1ff0a5494a
stm32: Check for CONFIG_HAVE_BOOTLOADER_REQUEST in dfu_reboot.c
...
Support disabling dfu_reboot if HAVE_BOOTLOADER_REQUEST is disabled in
the Kconfig rules.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-30 21:28:32 -05:00
b51b068442
avr: No need to define bootloader_request()
...
Since avr does not define HAVE_BOOTLOADER_REQUEST it is not necessary
to define the function.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-30 21:28:32 -05:00
c620f4836e
canserial: Only call bootloader_request() if CONFIG_HAVE_BOOTLOADER_REQUEST
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-30 21:28:32 -05:00
34fd3f41ea
usb_cdc: Only call bootloader_request() if CONFIG_HAVE_BOOTLOADER_REQUEST
...
Check for the build symbol prior to calling bootloader_request().
Enable the build symbol on rp2040, atsam, and atsamd chips.
This also enables serial bootloader requsts on rp2040, atsam, and
atsamd.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-30 21:28:32 -05:00
806cf233ec
stm32: Include "misc.h" in stm32l4.c and stm32g4.c
...
Include for bootloader_request() definition.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-30 21:28:32 -05:00
4ca1e5f670
serial_irq: Rename SERIAL_BOOTLOADER_SIDECHANNEL to HAVE_BOOTLOADER_REQUEST
...
Rename the build symbol. This is in preparation for enabling
HAVE_BOOTLOADER_REQUEST on usb and canbus.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-30 21:28:32 -05:00
4753315601
Kconfig: No need to specify "default n" in main Kconfig file
...
A "bool" option already defaults to "n" so no need to state that
explicitly.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-30 21:28:32 -05:00
9b60daf62d
tmc: Configurable microstep lookup table ( #5920 )
...
Make all the microstep lookup table registers configurable via the
config file. It also loads the default values.
TMC220x and TMC2660 do not support this feature.
Signed-off-by: Alex Voinea <voinea.dragos.alexandru@gmail.com>
2022-12-21 21:23:23 -05:00
aac613bf44
scripts: support CanBoot on RP2040 in flash_usb.py
...
Signed-off-by: Chris Lee <clee@mg8.org>
2022-12-19 15:42:53 -05:00
f078a27905
manual_probe: Add Z_OFFSET_APPLY_ENDSTOP for delta
...
Current Z_OFFSET_APPLY_ENDSTOP command only works for printers
with cartesian architecture which have separate Z axis defined.
But this functionality (persisting Z babystep value to endstops)
is exactly as convinient for delta printers, therefore this
PR implements it.
Signed-off-by: Jan Herich <jan.herich@gmail.com>
2022-12-19 13:14:06 -05:00
8621ebbed2
bed_mesh: Allow bedmeshing at 1mm spaced intervals ( #5918 )
...
Signed-off-by: Keyan Mobli <keyan@kmobli.com>
2022-12-19 11:14:45 -05:00
4af8786587
stm32: Move dfu reboot logic to new dfu_reboot.c file
...
Move the stm32 DFU reboot logic to a new dfu_reboot.c file. This
simplifies the per-chip code.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-18 19:50:08 -05:00
b6cd77f6e3
stm32: Separate out USB DFU reboot logic in stm32l4.c
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-18 19:50:08 -05:00
be74c72555
stm32: Separate out USB DFU reboot logic in stm32g4.c
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-18 19:50:08 -05:00
2a25733cd8
screws_tilt_adjust: Add get_status() method ( #5921 )
...
Signed-off-by: Christopher Meredith <chmeredith@gmail.com>
2022-12-17 11:39:25 -05:00
3c1ed3bb27
initial_pins: Add check to reduce compile time size when not in use
...
Add a check to the start of initial_pins_setup() to make it easier for
gcc to optimize the code if it is not in use.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-16 22:46:47 -05:00
0c43ae1fd4
stm32: Just clean dcache instead of disabling on stm32h7 dfu reboot
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-16 17:29:45 -05:00
02b45c91fb
armcm_reset: Flush dcache before rebooting into canboot
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-16 17:26:41 -05:00
b0d9cbfb4b
stm32: Fix usb build on stm32g0b0
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-15 18:43:25 -05:00
7d1df81e5e
stm32: Fix USB support on stm32g0b1
...
A typo in commit e33b41ab
2022-12-15 11:44:12 -05:00
41c7bb818f
test: Add compile test builds for stm32g431, stm32h723, stm32l412
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-15 11:27:28 -05:00
ac090d9d52
stm32: Fix stm32l4 build
...
Commit c5d56f44
2022-12-15 11:27:19 -05:00
f31540b357
stm32: Minor changes to stm32g0b0 ifdefs
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-15 10:27:51 -05:00
e33b41abaa
stm32g0: add stm32g0b0 support
...
Signed-off-by: Alex Voinea <voinea.dragos.alexandru@gmail.com>
2022-12-15 10:05:43 -05:00
9d668d63a7
stm32: Rework usb_reboot_for_dfu_bootloader() so it works on stm32h723
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-15 09:52:21 -05:00
f6199ef613
config: Update generic-bigtreetech-octopus.cfg for f429 and h723 chips
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-15 09:50:01 -05:00
fe0fc29616
rp2040: Move watchdog code to new watchdog.c file
...
