Commit Graph

864 Commits

Author SHA1 Message Date
dahliamoth 6273d7e05d
config: Added printer config for SUNLU T3 (#6004)
Signed-off-by: Zachary Welvaert <zwelvaert@gmail.com>
2023-01-30 10:46:51 -05:00
Evan Cowden 0407c24c78
config: Duet3-6HC & -6XD Configs (#6006)
Signed-off-by: Evan Cowden <evan38109@gmail.com>
2023-01-25 15:28:53 -05:00
Stas Yakobov b337cc3ee8
config: Added precise location of [bed_screws] for Ender-3-s1 (#5944)
Signed-off-by: Stas Yakobov <stas@3os.org>
2023-01-02 15:22:46 -05:00
Kevin O'Connor f6199ef613 config: Update generic-bigtreetech-octopus.cfg for f429 and h723 chips
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-12-15 09:50:01 -05:00
Frank Roth 03006f5ca3 config: printer-artillery-sidewinder-x2-2022.cfg
Minor fix. The screw labels "back left" and "back right"
where swapped in [screws_tilt_adjust] section.

Signed-off-by: Frank Roth <developer@freakydu.de>
2022-12-11 19:53:42 -05:00
Bradley Methorst 3fb984e152
config: Create printer-anet-a8-2019.cfg (#5902)
Added config for Anet A8 2019 (Plus model)

Signed-off-by: Bradley Methorst <bradley-methorst@outlook.com>
2022-11-15 13:56:14 -05:00
Kevin O'Connor d883c57d77 config: Rename printer-geeetech-301.cfg to printer-geeetech-301-2019.cfg
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-11-14 11:30:27 -05:00
Kevin O'Connor 6be0ba78ae config: Remove filament specific settings from printer-geeetech-301.cfg
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-11-11 14:12:20 -05:00
Peter Gruber 0233dd32cc
config: create config for Geeetech 301 (#5830)
Create a working config for the Geeetech 301 printer.

Signed-off-by: Peter Gruber <gruberp@googlemail.com>
2022-11-11 14:08:19 -05:00
freakyDude ebc3b0def3
config: Add Artillery Sidewinder X2 2022 stock printer.cfg (#5810)
Works for unmodified stock Artillery Sidewinder X2, 
year 2022 with Artillery Ruby v1.2 mainboard. 
All by default connected things are working fine.

Build firmware with architecture STM32F401 with "No bootloader". 
Other settings keep ther defaults

Signed-off-by: Frank Roth <developer@freakydu.de>
2022-10-21 21:03:57 -04:00
Kevin O'Connor eb9cda91b5 config: Update duet3 mini config to recommend compiling for SAME54P20
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-10-13 11:32:43 -04:00
BIGTREETECH c51e87c11c
config: Add BigTreeTech Manta M4P & M8P board (#5812)
Signed-off-by: Alan.Ma from BigTreeTech <tech@biqu3d.com>
2022-10-13 11:08:44 -04:00
Apulo 7290c14531
config: Update generic-th3d-ezboard-lite-v2.0.cfg (#5785)
Corrected the build instructions for the TH3D EZBoard V2 to include the command to convert Klipper.elf to a SREC bin format named firmware.bin. The SREC format is required for the bootloader installed on the board.

Signed-off-by: Anthony Dellett <anthony.dellett@gmail.com>
2022-10-06 11:16:13 -04:00
Fisheiyy 7527e57e5a
config: Add Ender 3 S1 Plus (#5705)
Signed-off-by: Rob Casper <myallneedsemail@gmail.com>
2022-09-16 12:06:49 -04:00
Fisheiyy ee5bdbadd1
config: Fix Ender 3 S1 Config (#5771)
Signed-off-by: Rob Casper <myallneedsemail@gmail.com>
2022-09-11 22:16:24 -04:00
JackyHe398 721c764746
Update printer-anycubic-vyper-2021.cfg (#5692)
* Update printer-anycubic-vyper-2021.cfg

better pause and end print, beeper support, mroe accurate value.

