsschulte.de>
 2019-10-03 17:56:40 -04:00