3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3,274 Commits 1 Branch 0 Tags 27 MiB
Commit Graph

558 Commits

Author SHA1 Message Date
Kevin O'Connor 5d0658b91b docs: Add BLTouch.md section describing clone config options 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-04-02 17:34:15 -04:00
Kevin O'Connor 291fbe0801 docs: Add touch_mode sensor test to BLTouch.md 
Describe how to test the sensor pin using the BLTouch touch_mode.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-04-02 17:34:15 -04:00
Kevin O'Connor 3c01b60a88 docs: Update FAQ with TMC2208 "standalone" mode workaround 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-03-29 11:08:49 -04:00
David Smith d4bf61262e
Extruder: Add g-code to set extruder step_distance (#2598) 
Signed off by: David Smith <davidosmith@gmail.com>
 2020-03-28 09:52:46 -04:00
Kevin O'Connor 849cc075dc docs: Fix typo in MANUAL_STEPPER command line 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-03-23 15:06:32 -04:00
Jeremy Briffaut 6be552f6e6 Allow manual_stepper to run in parallel than an other stepper 
Signed-off-by: Jeremy Briffaut <kakou@kakou.org>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-03-23 14:43:34 -04:00
Kevin O'Connor 0c9eb519ff docs: Update Manual_Level.md Z_ENDSTOP_CALIBRATE instructions 
The endstop must not be triggered at the start of Z_ENDSTOP_CALIBRATE.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-03-22 11:18:31 -04:00
Kevin O'Connor 7543876487 docs: Add info on S3D "extra retract distance" to Slicers.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-03-22 11:00:02 -04:00
Kevin O'Connor 5e39d346ed display: Use the active extruder in the default 16x4 screen layout 
Change the default layout to show the active extruder (not always the
first extruder).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-03-13 21:50:38 -04:00
Garth Snyder 0ba83c5b04
docs: clarify behavior of M204 with only one of P or T (#2564) 
Signed-off-by: Garth Snyder <garth@garthsnyder.com>
 2020-03-11 13:03:48 -04:00
Kevin O'Connor 3850b3d27a docs: Fix date of menu change in Config_Changes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-03-08 17:42:22 -04:00
Kevin O'Connor d39c4fe628 menu: Disable support for "deck" and "card" menu items 
Disable support for customizing the main lcd display content via the
menu system.  Advise users to use the new display_data config sections
as a replacement.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-03-08 17:38:24 -04:00
Kevin O'Connor 63ba7d231e docs: Minor updates to Code_Overview.md 
Minor indentation change.  Update for change to stepcompress_append().

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-03-02 21:54:22 -05:00
Denis Ignatenko f84542cd20
hall_filament_width_sensor: Added virtual runout sensor (#2535) 
Signed-off-by: Denis Ignatenko deniss979@gmail.com
 2020-03-01 22:05:12 -05:00
Kevin O'Connor 26523d77ba docs: Minor wording change to Endstop_Phase.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-03-01 11:40:13 -05:00
FanDjango 16ecf15a91
bltouch: BTLOUCH V3.0/V3.1 Enable 5V/OD mode set commands (#2540) 
Signed-off-by: Mike Stiemke <fandjango@gmx.de>
 2020-02-23 22:32:07 -05:00
Kevin O'Connor 15f21be5ec manual_stepper: Support ignoring errors on STOP_ON_ENDSTOP 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-02-19 13:38:22 -05:00
Kevin O'Connor 01d985a739 docs: Recommend RPi 2 or later in Installation.md 
Reported by @patrickkettner.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-02-17 20:49:32 -05:00
test3210-d 9a65a4569b hall_filament_width_sensor: Add new filament sensor 
Signed-off-by: Denis Ignatenko <deniss979@gmail.com>
 2020-02-14 13:14:34 -05:00
Kevin O'Connor c3899cefa8 configfile: Add get_status() to export raw config file information 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-02-13 22:04:40 -05:00
Kevin O'Connor 512ad4b3a4 query_endstops: Add get_status() method that reports the last query state 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-02-12 19:32:48 -05:00
David Smith 596f5e3e3a
stepper_enable: Add SET_STEPPER_ENABLE gcode command (#2463) 
Signed-off-by: David Smith <davidosmith@gmail.com>
 2020-02-10 22:34:11 -05:00
Kevin O'Connor c36fe76d69 probe: Add support for configuring lift_speed 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-31 15:47:06 -05:00
Kevin O'Connor 2f8ad5e6ac docs: Update Config_Changes.md with actual bed_mesh merge date 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-09 14:17:51 -05:00
Arksine 46d0c6bdfc docs: Update Config_Changes.md to reflect bed_mesh changes 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-01-09 14:14:13 -05:00
Arksine edae40c36f docs: Update documentation to reflect bed_mesh changes 
Also add new bed_mesh.md documentation.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-01-09 14:14:13 -05:00
Kevin O'Connor 3fb0b7e4bc docs: Update Command_templates.md - numbers in gcode_macro name must be at end 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-07 20:58:39 -05:00
Kevin O'Connor 005cfea5c3 gcode: Fix detection of some "extended" g-code commands 
Fix typo that resulted in _get_extended_params() being called for all
commands.  Allow "extended" g-code commands to contain numbers.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-07 19:17:20 -05:00
David Smith 6972b6303d docs: Updates for gcode_macro naming (#2317) 
Add note about numbers in macro names.  Add note about variable name case restriction. Add set variable example.