* Update printer-anycubic-vyper-2021.cfg

* Update printer-anycubic-vyper-2021.cfg

* Update printer-anycubic-vyper-2021.cfg

* Update printer-anycubic-vyper-2021.cfg

delete unnecessary gcode

* Update printer-anycubic-vyper-2021.cfg

remove unneccessary part.

* Update printer-anycubic-vyper-2021.cfg

* Update printer-anycubic-vyper-2021.cfg

according to https://www.klipper3d.org/Example_Configs.html point 7f
delete field values that are set to their default value

* Update printer-anycubic-vyper-2021.cfg

small change

* Update printer-anycubic-vyper-2021.cfg
2022-09-11 22:12:06 -04:00
JamesH1978 6ba0242900
config: Fix uart_address on BTT SKR CR6 (#5741)
As found on discord bt user David Carey.

uart_address for y and z are swapped. Discovered while setting up sensorless homing.

Signed off by: James Hartley <james@hartleyns.com>
2022-09-03 12:19:50 -04:00
jake-b ae6c16422f
mcp4018: Add SET_DIGIPOT command to mcp4018 implementation (#5737)
Added a SET_DIGIPOT command to the mcp4018 implementation.
Previously the mcp4018 was read only, and set at the time of
configuration.  This allows you to change the value during a
print, which is needed for some older printers that need to
lower the stepper current during preheating.

Signed-off-by: Jake Bordens <jake@allaboutjake.com>
2022-09-02 10:30:06 -04:00
Tircown 354915d2ad
kinematics: Add deltesian printers (#5743)
Initial push of the working deltesian kinematics after some successful tests.

Signed-off-by: Fabrice GALLET <tircown@gmail.com>
2022-09-01 15:56:31 -04:00
Rui Carmo b1dcd35b7a
config: Add BQ Hephestos printer (#5676)
This is a working config with full LCD and stepper settings (only thing missing is the kill switch, which did not appear to work)

Signed-off-by: Rui Carmo <rui.carmo@gmail.com>
2022-08-19 13:57:18 -04:00
int_0x03 20a28bc00f
config: Anycubic 4 Max Pro 2.0 - Added two internal systems (beeper and PSU control). (#5629)
Signed-off-by: Usachev Alexander Valer'evich <int_0x21@protonmail.com>
2022-08-19 13:11:42 -04:00
Kevin O'Connor a709ba43af Revert "config: Create printer-bq-hephestos-2014.cfg (#5607)"
This reverts commit 18119858c6.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-29 14:52:22 -04:00
Rui Carmo 18119858c6
config: Create printer-bq-hephestos-2014.cfg (#5607)
This is a working config with full LCD and stepper settings (only thing missing is the kill switch, which did not appear to work)

Signed-off-by: Rui Carmo <rui.carmo@gmail.com>
2022-07-29 14:48:58 -04:00
Kevin O'Connor 3387a9c23d config: Use printer-creality-ender3-s1-2021.cfg for both s1 and s1 pro.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-24 08:49:25 -04:00
Kevin O'Connor 407be177d5 config: Fix wording of serial port selection on recent creality configs
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-21 21:56:46 -04:00
S1NH 0c74b3d8bf
config: Integrate configuration file for Creality Sermoon V1. (#5621)
Configuration for the stock Creality Sermoon V1.

Signed-off-by: Du Chengyao <hbyls@live.com>
2022-07-21 21:45:05 -04:00
Kevin O'Connor e9c83d66e0 config: Fix screw typo in printer-creality-cr10-v3-2020.cfg
Reported by @TonyRouse.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-19 13:46:50 -04:00
JamesH1978 dd03cca49b
config: Change of alias for heater_fan in multiple configs (#5632)
This PR serves to fix a longstanding misnomer in some config files. Many configs state a nozzle_cooling_fan alias for what is usually a "hotend cooling fan". This causes ambiguity and confusion with the parts fan. I have identified all 24 files with this and changed them here.

