d5c72e3693
linux: Fix local timer_repeat_until cache in timer.c
...
Make sure to update the local copy of timer_repeat_until when updating
it.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-18 12:17:00 -04:00
c5f1835bec
config: Add printer-flashforge-creator-pro-2018.cfg to test cases
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-16 13:58:24 -04:00
47f2899e37
config: Config for the flashforge-creator-pro ( #4156 )
...
Signed-off-by: Marc-André Denis <marcadenis@msn.com>
2021-04-16 13:55:42 -04:00
ca1d431653
stepper: Register a config default for calculated homing_positive_dir
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-16 11:42:39 -04:00
dcf6d30aba
config: Updates to printer-tronxy-x5sa-pro-2020.cfg
...
Minor updates to use default values.
Also, add to printers.test test cases.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-16 00:16:09 -04:00
f6cb1d0450
config: Create printer-tronxy-x5sa-pro-2020.cfg ( #4144 )
...
A working configuration example for Tronxy X5SA Pro printer (https://tronxy.com/x5s-series/x5sa-pro.html ) with no Touchscreen funcionalities because separated LCD firmware needed.
Silent TMC2225 drivers soldered on board.
The Self-levelling plate sensor is a blue Tronxy XY-08N model.
Direct Drive is a Titan Extruder Clone "3:1" gear ratio.
Signed-off-by: Morgan Barresi <morganfw@gmail.com>
2021-04-16 00:12:03 -04:00
3a023d0ff4
palette2: Fix get_status ( #4171 )
...
Signed-off-by: Clifford Roche <clifford.roche@gmail.com>
2021-04-15 13:53:06 -04:00
e7b0e7b43b
palette2: Add ping variation + ping status reports ( #4114 )
...
Signed-off-by: Clifford Roche <clifford.roche@gmail.com>
2021-04-14 11:37:24 -04:00
316b49c6bf
docs: Note that attribution/history should be avoiding in Example_Configs.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-13 21:14:46 -04:00
de8eb884b4
test: Add generic-bigtreetech-skr-2.cfg to printers.test
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-13 21:08:24 -04:00
b8186ac4cf
config: Add example generic-bigtreetech-skr-2.cfg config ( #4160 )
...
Signed-off-by: Lars R. Hansen <popshansen@hotmail.com>
2021-04-13 21:06:16 -04:00
dce9971aa9
stepcompress: Improve numerical stability of step+dir+step filter
...
Apply the step+dir+step filter even if, for some reason, a negative
time is found.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-11 12:19:57 -04:00
a93d09cdf4
docs: document bed mesh "faulty_regions"
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2021-04-10 11:16:07 -04:00
60372fd0cf
bed_mesh: introduce "faulty_regions" option
...
Users may define "faulty regions", locations within the mesh where a probed value is unreliable. When bed mesh generates points it will substitute points in faulty regions with up to 4 points nearest to the region. After calibration is complete the Z values at these points will be averaged and assigned to the original value inside the faulty region.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2021-04-10 11:16:07 -04:00
5f5dfbaa7f
bed_mesh: Allow user to clear the relative_reference_index via gcode
...
If a negative number is specified for the RELATIVE_REFERENCE_INDEX parameter clear the internal relative_reference_index.
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2021-04-10 11:16:07 -04:00
38b2805136
toolhead: Export the print_stalls value via get_status()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-09 20:44:27 -04:00
49a2b0354f
statistics: Export the OS and process load in a get_status() method
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-09 20:27:38 -04:00
cacf1197b6
docs: Minor changs to pca9533 in Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-09 17:50:30 -04:00
eb4abdd830
pca9533: RGB support for the mightyboard ( #4150 )
...
Signed-off-by: Marc-André Denis <marcadenis@msn.com>
2021-04-09 17:47:16 -04:00
b1b2488538
docs: Minor display sectoin updates to Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-09 13:07:40 -04:00
cf0c165361
Docs: Split the display section of Config_Reference.md into multiple sections
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-09 12:59:13 -04:00
26603e8369
docs: Minor copy-and-paste fix to Config_Reference.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-09 12:02:18 -04:00
317402d5ba
hd44780_spi: added lcd support to the mightyboard ( #4121 )
...
Signed-off-by: Marc-André Denis <marcadenis@msn.com>
2021-04-07 21:07:23 -04:00
165d2fc228
resonance_tester: Fixed multi-point resonance testing
...
Signed-off-by: Dmitry Butyugin <dmbutyugin@google.com>
2021-04-07 19:05:23 -04:00
bf01d6d1f8
config: Added config for Eryone Thinker Series ( #4096 )
...