Signed-off-by: David O Smith <davidosmith@gmail.com>
 2020-01-06 10:59:40 -05:00
Kevin O'Connor baa0d2ff8c docs: Minor formatting change to Config_checks.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-06 10:45:53 -05:00
Kevin O'Connor 5ff45636d9 docs: Minor FAQ updates 
Fix rendering of Patreon URL in FAQ.  Use same "ls" command to find
the serial port that Installation.md uses.  Note Raspberry Pi 4 is
supported.  Note problems with ModemManager.  Point to Bed_Level.md in
Z position_endstop question.  Link to Config_checks.md in "Z
screaching" FAQ.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-06 10:45:48 -05:00
Kevin O'Connor dabffcc22c kin_extruder: Convert pressure advance to use "weighted average" 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-20 12:21:58 -05:00
Kevin O'Connor b921b8a1c1 docs: Document support for M204 P and T parameters 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-18 16:34:45 -05:00
Kevin O'Connor 0a86190bae display: Revert "display: Add ST7567 display support (#1540)" 
This reverts commit 1b92af6078.

The standard "uc1701" lcd_type can now be used in place of the custom
"st7567" lcd_type.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-18 12:30:20 -05:00
BlackStump 7532e4ccea scripts: Replicape pru update start scripts (#2277) 
Signed-off-by: Trevor Wilson <altocoey@hotmail.com>
 2019-12-18 12:11:40 -05:00
Kevin O'Connor 254789f4c5 neopixel: Add support for delaying updates in SET_LED command 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-15 23:24:17 -05:00
Kevin O'Connor 1d05a34cd7 docs: Update Kinematics.md document with "smooth pressure advance" 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-13 17:52:51 -05:00
Kevin O'Connor 91bade5824 docs: Update Config_Changes.md with pointer to sample multi extruder configs 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-13 12:33:13 -05:00
Simon Kühling 2721211456 heater: Add PrinterHeater get_status() function 
Provide a list of available heater and sensor names to
gcode macro templates through the printer.heater.available_heaters
and printer.heater.available_sensors variables

Signed-off-by: Simon Kühling <mail@simonkuehling.de>
 2019-12-13 10:45:04 -05:00
Kevin O'Connor fcee27fc19 gcode: Remove builtin T0/T1/T2/... command support 
The builtin Tn command is not sufficiently flexible to control some
multi-extruder printers.  Remove the command and encourage users to
define individual gcode_macros for each Tn instance.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-10 14:24:32 -05:00
Kevin O'Connor c06618193d extruder: Add an ACTIVATE_EXTRUDER command 
Add support for an extended g-code command to change the currently
active extruder.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-10 14:23:13 -05:00
Kevin O'Connor ab2d302b7e gcode: Remove support for the M206 command 
The M206 command isn't particularly standardized and isn't issued by
default from 3rd party software in their standard configurations.
Encourage users to use the more powerful SET_GCODE_OFFSET command.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-10 14:23:10 -05:00
Kevin O'Connor 8663bc8192 docs: Update FAQ to emphasize checking Config_Changes.md on an upgrade 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-10 13:51:47 -05:00
Kevin O'Connor 205da598fd docs: Move upgrade instructions to the last item in the FAQ 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-10 13:39:49 -05:00
Kevin O'Connor 10270dc7ef docs: Fix another typo in Code_Overview.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-04 12:26:45 -05:00
Kevin O'Connor f82a85aad0 docs: Fix typo in Code_Overview.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-04 12:17:13 -05:00
Kevin O'Connor e17f2bac96 docs: Minor "coordinate system" wording change to Code_Overview.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-04 12:05:31 -05:00
Kevin O'Connor e557f2d0c0 docs: Add information on coordinate systems to Code_Overview.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-04 11:09:22 -05:00
Kevin O'Connor 8e87ab0939 gcode: Remove support for "G4 S1" style commands 
The S parameter is not a standard and was not commonly used.  The P
parameter (delay specified in milliseconds) is the commonly accepted
g-code mechanism for dwelling.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-02 19:31:20 -05:00
Kevin O'Connor 43bb45a1d3 docs: Minor update to Config_Changes.md 
Use same "ls /dev/serial/by-id/*" command used in Installation.md.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-01 14:25:40 -05:00
Kevin O'Connor 935088ddff docs: Clarify recent usb device name change in Config_Changes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-01 10:29:15 -05:00
Kevin O'Connor e80ced5568 usb_cdc: Report MCU type on all boards 
Always report the "product id" as the MCU type (instead of as "Klipper
firmware").