Signed-off-by: James Hartley <james@hartleyns.com>
2022-07-19 13:02:51 -04:00
Pedro Lamas 6be114d728 docs: fix rawparams example by truncating comments
Signed-off-by: Pedro Lamas <pedrolamas@gmail.com>
2022-07-19 12:48:16 -04:00
Kevin O'Connor 50b4d4c43c config: Note 25Mhz clock in generic-bigtreetech-skr-3.cfg
Reported by @kingtricky and confirmed by @bigtreetech.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-07-19 12:44:18 -04:00
Cabia Rangris 24a1b50e51
config: Added Anet alt-wiring display example (#5605)
Signed-off-by: Vladimir Serov <cab404@mailbox.org>
2022-07-06 15:56:02 -04:00
Kevin O'Connor 4404c98637 test: Add printer-biqu-b1-se-plus-2022.cfg to printers.test
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-29 18:10:47 -04:00
Bruno Melo e952b021e8
config: Create printer-biqu-b1-se-plus.cfg (#5477)
Signed-off-by: Bruno Melo <brunomelo81@gmail.com>
2022-06-29 18:07:26 -04:00
Kevin O'Connor e98a29bef3 config: Minor comment changes to printer-creality-cr10-v3-2020.cfg
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-16 10:56:30 -04:00
CoreRasurae 31f9bbf105
config: Creality CR10 v3 with BLTouch support config. (#5533)
Introduce support for the stock Creality CR10 v3 printer, including the filament runout sensor. It also supports the optional BLTouch.

Signed-off-by: Luís Palma Nunes Mendes <luis.p.mendes@gmail.com>
2022-06-16 10:54:38 -04:00
Stefan Dej c61db45613 config: fix processor name in th3d ezboard lite v2.0 config
Signed-off-by: Stefan Dej <meteyou@gmail.com>
2022-06-16 10:48:28 -04:00
Devin Fritz 29e9ac6ec5
config: Update generic-duet3-mini.cfg to include Tacho pins (#5551)
Signed-off-by: Devin Fritz <devinfritz@gmx.de>
2022-06-12 13:03:50 -04:00
Aart Röst c30e5f847c
config: Correct UART pins for Ender 3 S1 & S1 Pro (#5553)
Signed-off-by: Aart Röst <aartrost@gmail.com>
2022-06-10 14:13:10 -04:00
Frank Tackitt 638cd4d781 docs: add exclude_object documentation
Also include sample macros to add M486 compatibility.

Signed-off-by: Franklyn Tackitt <git@frank.af>
Co-authored-by: Troy Jacobson <troy.d.jacobson@gmail.com>
2022-06-03 14:12:04 -04:00
Kevin O'Connor df39465534 config: Rename sample-huvud-v0.61.cfg
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-03 11:43:34 -04:00
Charles Pickering 79d6b37ac9 config: Huvud KlipperToolhead config
Pin information and basic flashing instructions for the Huvud CAN bus toolhead board. V0.61

Signed-off-by: Charles Pickering <me@charlespick.xyz>
2022-06-03 11:43:09 -04:00
Kevin O'Connor 742df16a51 config: Update ender3 s1 configs to use gear_ratio
The gearing mechanism is 42:12.  Reported by @filipenobrerc.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-06-03 11:33:39 -04:00
BIGTREETECH dbc24ce339
config: Add BTT SKR 3 & EBB CAN V1.0 & V1.1 board cfg (#5529)
Signed-off-by: Alan.Ma from BigTreeTech <tech@biqu3d.com>
2022-06-01 11:28:10 -04:00
Kevin O'Connor 5a94764c38 config: Minor changes to ender3-s1 and ender3-s1pro configs
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-23 15:27:17 -04:00
Fisheiyy 00934e1378
config: Ender 3 S1/S1 Pro Default Configurations (#5332)
Signed-off-by: Rob Casper <myallneedsemail@gmail.com>
2022-05-23 15:23:22 -04:00
kluoyun 4490a58411
config: Create configuration file for Fly-Gemini-v2 and Fly-CDY-V3 motherboard (#5508)
Signed-off-by: Xiaokui Zhao <xiaok@zxkxz.cn>
2022-05-18 12:28:23 -04:00
Kevin O'Connor 996b73e25d config: Remove hold_current from generic-th3d-ezboard-lite-v2.0.cfg
We no longer recommend setting a hold_current.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-05-17 21:22:51 -04:00
kluoyun defce11235
config:Create configuration file for Fly-Gemini-v1 motherboard (#5474)
Create configuration file for Fly-Gemini-v1 motherboard

