Commit Graph

13 Commits

Author SHA1 Message Date
lorf 54683c9535 tmc2208: Decode register fields in DUMP_TMC (#1156)
Report values of TMC2208 register fields in DUMP_TMC command to help in
tuning and diagnostics.

This also adds functions to refer to register fields by name for TMC drivers
and register mappings for TMC2208.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Dmitry Frolov <dmitry.frolov@gmail.com>
2019-02-02 19:46:27 -05:00
Kevin O'Connor 5bb0bd755d tmc2130: Use bus.py helper code for spi
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-11-21 12:12:31 -05:00
Kevin O'Connor def524bdf4 endstop_phase: Add support for detecting phase via TMC stepper drivers
The Trinamic stepper motor drivers are capable of reporting the
stepper phase - add support for using that capability to the
enddstop_phases module.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-10-16 13:09:23 -04:00
Kevin O'Connor 30013a1fb8 mcu: Rename add_config_object() to register_config_callback()
Change the name of the config registration method and pass an explicit
reference to the callback to the new method.  This makes the
relationship between mcu registration and build_config() more clear in
the calling code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-09-03 11:48:22 -04:00
Kevin O'Connor afd5d55c00 tmc2130: Minor code cleanup
Rework the code to use set_register() with the string name of the
desired register to set.  Add a get_register() method.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-08-27 12:47:24 -04:00
Kevin O'Connor 273a98d39a pins: Explicitly pass can_invert and can_pullup to lookup_pin()
Don't pass pin_type to lookup_pin() - instead, if a pin can be
inverted or can have a pullup, then the caller must explicitly specify
that when calling lookup_pin().  This simplifies the code for the
cases where it is not valid to invert or pullup.

Explicitly pass the pin_type to setup_pin() and have ppins.setup_pin()
apply default pullup and invert flags.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-07-26 09:44:45 -04:00
Kevin O'Connor b41770caa6 tmc2130: Add a DUMP_TMC helper command
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-06-30 19:01:56 -04:00
Kevin O'Connor 5ae22a5e51 tmc2130: Allow the PWMCONF register to be configured
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-25 11:38:27 -04:00
Kevin O'Connor 1e6fa5722a tmc2130: Initial support for sensorless homing
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-25 11:38:23 -04:00
Kevin O'Connor 26246b1f28 tmc2130: Use an SPI rate of 4Mhz
The spec recommends 4Mhz for SPI, so use that.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-25 11:38:18 -04:00
Kevin O'Connor 3799f40f29 tmc2130: Configure stealthchop velocity limit
Change stealhchop config option to a stealthchop_threshold
configuration option.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-25 11:38:12 -04:00
Kevin O'Connor c4fe43ffce tmc2130: The default TOFF time should be 4
The recommended TOFF time in "standalone mode" according to the
tmc2130 is 4, so use that as the default.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-24 10:44:45 -04:00
Kevin O'Connor 680c92de40 tmc2130: Add initial support for TMC2130 stepper motor drivers
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2018-05-20 18:03:06 -04:00