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-26 08:45:20 -05:00
Kevin O'Connor 401f7a879c atsam: Enable chipid as usb serial number 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-26 08:42:14 -05:00
Kevin O'Connor d7ec5505a6 atsamd: Enable chipid as usb serial number 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-25 19:30:31 -05:00
Kevin O'Connor 8f6efe5a7b stm32: Enable chipid as usb serial number 
Signed-off-by: Matt Baker <baker.matt.j@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-25 19:30:31 -05:00
Kevin O'Connor 0b0e5a911e docs: Minor wording change in Pressure_Advance.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-25 11:48:41 -05:00
Kevin O'Connor 3aad25eab9 docs: Recommend normal slicer settings in Pressure_Advance.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-25 11:35:39 -05:00
Kevin O'Connor 3683273936 toolhead: Report which axes are homed via get_status() 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-24 20:21:13 -05:00
Kevin O'Connor 282af0220e toolhead: Report the current extruder from the get_status() method 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-24 20:21:13 -05:00
Kevin O'Connor 982567a69a config: Rename avrsim.cfg to generic-simulavr.cfg 
Rename the file to be more similar to the naming of other files.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-24 20:21:13 -05:00
Kevin O'Connor c188aa982f docs: Kinematics.md updates for extruder instantaneous corner velocity 
As of commit 5f5896ad Klipper will perform look-ahead between moves
even if they have significant differences in extruder flow rates.
Update Kinematics.md accordingly.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-22 17:04:14 -05:00
Kevin O'Connor 6d0c55b6c1 extruder: Initial support for "smoothed pressure advance" 
Support averaging the extruder position over a time range to "smooth
out" the velocity changes that occur during pressure advance.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-21 13:18:19 -05:00
Kevin O'Connor 430b8d0e52 usb_cdc: Report the MCU name instead of "Klipper firmware" 
Change the "product id" from the redundant "Klipper firmware" to the
CONFIG_MCU value.  For now, only make this change on boards that have
CONFIG_HAVE_CHIPID set.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-21 11:56:31 -05:00
Kevin O'Connor 9055e9f9b5 docs: Update SAMD51 benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-18 12:49:05 -05:00
Kevin O'Connor 224574da4a stepper: Add get/set_tag_position() and convert calc_position() 
Rename calc_position() to calc_tag_position() and have it calculate
the value of the position from the last stepper set_tag_position()
call.  This enables the calc_tag_position() code to be more flexible
as it can be run with arbitrary positions.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-13 19:00:17 -05:00
Kevin O'Connor 0bf4ab66da docs: Add get_status() to list of kinematics methods in Code_Overview.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-12 22:47:10 -05:00
Kevin O'Connor 6116a5d48f stepper_enable: Remove ability to use a list of pins in enable_pin 
Now that the tmc drivers perform automatic soft stepper enabling,
there is no need to be able to list multiple pins in the enable_pin
config setting.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-12 18:45:31 -05:00
Kevin O'Connor 77dff35fae tmc: Remove virtual_enable support and replace with automatic support 
Automatically detect if the stepper has a dedicated enable line.  If
it does not, then automatically enable virtual enable support.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-12 18:45:31 -05:00
Kevin O'Connor bfb34e0701 stepper_enable: Move motor_off() logic to stepper_enable.py 
Directly disable all the stepper motors on a global motor_off() from
the StepperEnable() class in stepper_enable.py.  This simplifies the
toolhead and kinematic classes.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-12 17:32:18 -05:00
Kevin O'Connor 0bfb655f66 query_adc: Add a new module to help query and debug analog pins 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-07 19:28:27 -05:00
Kevin O'Connor 3665e9fc53 docs: Recommend safe_z_home over homing_override 
Update BLTouch.md, FAQ.md, and sample-probe-as-z-endstop.cfg to
recommend using a safe_z_home config section over a homing_override
config section.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-07 16:50:52 -05:00
Kevin O'Connor ed610a6600 extruder: Consistently use "extruder" for the primary extruder 
No longer allow the primary extruder to be named "extruder0".  This
avoids internal and external confusion between the printer objects and
config section names.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-07 16:28:47 -05:00
Kevin O'Connor 29b5961d9f docs: Note gcode_arcs and firmware_retraction commands in G-Codes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-07 15:44:25 -05:00
Kevin O'Connor 72735b4552 docs: Update Code_Overview.md with new trapq system 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-07 10:42:12 -05:00
Kevin O'Connor 3f338c08c1 docs: Minor micro-controller updates to Code_Overview.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-07 10:08:21 -05:00
Kevin O'Connor e2f5e2871c docs: Recommend OctoPrint v1.3.12 in Installation.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-30 11:02:03 -04:00
Kevin O'Connor d65f2e2861 docs: Minor cleanup to square_tower.scad 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-27 12:16:17 -04:00
Kevin O'Connor 632ff9e55a docs: Update benchmarks for stm32f0 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 21:45:07 -04:00
Kevin O'Connor f160a3a824 docs: Reword Pressure_Advance.md paragraph on kinematic impact 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 19:50:51 -04:00
Kevin O'Connor ccbdb6c531 docs: Pressure_Advance.md should recommend setting ADVANCE_LOOKAHEAD_TIME 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 19:34:59 -04:00
Kevin O'Connor c794e11c67 docs: Update Pressure_Advance.md to use tuning tower 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 19:28:03 -04:00
Kevin O'Connor b8a6160646 docs: Update example openocd config in Bootloaders.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 19:05:04 -04:00
Kevin O'Connor f07292084b docs: Remove outdated stm32f1.md document 
The stm32f103 has become popular in the "skr mini" series of boards.
As a result, the stm32f1.md document is no longer relevant.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 18:53:11 -04:00
Kevin O'Connor abdfd92e99 docs: Update release notes for v0.8.0 release 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-21 22:30:04 -04:00
Kevin O'Connor dd9259aaf3 docs: Minor wording changes to Manual_level.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-16 16:48:50 -04:00
Kevin O'Connor 4811b58b39 docs: Update Manual_Level.md with recent config changes 
The sample count and associated settings are no longer in the
screws_tilt_adjust config section - they are now in the probe config
section.  Remove them from the guide.