Add stm32f405 and generic-mellow-fly-gemini-v1.cfg to test cases

Signed-off-by: Xiaokui Zhao <xiaok@zxkxz.cn>
2022-05-14 10:36:10 -04:00
Adrian Keet d9daeb0803 config: Pull up endstop_pins on Fysetc S6/Spider
Signed-off-by: Adrian Keet <arkeet@gmail.com>
2022-04-26 20:53:14 -04:00
JamesH1978 a829a4c93f
printer-creality-ender3pro-2020: Update info on chip types (#5445)
Added flash info that some Ender 3 Pro's shipped in 2022 have the GD32F103 chip

Signed-off-by: James Hartley <james@hartleyns.com>
2022-04-23 21:25:07 -04:00
Kevin O'Connor a10b2805de config: Fix incorrect pin in printer-monoprice-select-mini-v2-2018.cfg
Reported by @bkw777.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-04-23 21:16:09 -04:00
laurienzu 4c8d1b813c
config: Updated and created new TwoTrees configs to avoid confusion (#5365)
* Update and rename printer-twotrees-sapphire-pro-2020.cfg to printer-twotrees-sapphire-pro-sp-3.cfg

I renamed the file since the printer name now changed and is sold with this name, there is only one version so year can be removed.

-Added detailed instructions for flashing in the header.
-Corrected rotation distances for axes, it was wrong.
-Added gear ratio for extruder that is useful for future changes.
-Added heater fan to HE1 pins for automatic shutdown with temp.
-Reduced speed and accel for Z since a 2mm screw is used.

* Create printer-twotrees-sapphire-plus-sp-5-v1.1.cfg

I created the file since the printer name now changed and is sold with this name, there are 2 main versions (V1 and V1.1) so I will make 2 different configs for them since there are some hardware change and people are confused in what to change.

The difference with V1 is that all 2225 drivers are now used, since microsteps tables change for these drivers and by factory all jumpers are in the microstep setting is 32, people don't know this and will have half movement with the v1 config, there is a lot of confusion in communities so I think adding another file is the best option.

Signed-off-by:  Lorenzo Cascone <laurienzudesign@gmail.com>
2022-04-13 11:07:13 -04:00
iblue 40c2d11ef8
config: Add config for CR-10 Smart Pro, including installation instructions (#5396)
The pinout was found by windowpainting, initial config by Subwooferbone, tweaked by iblue.

Signed-off-by: Markus Fenske <iblue@gmx.net>
2022-04-07 11:59:04 -04:00
SyrasX 3e0c0e9ccf
config: Added Config for Creality Ender 5 Pro 2020 (#4836)
Signed-off-by:  Maxim Schessler <maxim.schessler@gmail.com>
2022-03-18 20:42:15 -04:00
Spencer Owen 743c766f47
config: Adds Ender 2 Pro config (#5359)
Adds a default config for Ender 2 Pro. Printer uses creality 4.2.3 board

Signed-off-by: Spencer Owen <owenspencer@gmail.com>
2022-03-17 20:43:55 -04:00
Apulo 1ccebfce1b
config: generic-th3d-ezboard-lite-v2.0.cfg (#5247)
This file includes the build instructions and generic configuration for the TH3D EZBoard Lite v2.0 3d printer control board.

