e786748f18
heaters: Always register heater pin as a pwm pin
...
There's no need to sometimes register the pin as a 'digital_out' pin
instead of as a 'pwm' pin.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-15 12:21:04 -05:00
0bebdf11c2
config: Add example printer-twotrees-sapphire-plus-2020.cfg config
...
Signed-off-by: Pranas Kiziela <pranas.kiziela@gmail.com>
2020-12-15 08:52:24 -05:00
77add95675
heaters: add last pwm value to heater.get_status ( #3621 )
...
Signed-off-by: Stefan Dej <meteyou@gmail.com>
2020-12-13 20:08:16 -05:00
43a6d18f13
docs: Fix board_pins link in Config_Changes.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-13 12:36:14 -05:00
0923450286
tmc: Use configfile note_valid=False when inspecting stepper step_distance
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-13 10:42:25 -05:00
14fd40e3f9
safe_z_home: Use configfile note_valid=False when inspecting z position_max
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-13 10:42:25 -05:00
b25520795d
probe: Use configfile note_valid=False when inspecting z position_min
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-13 10:42:25 -05:00
89183edbda
manual_probe: Use configfile note_valid=False when inspecting Z position_endstop
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-13 10:41:40 -05:00
65a49d17dd
hd44780: Make the 4-bit init sequence more robust
...
The previous init sequence relied on the display ignoring commands if
they are sent faster than 40us. Some displays may not have this
limit.
Rework the init to make it more robust to command transmission times.
The new init should still transition the display into 4-bit mode even
if the display processes commands faster than 40us.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-12 10:07:53 -05:00
2d6b44152a
bltouch: Recommend using a pullup on the sensor_pin
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-11 11:01:44 -05:00
f3c5be0f00
gpiocmds: Merge digital output and soft pwm code
...
The digital output commands implement a subset of the software pwm
commands. Change the host code to just use the software pwm commands
and simplify the micro-controller code.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-10 12:06:26 -05:00
41a41881f7
ci-build: Report binary size during build tests
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-10 12:06:26 -05:00
a1baefc2c2
temperature_mcu: Add enhanced support for monitoring mcu temperature
...
Add a "temperature_mcu" tool that can monitor builtin micro-controller
temperature sensors.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-10 02:39:06 -05:00
39a04eac5f
stm32: Only use the HSI48 clock when doing "usb clock recovery"
...
The HSI48 clock on the stm32f042 isn't as accurate as the main HSI
clock. So, only use the HSI48 clock when using USB to synchronize
that clock.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-08 09:00:47 -05:00
6bbfc869a1
docs: Improve spi and i2c description in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-08 08:53:18 -05:00
6fe2ee0380
docs: Minor wording change to thermistors in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-07 12:12:21 -05:00
e83801daab
heaters: Add a TEMPERATURE_WAIT command
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-07 09:57:13 -05:00
d339839a91
graphstats: Allow graphing of temperature_sensor logs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-07 09:53:24 -05:00
c4a37756ea
temperature_sensor: Report temperature in stats
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-06 21:55:26 -05:00
654cbeb286
docs: Group temperature sensors together in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-05 18:16:20 -05:00
fc8ac8fe25
docs: Move micro-controller information together in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-05 14:39:37 -05:00
9e293be5e0
pca9685: Use move queue for pwm updates
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-04 16:10:13 -05:00
19a96346a8
gpiocmds: Use move queue for software pwm
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-04 16:10:13 -05:00
9cdf9bb6ec
gpiocmds: Use move queue for digital output pins
...
Signed-off-by: Pascal Pieper <accounts@pascalpieper.de>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-04 16:10:13 -05:00
e8ec1801ff
pwmcmds: Use move queue for hard PWM
...
Signed-off-by: Pascal Pieper <accounts@pascalpieper.de>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-04 16:10:13 -05:00
99fe290753
mcu: Support reserving move queue slots
...