Reported by @theopensourcerer.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-16 16:35:32 -04:00
Kevin O'Connor dd77b46de9 docs: Note AD849x support in Features.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-15 13:08:43 -04:00
Kevin O'Connor 4ef0db5087 docs: Update Config_Change.md with safe_z_homing change 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-03 18:09:01 -04:00
Nils Schulte 27717440aa docs: Update Sensorless_Homing.md with new TMCs (#1958) 
Signed-off-by: Nils Schulte <git@nilsschulte.de>
 2019-10-03 17:56:40 -04:00
Kevin O'Connor 698159921f tuning_tower: Tool for tuning parameters based on print Z height 
This adds a testing tool that can run a command on each Z layer of a
print.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-01 14:46:24 -04:00
Kevin O'Connor 1b8a007969 docs: Add a square_tower.scad and stl print object 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-01 14:46:24 -04:00
Julien Lirochon 0c247e55e6 probe: Add range to probe accuracy results (#2015) 
Signed-off-by: Julien Lirochon <julien@lirochon.net>
 2019-09-29 16:56:46 -04:00
Master92 3a37d4a208 safe_z_home: Hop only if necessary and add option to move xy back 
Once a hop is performed, it will only be re-issued if the z-axis has been
moved in the meantime. Usually it is only moved by a z-homing so doing so
will cause safe_z_home to do the hop on the next homing action.

When z-axis is homed, x and y positions are known. When setting this
boolean option, these are set back to their last positions.

Whenever a hop is specified it is re-issued after the Z axis has been
homed. This is especially necessary when a pressure-based probe is used.
Also, the module decides if a hop is necessary, based on either a known
Z position or a flag that is set whenever the motors are disabled.

Signed-off-by: Nils Friedchen <Nils.Friedchen@googlemail.com>
 2019-09-18 09:37:33 -04:00
Kevin O'Connor a78329d0b2 docs: Add additional "no delay" benchmarks to Benchmarks.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-08 10:37:25 -04:00
Kevin O'Connor 3a2d71038f docs: Update stm32f103 benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-08 09:27:37 -04:00
Kevin O'Connor 7580fa2354 docs: Update sam4s8c benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-08 09:13:51 -04:00
Kevin O'Connor 8211415231 docs: Update sam4s8c step benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-08 01:12:11 -04:00
Kevin O'Connor d90116ef39 docs: Use tables for tick rates in Benchmarks.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-08 00:48:01 -04:00
Kevin O'Connor a344f6d2ad docs: Update AVR benchmarks to use gcc v5.4.0 
Current versions of OctoPi ship with avr-gcc v5.4.0, so update the
benchmarks to use that version.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-06 13:24:20 -04:00
Kevin O'Connor f8b25a0104 docs: Update USB transfer benchmarks 
It appears that the faster micro-controllers may have their transfer
speeds limited by the host USB controller.  Rerun the usb transfer
benchmarks using a high-speed hub.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-06 13:07:08 -04:00