Signed-off-by: Anthony Dellett <anthony.dellett@gmail.com>
2022-03-14 14:48:22 -04:00
jace c27a9182f3
config: Config for Monoprice Select Mini v1 (#5243)
Signed-off-by: Jace Wiseman <jwiseman@gmail.com>
2022-03-14 14:17:32 -04:00
Ofir Petrushka 5d0d6d5a32
config: Adding bed_screws to Ender 3 (#5252)
Signed-off-by: Ofir Petrushka <ofir.petrushka@gmail.com>
2022-03-14 13:38:05 -04:00
just-trey 352f735297
config: Elegoo Neptune 2 config update (#5213)
Signed-off-by: Trey Wentz <trey.wentz@gmail.com>
2022-03-14 12:50:38 -04:00
Lorenzo 7c964e5fdf
dac084S085: SPI DAC DAC084S085 implementation (#5134)
Alligator Board Rev2 tested config sample.
Add example configuration file for Alligator board rev.3.

Signed-off-by: Lorenzo Franco <lorenzo.franco@lorenzing.com>
2022-02-22 10:28:28 -05:00
Polar-Ted d94d690d67
config: Update printer-tronxy-x5sa-v6-2019.cfg (#5262)
Lines 94 and 97. Fan speed should be 1 and not 0.5
removed lines to use default settings. 

[heater_fan hotend_fan]
pin: PG14

[fan]
pin: PG13

Signed-off-by: Scott Schering <sschering@gmail.com>
2022-02-14 19:17:38 -05:00
joshindc 38220da46b
config: Update printer-wanhao-duplicator-i3-v2.1-2017.cfg (#5261)
Add correct kill_pin for stock Melzi board and LCD.

Signed-off-by: Joshua Whitman <whitmanj@gmail.com>
2022-02-14 19:16:40 -05:00
adelyser c15d38b973
config: Add BIQU BX printer config (#4950)
Signed-off-by: Aaron DeLyser <bluwolf@gmail.com>
2022-01-29 13:31:41 -05:00
Filip Trplan 89b4fecac4
config: Correct Pin for the CR-6 SE 2021 Example Config (#5142)
The fan pin PA0 is not correct for the 2021 revision of the CR-6 SE using the
4.5.3 revision of the Creality board. Changed the pin to PB15 in order to
get it working

Signed-off-by: Filip Trplan <filip@trplan.si>
2022-01-16 14:22:44 -05:00
maze 6e6ad7b520
config: Update generic-mellow-super-infinty-hv.cfg (#4876)
TMC2130/5160 can make use of `spi3`, which is operated on the software SPI pins in the current configuration. The supplied defaults for software SPI do not currently work.

Heater0 pin was marked incorrectly, should be `PB0`

Signed-Off-By: Wijnand Modderman-Lenstra <maze@maze.io>
2022-01-09 21:44:40 -05:00
Paul McGowan de366ee854
docs: Docs comma culture (#4822)
Many non-English speaking countries use a comma as a decimal separator for printed numbers. This can create some confusion in documentation and config files when not surrounded by contextual clues like parenthesis.  Improve documentation by adding spaces to coordinates.

