96acfdc6d2
docs: Minor rewording of Marlin pin number section of FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-26 23:06:32 -04:00
a27e82aef3
docs: Add a section to the FAQ on translating Marlin pin numbers
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-24 21:43:53 -04:00
f2d232ef77
force_move: Provide defaults for SET_KINEMATIC_POSITION parameters
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-02 08:58:18 -04:00
0025fbf10d
toolhead: Replace junction_deviation with square_corner_velocity
...
The junction_deviation configuration parameter has a number of quirks
that make it difficult to configure. Replace it with a
"square_corner_velocity" configuration parameter.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-16 10:32:43 -04:00
2c4ca88887
docs: Update documentation to note use of /dev/serial/by-path/
...
When using multiple micro-controllers it may be necessary to use an id
from /dev/serial/by-path/ instead of /dev/serial/by-id/. Also,
emphasize that in config/example-multi-mcu.cfg.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-01 17:22:03 -04:00
42ca985bef
docs: Add reference to homing_override in FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-20 19:33:54 -04:00
cd9e21e3aa
FAQ: Add item on TMC2208 being disabled in the middle of a print
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-05 13:06:55 -04:00
22c49a7c3f
docs: Improve FAQ update software entry (use make menuconfig ; make clean)
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-04-25 10:29:55 -04:00
832c0bc017
docs: Add more hints to use /dev/by-id/ for the serial device
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-04-20 11:57:49 -04:00
c539fed8bb
docs: Add additional information to FAQ on heater checks
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-04-09 22:00:26 -04:00
039bb9f10f
docs: Add Patreon link to FAQ page
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-03-31 13:55:41 -04:00
ef820d98f6
docs: Add "will heaters be turned off on a crash" item to FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-03-13 11:36:45 -04:00
82a65e9f4a
docs: Note the use of the virtual_sdcard feature
...
Note that virtual_sdcard helps on slower machines.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-03-02 11:28:01 -05:00
054cbbe094
docs: Add a FAQ item on steps to upgrade the software
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-01-12 18:38:49 -05:00
83e9e92b9a
docs: Add a table of contents to the FAQ
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-01-05 11:42:00 -05:00
29c83cec22
docs: Update installation document with pointers to FAQ
...
Add some pointers to the FAQ for common pitfalls during installation.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-01-04 13:29:17 -05:00
8944e2104d
docs: Add FAQ item on AVR watchdog restart failures
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-12-11 18:17:14 -05:00
319221ee23
docs: Provide additional information on "make flash" failures
...
Add some additional information on "make flash" problems.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-12-11 17:33:29 -05:00
37788c1e55
docs: Add a FAQ document
...
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2017-11-30 15:19:40 -05:00
Kevin O'Connor