Signed-off-by: Demetrius Apostolopoulos <dapostol73@hotmail.com>
2021-04-07 14:10:59 -04:00
c59da22707
docs: Add link to Discourse server in Example_Configs.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-07 13:30:29 -04:00
41999eb94d
stm32: CAN Kconfig typo
...
Fixed simple typo in the Kconfig and can.c. stm32f4 CAN Pins
Signed-off-by: Oliver Walter <oli1111@web.de>
2021-04-07 13:06:13 -04:00
689c2f9baf
stm32f1: reset peripherals in enable_pcclock()
...
Some bootloaders do not disable peripherals in use before jumping to the application. Reset peripherals to assure correct operation.
SIgned-off-by: Eric Callahan <arksine.code@gmail.com>
2021-04-07 12:57:21 -04:00
5729109727
stale-issue-bot: Increase stale warning from 3 weeks to 5 weeks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-07 11:08:14 -04:00
b5b2fe2d2b
bed_mesh: Perform initialization from klippy:connect instead of klippy:ready
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-02 13:50:38 -04:00
3cfc42e54a
bltouch: Minor indentation change
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-02 13:43:01 -04:00
2a9a133f36
bltouch: Raise the probe as soon as the endstop triggers
...
Start the raise sequence once the endstop notification arrives. This
can reduce the response time as it does not require waiting for the
homing sequence to fully finalize.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-02 13:43:01 -04:00
c9ae89e142
bltouch: Use hmove.check_no_movement() to verify bltouch deployed
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-02 13:43:01 -04:00
cdaf9379b0
pause_resume: Perform setup via "klippy:connect" instead of "klippy:ready"
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-04-01 10:10:39 -04:00
74d527776e
bed_mesh: lookup the toolhead object in "handle_connect"
...
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
2021-04-01 09:32:23 -04:00
d609753a6a
gcode_move: Make sure to call reset_last_position() in _handle_ready()
...
If reset_last_position() is invoked prior to the printer being
"ready", then the transform may not be properly accounted for. Handle
this by calling reset_last_position() when the printer becomes
"ready".
This should fix some "must home first" errors on extrude-only moves.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-31 22:15:54 -04:00
3390088d3a
skew_correction: Register during "connect" phase instead of "ready" phase
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-31 22:13:36 -04:00
20245d2e46
rotary_delta: Fix typo in get_status() homed_axes
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-29 23:05:34 -04:00
58a0eb76c5
homing: Pass the HomingMove class to homing_move_begin/end events
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-29 21:20:57 -04:00
37a263c0b9
homing: Move homing logic from manual_stepper.py to homing.py
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-29 21:20:57 -04:00
38719c1359
homing: Extract out movement verification to new check_no_movement()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-29 21:17:53 -04:00
d39f849203
homing: Separate homing/probing movement logic to its own class
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-29 21:17:53 -04:00
5002dda37c
homing: Move home_axes() into cmd_G28()
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-29 21:17:53 -04:00
df56c723b9
homing: Minor simplification of verify_movement tracking
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-29 21:17:53 -04:00
862d3f9633
homing: Move low-level probing logic from probe.py to homing.py
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-29 21:17:53 -04:00
da735ab312
toolhead: Make sure input_shaper movement starts after endstop checking
...
Add a dwell() to the start of drip_move() to ensure that input_shaper
movements scheduled in advance of the nominal move time aren't
scheduled prior to the homing start. (Otherwise the stepper may move
prior to endstop checking, which can corrupt the "no movement"
checks.)
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-29 21:11:39 -04:00
34bf8a04c7
config: Comment updates for recent "make menuconfig" updates
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2021-03-29 20:00:26 -04:00
00706dec21
output_pin: Fix bug in setting of self.resend_interval
...
Only set resend_interval if a mcu_duration is specified. This fixes a
bug introduced in commit 861144d8
2021-03-27 14:52:21 -04:00
20c96a8300
config: Update printer-robo3d-r2-2017.cfg
...
Improvements and fixes based on feedback:
* Make speeds and limits more conservative
* Fix Y endstop position
* Improve IR bed leveling
* Fix filament runout pin
Signed-off-by: Justin Schuh <code@justinschuh.com>
2021-03-27 12:55:17 -04:00
cc31810fa8
hall_filament_width_sensor: fix range check error ( #4113 )
...
Signed-off-by: Denis Ignatenko <deniss979@gmail.com>
2021-03-27 12:53:40 -04:00
Kevin O'Connor