Signed-off-by: Paul McGowan <mental450@gmail.com>
2022-01-09 21:13:53 -05:00
Kevin O'Connor 634ae08df6 config: Minor updates to generic-bigtreetech-skr-pico-v1.0.cfg
Small wording change and add to printer test cases.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-12-27 12:32:12 -05:00
BigTreeTech aa2ede4a8c
config: Add BigTreeTech SKR Pico V1.0 board (#5022)
Signed-off-by: Alan.Ma from BigTreeTech <tech@biqu3d.com>
2021-12-27 12:28:21 -05:00
BigTreeTech a518cfb02f
config: Add BigTreeTech SKR mini E3 V3.0 board (#5040)
Signed-off-by: Alan.Ma from BigTreeTech <tech@biqu3d.com>
2021-12-24 11:33:38 -05:00
gjsmo e7ba140337
config: Add configuration for Modix Big60 printer (#4986)
Signed-off-by: Gabriel Smolnycki <gabjsmo0@gmail.com>
2021-12-15 14:06:29 -05:00
Kevin O'Connor 92c41b8827 config: Remove tmc interpolate setting from example configs
There is no reason to explicitly set the interpolate flag to true in
the example configs as that is already the default.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-12-12 12:44:06 -05:00
Kevin O'Connor dfe9e8f783 config: Don't specify a hold_current in printer-hiprecy-leo-2019.cfg
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-12-12 12:44:06 -05:00
Kevin O'Connor 307462c203 config: Don't specify a hold_current in printer-eryone-er20-2021.cfg
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-12-12 12:44:06 -05:00
Kevin O'Connor bfd098eb19 config: Remove hold_current from sample configs and sample macros
Now that the documentation recommends that hold_current not be set,
update the example config files to not specify a hold_current.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-12-12 12:44:06 -05:00
BigTreeTech 69c0bdefde
config: Add HermitCrab board (#4870)
Signed-off-by: Alan.Ma from BigTreeTech <tech@biqu3d.com>
2021-11-24 09:53:55 -05:00
JamesH1978 4d738c8379
config: add flash details for STM32F429 (#4942)
Updates for generic-bigtreetech-skr-2.cfg to include comment on newly shipped board with STM32F429 instead of the original STM32F407

Signed-off-by: James Hartley <james@hartleyns.com>
2021-11-21 08:06:31 -05:00
Kevin O'Connor c179db3d43 temperature_sensors: Deprecate "NTC 100K beta 3950" thermistor
It seems the common "beta 3950" thermistors generally follow a
temperature table defined by the new "Generic 3950" definition.  Using
a table that actually follows the "beta 3950" temperature curve is
generally less accurate.  Deprecate the existing "NTC 100K beta 3950"
definition to avoid this common issue.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-11-10 18:56:51 -05:00
Kevin O'Connor 6c395fd016 config: Minor updates to printer-tronxy-xy-2-Pro-2020.cfg
Change extruder microsteps to 32.  Add to printers.test regression
test case.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-26 16:11:13 -04:00
gcastle2007 7af59a58cf
config: Tronxy XY-2 Pro default (#4631)
Example default config for Tronxy XY-2 Pro.

It is default config for printer Tronxy XY-2 Pro (mainboard Chitu V6). This config based on config for Tronxy X5SA with mainboard Chitu V6.

Signed-off-by: Konstantin Bazhenin <kby@list.ru>
2021-10-26 16:01:31 -04:00
Kevin O'Connor a33d0697b6 config: Don't use deprecated features in sample-pwm-tool.cfg
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-24 21:42:48 -04:00
Kevin O'Connor 7937678cb3 config: Remove deprecated features from printer-velleman-k8800-2017.cfg
Don't use deprecated default_parameter_x in
printer-velleman-k8800-2017.cfg .

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-10-24 21:41:52 -04:00
creyc 27434128a4
config: Update generic-printrboard.cfg to mention different Y endstop pin on RevF hardware (#4732)
Signed-off-by: Corey Schiller <gitcor@venemo.com>
2021-10-15 11:56:16 -04:00
Arne Schwarck 96ee179e8b
config: Fix typo in Octopus board (#4801)
As suggested in https://github.com/Klipper3d/klipper/pull/4792

Signed-off-by: Arne Schwarck <arneschwarck@gmail.com>
2021-10-13 14:19:18 -04:00
Arne Schwarck f72a2dc1ab
config: Fix diag pins on Octopus board (#4792)
with reference from https://github.com/bigtreetech/BIGTREETECH-OCTOPUS-V1.0/blob/master/Hardware/BIGTREETECH%20Octopus.pdf

Signed-off-by: Arne Schwarck <arneschwarck@gmail.com>
2021-10-13 11:50:56 -04:00
Manuel Fichtner 5d52a3b19f
config: Anycubic Vyper (#4740)
This commit contains a configuration for the Anycubic Vyper printer from 2021.
It uses a clone of the STM32F103 chip named GD32F103.
There are 2 Mainboard versions out there v0.0.5 and v0.0.6, this config has
been tested with the v0.0.6 only. It should probably work for v0.0.5 as well
since there are no different changes in the Anycubic Marlin firmware.
The LCD is not supported yet (might work, but didn't try yet).

