cff61605fb
docs : make modifications to all md files to make them compatible with mkdocs
...
all markdown files must have a single H1 heading at the top.
Signed-off-by: Damien Martin <damlobster@gmail.com>
Update CNAME
2021-07-27 13:15:25 -04:00
2d6b44152a
bltouch: Recommend using a pullup on the sensor_pin
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-12-11 11:01:44 -05:00
f0c394de81
docs: Add stow_on_each_sample description to BL-Touch.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-05-11 12:46:25 -04:00
eebd7e6579
docs: Update bltouch probe_with_touch_mode documentation
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-05-11 12:46:25 -04:00
b2a29c6349
docs: Update BLTouch.md initial tests for users with a regular z endstop
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-04-02 17:34:15 -04:00
5d0658b91b
docs: Add BLTouch.md section describing clone config options
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-04-02 17:34:15 -04:00
291fbe0801
docs: Add touch_mode sensor test to BLTouch.md
...
Describe how to test the sensor pin using the BLTouch touch_mode.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2020-04-02 17:34:15 -04:00
16ecf15a91
bltouch: BTLOUCH V3.0/V3.1 Enable 5V/OD mode set commands ( #2540 )
...
Signed-off-by: Mike Stiemke <fandjango@gmx.de>
2020-02-23 22:32:07 -05:00
3665e9fc53
docs: Recommend safe_z_home over homing_override
...
Update BLTouch.md, FAQ.md, and sample-probe-as-z-endstop.cfg to
recommend using a safe_z_home config section over a homing_override
config section.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-11-07 16:50:52 -05:00
500f37821d
docs: Improve bltouch v3 documentation
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-05-26 11:09:32 -04:00
de124677b0
docs: Update BLTouch.md to refer to Probe_Calibrate.md for offset config
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-05 18:22:57 -04:00
9f9262cba8
docs: Minor wording changes to BLTouch.md
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-05 18:20:21 -04:00
54a2c5d58e
BLTouch: Use G90 in the BLTouch.md homing_override example
...
Reported by @sgtnoodle.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-05 17:49:58 -04:00
a5a6ae83ff
docs: Wrap BLTouch.md to 80 columns.
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-04-05 17:48:51 -04:00
15afcf69fe
docs: Improve the BLTouch documentation ( #1107 )
...
Signed-off-by Fred Sundvik <fsundvik@gmail.com>
2019-01-25 12:53:00 -05:00
df42887193
docs: Bltouch documentation ( #1073 )
...
Add documentation on howto configure the BL-Touch device with
Klipper. A second paragraph addresses possible issues with BL-Touches
Signed-off-by: Wilfried Goesgens <dothebart@citadel.org>
2019-01-05 20:24:35 -05:00
Damien