Some users may not desire this behavior and others
may wish to initialize to a profile not named default.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
The pca9685_pwm set_pwm() code can be called from a background thread
(when the pin controls a heater). Propagate updates to the main
thread for enable tracking.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Sort using comparison on only first item in list to avoid greater/less
than comparison of stepper objects (which causes an error on Python3).
Reported by discourse user salbang.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
If note_kinematic_activity() has a time far in the future it could
result in a single flush attempt of that time range. Be sure to break
up that range into small chunks using the normal _update_move_time()
mechanism.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
It was possible a note_kinematic_activity() call could increase
last_kin_move_time, but _process_moves() could reset it. Fix by
making sure _process_moves() only ever increases last_kin_move_time.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Issue specific to Python 3, NoneType is being used to compare heartbeat time (actually caused by invalid condition operator), and by returning NoneType in timer functions.
Signed-off-by: Clifford Roche <clifford.roche@gmail.com>
Existing code uses very restrictive build volume constraint checking
with just narrow cone on top of fully cylinder for delta printers.
Code here implements more permissive and still safe build volume
constraint checks.
Signed-off-by: Jan Herich <jan.herich@gmail.com>
Make all the microstep lookup table registers configurable via the
config file. It also loads the default values.
TMC220x and TMC2660 do not support this feature.
Signed-off-by: Alex Voinea <voinea.dragos.alexandru@gmail.com>
Current Z_OFFSET_APPLY_ENDSTOP command only works for printers
with cartesian architecture which have separate Z axis defined.
But this functionality (persisting Z babystep value to endstops)
is exactly as convinient for delta printers, therefore this
PR implements it.
Signed-off-by: Jan Herich <jan.herich@gmail.com>
add G17, G18 and G19 commands to select arc planes
enhance G2/G3 to support arc moves in XY, XZ and YZ planes
Signed-off-by: Andrew Mirsky <andrew@mirsky.net>
After a G28 z-axis homing, there is a final z hop.
It was hoping to height z_hop as an absolute z height rather than relative.
If the z-axis home leaves the head at a z height higher than z_hop,
e.g. because you were using a probe to do z homing,
this meant that it was z hopping in the negative z direction, which
could result in crashing the toolhead.
Signed-off-by: Joshua Redstone <redstone@gmail.com>
This will hide features in the Klipper Display menu that isn't applicable
for the machine, therefore we can add extra alignment tools in the Control
menu as well.
Also conditionally displays Setup/Calibration options.
Signed-off-by: Nickolas Grigoriadis <nagrigoriadis@gmail.com>
According to ADXL345/ADXL343 datasheets, at 3.3V supply voltage,
which is most frequent in the various boards, the sensitivity of
X and Y axes changes to 265 LSB/g from 256 LSB/g at 2.5V.
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
If a maximum acceleration is changed between two consecutive moves,
this allows to correctly compute the junction velocity between them.
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
This adds a gcode command that can be used insight the slicer to pass the total layer count and current layer information.
Signed-off-by: Stefan Dej <meteyou@gmail.com>
M105 expects get_temp method. Module crashes when gcode_id parameter
is set and M105 called. Add methods as hotfix.
Signed-off-by: Robert Pazdzior <robertp@norbital.com>
Introduce a new handle_fault() method to handle processing of sensor
faults. This simplifies the calc_temp() methods.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Send the fault information explicitly in the query_thermocouple fault
field for max6675, max31855, and max31865.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
If a tmc driver can't find the stepper config section it reports a
"missing microsteps" error which can be confusing. Provide a more
explicit error message.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Added a SET_DIGIPOT command to the mcp4018 implementation.
Previously the mcp4018 was read only, and set at the time of
configuration. This allows you to change the value during a
print, which is needed for some older printers that need to
lower the stepper current during preheating.
Signed-off-by: Jake Bordens <jake@allaboutjake.com>
Also added status report for extruder_stepper objects with the
current pressure advance parameters values.
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
Removes a call to gcmd.respond_info which writes 'VARIABLE SAVED' to the
console every time the SAVE_VARIABLE command is called.
Signed-off-by: Andre LeBlanc <mapleleafmakers@gmail.com>
Raised from issue #5645, UTF-8 encoded symbols or other unexpected symbols on the UART raise an exception which causes klipper to stop. This change support UTF-8 encoded characters (from file names) as well as ignoring unexpected bytes.
Signed-off-by: Clifford Roche <clifford.roche@gmail.com>
Pedro Lamas