Signed-off-by: Marc Neuhaus <marc@neuhaus.nrw>
Signed-off-by: Manuel Fichtner <manuel.fichtner@me.com>
2021-10-11 16:26:14 -04:00
Kevin O'Connor 31ac9dc6f9 config: Fix spi bus comment in generic-duet3-mini.cfg
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-09-26 13:44:45 -04:00
joaobarros 71ba1acebe
config: Add [board_pins] for generic-duet3-mini.cfg (#4705)
Add EXP1 / EXP2 display pins to [board_pins] for the Duet 3 Mini 5+

Signed-off-by: Joao Barros <joao.barros@gmail.com>
2021-09-26 13:43:52 -04:00
joaobarros 42f7845bd9
config: Fix LCDBeep pin on generic-duet3-mini.cfg (#4704)
Signed-off-by: Joao Barros <joao.barros@gmail.com>
2021-09-25 12:23:58 -04:00
Peter Pan's Techland f3d7084bfa
config: add support for creality sermoon D1 printer (#4621)
Signed-off-by: Shi Pan <twinkle-pirate@hotmail.com>
2021-09-25 12:17:02 -04:00
Kevin O'Connor c2d3a1689e config: Remove URLs to github repository
Update URLs to documentation in the github repository to use the
klipper3d.org website.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-09-23 19:45:22 -04:00
Demetrius Apostolopoulos 0b918b357c
config: Minor Eryone Thinker S config fixes. (#4695)
Fixing initial rotation distance on Thinker S stocker extruder
Removing author information
Fixing Z Axis homing speed as it was too fast.

Signed-off-by: Demetrius Apostolopoulos <dapostol73@hotmail.com>
2021-09-21 14:12:58 -04:00
maze 445fed48bd
config: Added the Mellow Super Infinity HV board (#4691)
Signed-off-by: Wijnand Modderman-Lenstra <maze@pyth0n.org>
2021-09-21 14:06:15 -04:00
Kevin O'Connor cd864488a2 config: Fix EXP2_10 alias in generic-bigtreetech-octopus.cfg
Reported by @ShohninDmitriy.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-09-21 13:42:52 -04:00
int_0x03 7a02cde4b7
config: Config for Anycubic 4MaxPro_2.0-2021 (#4557)
This config I created and fully tested on my own printer Anycubic 4Max Pro 2.0. This works fine! Please note that this printer is different from the Anycubic 4MAX.

Signed-off-by: Alexander Usachev <int_0x21@protonmail.com>
2021-09-21 12:56:30 -04:00
truckershitch 9d11b18db5
config: Document motor_power pin in skr2 config (#4677)
This is just a short inline comment about Bigtreetech's implementation of the "anti-reversal stepper protection" and the way it should be handled in the Klipper printer configuration.

Signed-off-by: Jerry Chapman <truckershitch@hambone.e4ward.com>
2021-09-15 18:58:30 -04:00
Pascal af3622544d
docs: Add referenced config example for PWM tools (#4537)
Signed-off-by: Pascal Pieper <accounts@pascalpieper.de>
2021-09-03 18:10:09 -04:00
Kevin O'Connor 9014677cbd test: Add printer-elegoo-neptune2-v1.2-2021.cfg to printers.test
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-08-31 13:12:15 -04:00
wsippel b9116e4a03
config: Elegoo Neptune 2 configuration (#4592)
Signed-off-by: Willie Sippel <wsippel@me.com>
2021-08-31 13:07:33 -04:00
shawnifoley 23bb6fa1f3
config: correct pins for ender3max display (#4516)
Signed-off-by: Shawn Foley <shawnifoley@gmail.com>
2021-08-19 22:18:24 -04:00
Kevin O'Connor c0f97adacc config: Fix missing trailing commas in board_pins config sections
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-08-19 17:10:54 -04:00