Signed-off-by: Pascal Pieper <accounts@pascalpieper.de>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-04 16:10:13 -05:00
697412d25c
stepper: Use a reusable interface to the "move queue"
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-04 16:10:13 -05:00
3b9412513e
basecmd: Change "move queue empty" error to "move queue overflow"
...
Use a more clear error message.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-04 16:10:13 -05:00
086f0fafde
gpiocmds: Send soft pwm cycle_time separately from schedule_soft_pwm_out
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-04 16:10:13 -05:00
7b28cdbae5
pru: Disable gpio mux configuration code
...
The code isn't actually capable of altering the mux registers due to
hardware checks enforced by the chip. Disable that code to save a few
bytes in the final binary.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-04 16:10:13 -05:00
21a3a8559d
docs: Add indentation to generated table-of-contents on klipper3d.org site
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 19:24:40 -05:00
1f9516ad7f
docs: Simplify javascript link modification for external references
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 18:44:31 -05:00
14952ccef5
docs: Add links to default display.cfg and menu.cfg in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 18:11:29 -05:00
6e48ee537f
docs: Fix "github pages" rendering of pictures in Resonance_Compensation.md
...
The "github pages" service wont properly render a table with
"|:--:|:--:|" and no table contents. In contrast, normal github
markdown contents wont show the table without it. For now, remove the
line as the normal github markdown contens look okay even if the
content isn't rendered as a table.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 15:27:38 -05:00
1f2d9c051c
docs: Use relative links for files outside the docs/ directory
...
Use javascript to fixup the "github pages" rendering of links to files
outside the docs/ directory. Then use normal relative links in the
documentation.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 15:06:58 -05:00
a2d1e03b91
docs: Yet again try to fix github-pages rendering of Command_Templates.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 12:41:47 -05:00
23f547169c
rpi_temperature: Don't read min_temp/max_temp directly from config
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 12:37:56 -05:00
b911db4c0d
rpi_temperature: New module to monitor RPi temperature ( #3587 )
...
Module to monitor RPi cpu temperature
Signed-off-by: Al Crate <aleph@al3ph.org>
2020-12-03 12:35:37 -05:00
a1ae548766
docs: Fix github-pages rendering of Command_Templates.md (again)
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 12:28:35 -05:00
5ddb093421
docs: Fix github-pages error in Command_Templates.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 12:27:02 -05:00
d7053f6e71
save_variables: Support saving variables to a disk file
...
Signed-off-by: Dushyant Ahuja dusht.ahuja@gmail.com
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-03 12:19:47 -05:00
91de1560a7
menu: modifications ( #3262 )
...
- remove lot of helper methods
- differentiate class instantiate from config or directly
- don't use 'enable' template rendering when static value is used.
- new element 'disabled'
- other internal adjustments
Signed-off-by: Janar Sööt <janar.soot@gmail.com>
2020-12-03 10:46:55 -05:00
422386e94c
docs: Clean up example values in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-02 08:44:37 -05:00
d42930e232
docs: Update Command_Templates.md to note printer.controller_fan.speed
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-01 12:51:49 -05:00
1f4c52e7db
serialhdl: Improve Python3 compatibility
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-01 12:40:13 -05:00
a4f7ad9ffc
heater_fan: Fix typo causing excessive cpu usage
...
Commit error introduced in a7e90504f261a468
2020-12-01 12:31:22 -05:00
f261a4688b
controller_fan: Improve timing of fan commands
...
Don't use the reactor eventtime to schedule micro-controller commands
as that time may have low accuracy.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-01 11:51:29 -05:00
a7e9050439
heater_fan: Improve timing of fan commands
...
Don't use the reactor eventtime to schedule micro-controller commands
as that time may have low accuracy.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-01 11:51:24 -05:00
f90fbb56d2
input_shaper: Simplify input shaper type reporting
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-01 11:36:37 -05:00
6ead8dd9d9
lm75: Start temperature measurements from "klippy:connect" callback
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-01 11:36:37 -05:00
Kevin O'Connor