Move the watchdog code to its own file so that it is easier to disable
it for development builds.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-14 19:21:25 -05:00
9b342c65c8
armcm_link: Rename CONFIG_FLASH_START to CONFIG_FLASH_APPLICATION_ADDRESS
...
Rename the build symbol name for better clarity on what it represents.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-14 18:44:07 -05:00
dc94a35752
lpc176x: Fix lpc176x build
...
Fix build error introduced in commit 6ba2c3e1
2022-12-14 14:50:31 -05:00
d40ebdab06
canbus: Rename canserial_send() to canbus_send()
...
Rename canserial_send() to canbus_send() and canserial_set_filter() to
canbus_set_filter(). This makes it more clear where the code should
reside.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-14 14:25:21 -05:00
52a6bed24e
canbus: Rename canbus_send() to canhw_send()
...
Rename canbus_send() to canhw_send() and rename canbus_set_filter() to
canhw_set_filter(). This makes it more clear where the code should
reside.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-14 14:15:14 -05:00
e16a693b1e
rp2040: Fix copy-paste error in Kconfig comment
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-14 13:34:15 -05:00
6ba2c3e1d1
lpc176x: Use "Bootloader offset" prompt in "make menuconfig"
...
Use the same bootloader offset terminology that is used with other
chips (eg, stm32).
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-14 13:29:39 -05:00
347dfa58ea
gcode_arcs: Allow either one of I, J, K to be default-zero on G2/G3 ( #5939 )
...
Signed-off-by: Wijnand Modderman-Lenstra <maze@pyth0n.org>
2022-12-14 12:06:11 -05:00
69f76b3b66
stm32: Apply race fixes to stm32h7_adc.c
...
Improve handling of race conditions with hardware updates. This is
the same changes applied to stm32f0_adc.c in commit 88325b6c
2022-12-12 23:46:49 -05:00
201f715b55
save_variables: Verify filename path is writeable at startup
...
Signed-off-by: Justin Schuh <code@justinschuh.com>
2022-12-11 21:07:47 -05:00
ba365aff96
gcode_arcs: No need to import gcode module to access Coord()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-11 20:59:02 -05:00
0c5c87d7c0
gcode_arcs: support XY, XZ and YZ planes
...
add G17, G18 and G19 commands to select arc planes
enhance G2/G3 to support arc moves in XY, XZ and YZ planes
Signed-off-by: Andrew Mirsky <andrew@mirsky.net>
2022-12-11 20:55:59 -05:00
c7f323e863
stm32g0: Do not disable SWD by accident
...
Keep SWEN as 1 in FLASH->ACR register such
that the SWD interface doesn't get disabled.
Signed-off-by: Alex Voinea <voinea.dragos.alexandru@gmail.com>
2022-12-11 20:09:50 -05:00
0972561783
stm32g4: Do not disable SWD by accident
...
Keep SWEN as 1 in FLASH->ACR register such
that the SWD interface doesn't get disabled.
Signed-off-by: Alex Voinea <voinea.dragos.alexandru@gmail.com>
2022-12-11 20:09:50 -05:00
516fdae2b7
linux: add 'GPIOI' for linux process ( #5926 )
...
Signed-off-by: Alan.Ma from BigTreeTech tech@biqu3d.com
2022-12-11 20:07:58 -05:00
03006f5ca3
config: printer-artillery-sidewinder-x2-2022.cfg
...
Minor fix. The screw labels "back left" and "back right"
where swapped in [screws_tilt_adjust] section.
Signed-off-by: Frank Roth <developer@freakydu.de>
2022-12-11 19:53:42 -05:00
336cc92a0a
parsedump: Support running on both python2 and python3
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-07 14:31:03 -05:00
a42f615881
stm32: add STM32H723 support
...
Signed-off-by: Chen.BJ from BigTreeTech chenbj@biqu3d.com
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-02 13:55:23 -05:00
50b2e2e67e
lib: update lib/stm32h7 to v1.9.0 for stm32h723
...
Signed-off-by: Chen.BJ from BigTreeTech chenbj@biqu3d.com
2022-12-02 13:26:02 -05:00
c5d56f4438
stm32g4: implement build,usb,can,i2c,spi,serial,adc.
...
Signed-off-by: Matt Baker <baker.matt.j@gmail.com>
2022-12-02 11:31:42 -05:00
9ab367d813
stm32g4: add lib from stm32cubeg4 v1.4.0
...
Signed-off-by: Matt Baker <baker.matt.j@gmail.com>
2022-12-02 11:31:42 -05:00
a1de69e39b
corexz: Multiple steppers per axis on CoreXZ
...
Allowing multiple steppers per axis.
Signed-off-by: Vecter Fang <vecterfang@icloud.com>
2022-12-02 11:25:55 -05:00
e02b725602
docs: Note the release of v0.11.0
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-11-28 21:27:09 -05:00
817339a4ef
docs: Add a note about hardware independence to Features.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-11-28 21:14:11 -05:00
Kevin O'Connor